Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (108 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.Sales rep all but guaranteed these were made in the USA by Dexter for etrailer, CHINA is cleverly hidden INSIDE the drum. They are not made in the USA, but CHINA doesn’t ALWAYS mean junk. Time will tell, but the last set of China drums were destroyed in one year. 2012 Ram factory controller set at 3.5 empty, 6.5 loaded around 9k. 20’ enclosed car trailer.
Katrina B - 04/18/2023I just received the two boxes of drums that I'm going to use to put brake on both axles. The UPS delivery driver said that one of the boxes was beat up and there may have been parts lost. It was packed with plastic cap over the outside bearing that prevented the bearing from coming out. GOOD job! Now if you can get away from "made in china" I'd be a lot happier. Additional cost of made in AMERICA for be worth it.
Hub and drum are great. Would have given 5 stars, but poor packaging and rough shipping led to the hub penetrating the box and the dust cover was lost through the hole.
Jenny N - 12/07/2022Packaging is horrible , one came in a completely different box all taped up , and another poking through the box that is scratched and dinged up
Exactly as described. Easy to install!
Came as described!
Had a shipping problem. Was resolved quickly and item replaced. Excellent customer service!!
Very knowledgeable! Quick shipping too !!
I have received 4 hubs and they were delivered Undamaged. I’ve installed 3 thus far. They fit perfectly. As soon as I get the forth one installed I’ll take the trailer out and test them. So far so good.
Michael - 03/16/2022The description didn't say it came with ezlube grease caps. I bought them separately but turns out they were included. Now i get to return them.
Product arrived on time just as described. Web site was detailed with measurements and ordering and communications were great. I recommend this company and it's products.
these hub and bearing kits come a fair price..easy to install..and made my trailer rebuild safe and useful for years to come..would purchase again,,if needed for another trailer restoration...
steve h - 03/04/2019It replaced the old drum and hub, electric brake assemblies, it was an exact fit. The outer bearing race was loose in the old hub drum assembly, that was the reason of my repair endeavor. I am very happy with the service I received from Etrailer.com... Thanks George J. for your effort in getting the replacement parts to me. I am considering doing right side of my axle for the sake of uniformity, as am writing this review!
This is a Spare Hub for my Car/Equipment trailer .When not if you have a bearing Failure just change the Hub, no need to try to beat gaulded bearing Races out on the side of the Road !! But if its a easy Bearing Change they are included with this Kit .
Haven't put them on yet but everything matched up except the rear bearing and seal. I have an older trailer and the axels are different the old bearing still fit just fine in the hub. The delivery time was very impressive. When I get the trailer done I'll post some picks.
Trailer hub and drum assemblies purchased to replace original units on a 2002 tandem wheel boat trailer. The assemblies were quality units that fit perfectly, installation was easy.
Trailer brakes and drums arrived is perfect condition. Put them on the same afternoon they arrived. The fit is great and installation was easy. Great product for the do-it-yourself-er.
I am very pleased with the Loaded backing plates, drums, bearings and tandem axle hanger kit. All appear to be better quality than what came on the trailer originally
Very well made. Good fit and installed easily. Comes with new grease caps and lug nuts. Used these in conjunction with new brake assemblies. No problems and performs well. Would recommend these to anyone.
I ordered four 5200lbs electric brake assemblies and 2 drum/hubs. The items were shipped quickly and arrived complete and were a perfect fit for my trailer. The best part was the savings over a local trailer supply store. Etrailer was almost half the price!!
Excellent products and great customer service everything fit perfect
Nothing fancy, but exactly what I needed to replace the trailer hubs on the trailer. Have pulled the trailer close to a 1,000 miles and no problems. Thanks etrailer for the great products.
I installed, and adjusted the 4-items : AKHD-655-6K drum assembles without any problems.
Also glad I ordered the extra RG06-090 seals with 2.125 diameter because they turned out to be the correct ones.
I highly recommend etrailer parts to anyone looking for good quality products.
These were a perfect fit for my 1975 Hale Livestock trailer. It's very nice to have working brakes again. Now I need to order parts for the car hauler.
I replaced backing plates, shoes, hardware, drums, and bearings on both axles of my 20' deck over trailer. Parts arrived quickly and fit great. Very happy with my purchase.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.