Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 9/16" studs included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (36 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 9/16" studs included.Perfect, only place i found that sold this with the heavier 9/16 studs and didnt mark it up an extra 100 bucks because of it ..Great people to do business with
I replace my brakes every 3 or 4 years. It's almost impossible to find a shop that CAN or will turn the inside face where the magnet wears so replacement is the only option. These are a great deal & work well. ALWAYS be sure to get the correct stud diameter when you order!
Received fast and it all worked great, still working.
I purchased 4 of these wheel assemblies for my 1993 boat trailer. It was far cheaper to replace the entire assembly than to buy all the peices and put it together myself. The parts were all high quality, and included evrything except the headache of assembly. I'll be back in 20 years or so. :)
Gary
6/13/2018
The items mentioned are still working well. I have been so pleased with my etrailer purchases that we bought 4 new tires and rims from you this spring. Paid less for 4 tires and rims than the local dealer wanted for two tires, no rims.
Much easier to replace the whole assembly, one year later trailer brakes working great…
Great replacements for worn drums/hubs. Most machine shops can't/won't turn the magnet surface so replacement is the best solution. There are 3 size of studs listed, be sure you order the correct studs for your application. Nice having bearings & seal included in one package. Be sure to clean the machined surfaces in the drum with brake cleaner or lacquer thinner to remove the preservative. Pack the bearings with grease, install the seal and you are ready to go!
I purchased new brakes for my boat trailer, electromagnetic drums and the price and quality were excellent. Had one small issue with the packaging and it was promptly corrected.
I would highly recommend etrailer!!
A direct replacement for the original hub and drum assemble. Bearings are pre-greased so installation was quick and easy. Shipping was fast, customer service was excellent and reasonably priced.
All of the items we ordered for the goose neck trlr. seemed to be a great product. The hubs, brakes and bearing buddies looked and felt to be a superior product. We would definitely would purchase these items again if needed. Usage and time will tell the whole story of reliability.
Purchased as a spare in case of issues while on long trips with drag car and trailer. New trailer 8 lug and old spare was a 6 lug. Needed one quickly before long trip a week away. You had it in stock and shipped free in two days. Great prompt service. Much appreciated.
The best way to do a brake job on a trailer…replace it all, quick, inexpensive, easy!
At this time everything is running well but soon I’ll have the bearings repacked and will know more. Then I can write a better review
Everything was done easily and delivered on time. Only one problem came about. I opened the package to for the hardware for hubs and one of the seals was damaged very badly and wasn't usable at all. Glad I had one already. Other than that all was good
I order all my trailer needs from e-trailer they have great quality and fast shipping Thanks etrailer. Doug
Thank you so much etrailer. This Team is so easy to do business with
The part fits. The price is fair. This is installed and in the field working. Great experience.
Great service. Very professional staff to work with. Right product good timing.
Item was as described and arrived in good condition. Item shipped in a timely manner.
Best in the business!
Didn't know it came with the nuts and c aps
Very fast shipping ordered it and it went out the same day
Great customer service. Very informative and fast shipping
Very Fast shipping!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kenton
4/8/2023
Still working fine. about due to repack the bearings but Ill wait for warmer weather.