bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 8 on 6-1/2 Inch
  4. For 7000 lbs Axles
  5. Hub with Integrated Drum
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
  9. 17-1/2 Inch Wheel
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased

Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased

Item # AKHD-865-7-2-EZ-K
Our Price: $120.60
Trailer Hubs and Drums
Shipping Weight: 28 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased part number AKHD-865-7-2-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (124)
  • Q & A (0)
  • Photos
  • Used (1)

etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-7-2-EZ-K

  • 8 on 6-1/2 Inch
  • For 7000 lbs Axles
  • Hub with Integrated Drum
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • Easy Grease
  • EZ Lube
  • Pre-Greased
  • 1/2 Inch Stud
  • 14125A
  • 25580
  • etrailer

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


Specs:

  • Application: 5,200-lb, 6,000-lb, and 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 12-15/16" diameter x 2-3/8" wide
    • Works with 12" brake assembly
  • Bolt pattern: 8 on 6-1/2"
  • Wheel studs: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 2.72"
  • Weight capacity: 3,500 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KBD2-865-19 AxleTek 12" Hub and Drum Assembly for 5,200-lb, 6,000-lb, and 7,000-lb Axle with Hardware - 8 on 6-1/2 - EZ Lube - Pre Greased

Compare to Dexter 42866UC3-EZ





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased - AKHD-865-7-2-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (124 Customer Reviews)

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.

by:

axeltech brake drums seem to be sufficient. Although different from the OEM. Some of the issues where shipping. UPS damages every box from etrailer. So far anyways.



by:

Customer service and ordering was great, product great but how they're packaged did not survive. Missing 2 of 4 hub grease caps and 2 of 4 bent beyond use. I used the old caps



by:

Dimensions are different but may line ok. Grease cap damaged



by:

Bought 4 hubs for my trailer and every single box was destroyed and the dust/grease caps were all bent. 4/4 were so bent they were unusable. I had 4 spares I keep in the toolbox luckily or I would’ve been waiting for more parts. Hubs are great but packaging/delivery/dust caps very poor



by:

Although not as robust (heavy) as the original Dexter hub and drum it fit perfectly and the manufacturing quality was acceptable.
However, I suggest stronger packaging as the package the drum was delivered in was damaged, and fortunately the drum was not.



by:

They were a perfect fit on my 7000 lb Dexter axle. Liked that they came fully greased and ready to slide right on. Some of the dust covers were bent and unusable but the mix of new and old covers I got the job done. I would recommend them to anyone who has the proper axle fit. Will buy again when I need them again in the future.



by:

Bought these to save myself time by getting pre packed drums. When they arrived, I found several problems. They come with plastic caps to cover openings. The inside cap came off on all 4 and spread grease on the inside of all the drums. The outside cap came off on 2 allowing the outside bearing to come out and spread grease everywhere inside. The other two outside bearings were not packed.

Not happy with this purchase. Ended up spending an hour cleaning and packing bearings.

Etrailer Expert

Jenny N.

2/13/2023

I have a few questions for you about the experience with the grease caps. What kind of spindles does your trailer have? This hub assembly comes with two different kinds of grease caps, one for regular spindles and one for EZ lube sprindles. The EZ lube spindles will have grease zerk fittings on the end of them. The grease cap to use with it will be the one with the black rubber center that you can remove to access the grease fitting. The regular spindle would use the solid grease cap that would then contain the grease. The grease caps, of course should not fall off, however it sounded like it was possible that the EZ lube grease cap was used with the regular spindle so I wanted to ask. I look forward to your reply.

Darin

2/13/2023

I appreciate the explanation but I am not referring to the dust caps that are installed. I am talking about the shipping grease plugs they installed to prevent the greased bearings from coming out during shipping

Etrailer Expert

Jenny N.

2/13/2023

My mistake! I read the review as having installed the hubs and then experienced the issues. I will have my Customer Service team reach out as yes, those PLUGS should also not come loose in shipping. I am sorry it was a mess to clean up.



by:

Easy install



by:

Nice to have the bearings packed and seal already in. The only thing is the drum looks to not be as heavily built as the Dexter drum that came off my 5th wheel! The new one does not have the cooling fins on the drum like the Dexter does! In time i will see if its as good as the Dexter!



by:

Excellent company to work with. As with previous orders, fast, FREE shipping is always appreciated.
Items arrived exactly as described, properly packaged, in unblemished condition.
All parts included for installation, WITH THE EXCEPTION of the cotter pins for the axle nut(s). Those are easily found at the local hardware store, but would have been nice to have new ones with the package of new parts. Definitely recommending your business to family and friends. Thanks again!!



by:

Thanks for the excellent service of etrailer. The product got delivered very fast at home. The drum was in perfect shape and easy to install on the fifthweel.



by:

This was an absolute perfect fit. Gwen was amazing with her product knowledge and patience with me. I am a DIY'er and had no clue as to what I was looking at! Gwen walked me through step by step on how to make sure we had the correct product! This was an amazing experience! Thank you Gwen!!



by:

Excellent customer service and very knowledgeable associates.This was my second purchase from E trailer and shipped and arrived promptly.



by:

Great parts, included all the hardware for easy installation. My wife had no problems at all putting these on my trailer.



by:

I just did a 1300 mile trip and everything went smoothly with my drums and bearings



by:

Great product at half the price as the big brand name. etrailer has been great to deal with now and in the past with a highly knowledgeable staff and as always fast delivery.
Thanks again

Joe B.

2/17/2021

So I have never used it because I bought it so I would have a spare in the event I broke down on the highway. As for the quality it’s as good as the major brand that is twice as expensive. I wouldn’t have a problem buying another one when I need it .



by:

Troy, the service rep that I dealt with on my most recent order from etrailer.com, did a fantastic job helping me identify the exact parts I needed to replace the wheel bearings and brake assemblies on my 40 foot Big Horn 5th Wheel. I believe the prices were very reasonable and the service was faster than I expected. Thanks Troy, and I'll definitely recommend etrailer.com as a super place to get your trailer repair parts and accessories.

Charlie P.

12/27/2017

All the products are working well!



by:

Great part fit perfext and saved time

Thomas G.

10/1/2022

Everything in my order fit perfectly and got me on the road



by:

5 star. Parts worked great, no issues and shipping was promptly



by:

First step was the ordering, Talked to Steve and he was very well versed on what I needed. He gave me his direct line so after I got my bearing #’s and call back it took only minutes to finalize the order. I ordered on Wednesday and received everything on Friday. Wow, Great service. Doubled checked all the items and everything was perfect. Buying the assembly is the way to go. Very quick install. Great experience.



by:

I put these hubs on my trailer with new brake assemblies.
Next working day approximately 15 miles my right rear wheel and tire go spinning off into the woods and I'm leaving a trail of sparks.
All five lugs had snapped off,wheel was gone forever and I had to unload my Bobcat,go put on one of the old hubs and the spare.
So I will
Not be purchasing again.



by:

Fit and work perfectly for a year now. The new drum come with all the parts needed and with the new bearing races installed. By with confidence @ etrailer.com

Joe

6/7/2020

Brakes are working great no issues. ??



by:

I received the parts extremely fast and can't wait to install them tomorrow!



by:

Installed 4 of these on my 5th Wheel RV along with Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K
Item # AKEBRK-7-SA. Better than original.



by:

Excellent quality, Very well packaged with options for end cups.


25
124
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • etrailer Hub and Drum Assemblies For 7,000LB Axle With 1/2" Wheel Studs
    The Trailer Hub and Drum Assembly # AKHD-865-7-2-K is the same as the Assembly # AKHD-865-7-1-K you found but with 1/2" wheel studs versus the 9/16". We also have the Assembly # AKHD-865-7-2-EZ-K if you need the EZ Lube grease cap to access the grease zerk on your spindle.
    view full answer...
  • Max Torque Rating for 1/2" Studs on 7K Axle Hub and Drum Assembly
    For hubs that have 1/2" studs, like the Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles # AKHD-865-7-2-EZ-K you're looking at, you don't want to exceed 120 ft-lbs as that's the most torque this stud size can handle. Since you have 17-1/2" wheels I do recommend going all the way to 120 ft-lbs. If your wheels have a 9/16" stud (like most 17-1/2" wheels that fit with coned lug nuts do) I recommend going with the Hub and Drum Assembly # AKHD-865-7-1-EZ-K instead. This has the...
    view full answer...
  • Will the etrailer Hub part # AKHD-865-7-2-EZ-K Fit Behind a 16 inch Wheel
    Certain hub/drums are so large in diameter that they won't fit behind a smaller wheel. The part # AKHD-865-7-2-EZ-K that you referenced can fit with a 16 inch wheel that has a 8 on 6-1/2 inch bolt pattern though. I attached a review video for this hub for you to check out as well.
    view full answer...
  • How to Select Hub/Drum for 7K Lippert Axles on 2018 Grand Design Momentum 349M Toy Hauler
    Our range of trailer hub/drum assemblies for 7K axles is shown on the linked page. These all have the 8-on-6-1/2 bolt pattern. You can select a spare hub for your new 2018 Grand Design Momentum 349M 5th wheel toy hauler by confirming which set of bearing is used in your OEM hubs. The new hub has to use the same bearings in order to fit on your spindles. I checked the specs for the 349M on the Grand Design website but bearing information is not included. So you'll want to pull one hub to...
    view full answer...
    Image 1 for
  • Pilot Diameter of Easy Grease Trailer Hub and Drum AKHD-865-7-2-EZ-K
    The pilot diameter is 2.72 inches for the Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K. This hub and drum is for 5,200 lb, 6,000 lb, and 7,000 lb axles that have inner bearing 25580, outer bearing 14125A, and grease seal GS2250DL. It has an 8 on 6-1/2" bolt pattern as well, which is important because that's the bolt pattern your wheels will need to have in order to fit the # AKHD-865-7-2-EZ-K hub and drum.
    view full answer...
  • How to Determine Replacement Hub for M416 Military Trailer
    Due to the age of the trailer, we will want a little more information to make sure we get you the correct hub and drum assembly and brake assemblies. The best way to choose a replacement hub is by using the bearing and grease seal part numbers that are stamped into the metal cage of the bearing and the rubber of the seal. With these part numbers, I can cross reference the correct hub. We've had a few people ask for similar hub replacements for your M416 trailer and we've given them this...
    view full answer...
    Image 1 for
  • Concerns Regarding Zerk Fitting With EZ Lube Hubs Working Well For Fifth Wheels
    I certainly understand your concern regarding grease getting into the brakes or filling the inner hub. However, this rarely happens with any of our EZ lube Trailer Hub and Drum Assemblies like Item # AKHD-865-7-2-EZ-K. If it is the right size and you install everything correctly, you should not have any problems. The zerk fitting actually makes lubing bearings much safer and more effective. The key is not to overfill and to use the correct parts for your fifth wheel hub and drum assembly...
    view full answer...
  • How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
    The only difference between the Dexter 7K hubs and hub and drum assemblies that have either 1/2 inch studs or 9/16 inch studs are the studs themselves. Otherwise they are exactly the same. You can use calipers such as # PTW80157 to measure the diameter of the studs you have. Or you can check the hubs you have for any numbers stamped into them. If you see a 219-04 or 219-09 then it has 1/2 inch studs. If you see a 219-13 or 219-18 they are 1/2 inch. It is also possible that this information...
    view full answer...
  • What Spindle Does 7k Trailer Hub # AKHD-865-7-2-EZ-K Fit
    The spindle your hubs # AKHD-865-7-2-EZ-K and # AKHD-865-7-2-K are designed to fit are the number 42 spindle like the part # TRU37FR.
    view full answer...
  • Replacement Trailer Brakes, Hubs, Bearings and Seals for 2017 Grand Design Solitude 5th Wheel
    I was unable to identify your exact axle but I found Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K to work if you have EZ Lube axles. If you do not have EZ Lube axles use Trailer Hub and Drum Assembly # AKHD-865-7-2-K. Both of these kits will come with bearings races and seals installed and pre greased. You will want to confirm this is your exact kit by checking your bearing specifications. See link below for measuring them. If they don't match let me know what measurement you get and...
    view full answer...
  • Spare Trailer Hub that is Pre-Greased for Hub with Bearings 14125A and 25580
    We have the etrailer hub part # AKHD-865-7-2-EZ-K which matches the bearings, bolt pattern, and is pre-greased like you are wanting as well.
    view full answer...
  • Recommended Hub and Drum Assemblies and Brakes for 7,000 Pound Triple Axle Trailer
    To determine exactly which hubs you need you'll need to find your bearing numbers. Most likely you have # 25580 and # 14125A but verify to be sure. If these are correct you'll next want to find the diameter of your wheel studs and if you have E-Z Lube axles. If the studs are 9/16 inch use # AKHD-865-7-1-EZ-K for E-Z Lube axles and # AKHD-865-7-1-K for standard axles. For 1/2 inch studs instead use # AKHD-865-7-2-EZ-K for E-Z Lube or # AKHD-865-7-2-K for standard axles. Then you need...
    view full answer...
  • Replacement Brakes and Hub/Drums for 7K Trailer Axles on 2005 Forrest River Cardinal 33LX
    Yes, to replace the brakes and hub/drums on your 7K axles you need the following: - Self-Adjusting Trailer Brakes # TRU96FR - Hub and Drum Assembly # AKHD-865-7-2-EZ-K (1/2" studs) - Hub and Drum Assembly # AKHD-865-7-1-EZ-K (9/16" studs) The brakes fit either way, you just need to choose the correct hub drums that match your current studs so it fits with your current equipment just fine. I've attached some isntallation videos for you to check out.
    view full answer...
  • Replacement Brakes and Hubs/Drums for 2013 Redwood 36RE
    If the 2013 Redwood 36RE uses 7,000 lbs axles then you can use the Electric Trailer Brake Kit part # AKEBRK-7-SA for the braking assemblies and the Trailer Hub and Drum Assembly part # AKHD-865-7-2-EZ-K for the hubs/drums. These are our most cost effective options.
    view full answer...
  • Does Install Hardware and Drum Come with Trailer Brake Assembly Set # AKEBRK-7-SA
    The brake assembly set part # AKEBRK-7-SA is just the brake assemblies. If you need mounting hardware for this as well you'd need the part # BRKH12 as well. For hub/drums that match this capacity and application that come pregreased and with all the needed lugs, cover, bearing etc. you'd then want the part # AKHD-865-7-2-EZ-K which has an 8 on 6-1/2 inch bolt pattern. That would cover everything you could possibly need! I attached an install video for the hub for you to check out as well.
    view full answer...
  • Recommended EZ Lube Hubs For 7000 lb Capacity Axle 8 Bolts With 5/8 Inch Wheel Studs
    For a 5/8 inch stud option without the EZ Lube, I recommend the Dexter Axle Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 8-219-18UC3. This will have the grease cap and not the EZ Lube. However, you can add the EZ lube grease caps with plug that will fit, they are # RG04-120. If you want a complete kit, we don't have the 5/8 inch stud size, but for the 1/2 inch stud option, I recommend the Trailer Hub and Drum Assembly - 7,000-lb E-Z Lube Axles - 12" Diameter - 8 on 6-1/2...
    view full answer...
  • Will 8 On 8 Inch Hub Work With Timbren Axle-Less Suspension System
    Unfortunately, the Trailer Hub Item # AH60880FCOMP will not fit the spindles of the Timbren Axle-less Suspension System, Item # TASR7KS02. Like you pointed out, this is the only 8 on 8 inch hub option we have for you. We do have other hub options that would fit the Timbren Axle-less Suspension System, Item # TASR7KS02, like Trailer Hub and Drum Assembly, Item # AKHD-865-7-2-EZ-K, but they are 8 on 6-1/2. Please let me know if I can help you with any other questions.
    view full answer...
  • How To Grease AKHD-865-7-2-EZ-K Hubs
    There is not an exact amount of grease per each hub for part # AKHD-865-7-2-EZ-K but I recommend LubriMatic LMX Industrial Strength Grease part # L11390 which will be more than enough. First pack the bearings, like you already did. Spread a small amount of grease on the spindle. Insert your bearings and grease seal in the hub and mount the hub on the spindle. You just want to pump grease slowly into the spindle with a grease gun like part # L30200 until you see grease seeping through...
    view full answer...
  • Replacement EZ-Lube Grease Cap and Rubber Plug
    It sounds like you need an EZ-Lube type grease cap and rubber plug for your trailer hub. We have these EZ-Lube grease caps in several sizes to fit a range of hubs. All are shown on the linked page. All you need to do is measure your hub's inside bore diameter to choose the correct matching grease cap. Part # RG04-040 fits a hub bore of 1.99-inches. Part # RG04-080 fits a hub bore of 2.44-inches. Part # RG04-120 fits a hub bore of 2.72-inches. This is the size that fits the hub you...
    view full answer...
  • Recommended Trailer Hub and Drum Assembly for 7,000 Pound Axle
    In order to find compatible hub and drums for the 7,000 pound axle on your trailer, you will need to locate the bearing numbers in your existing hub. The numbers should be stamped onto the bearings themselves, or if they cannot be located, you can also take measurements of your spindle at various locations. You will want to use a digital caliper like # PTW80157 to get the most accurate measurement possible. I have attached an image that shows you the measurements that should be taken. For...
    view full answer...
    Image 1 for
  • Locating Replacement Trailer Hubs and Drums for Mobile Home Axle
    In order to see if there is an 8 or 6 lug replacement hub and drum assembly that will fit the axle on your trailer, you will want to first pull the existing hub. Once the hub is pulled, check for the bearing numbers that should be stamped onto the bearings themselves. If you cannot locate these numbers, you can also measure the spindle at various locations where the bearings sit. I have attached an image that shows where these measurements should be taken. I recommend using a digital caliper...
    view full answer...
    Image 1 for
  • Recommendation Of 7000-lbs Axles To Replace 5200-lbs Axles On Fifth Wheel
    Unfortunately the standard axles in our selection available have a maximum capacity of 3500-lbs. I do have a Timbren Axle-Less Trailer Suspension Item # TASR7KS01 option which would also replace your suspension. Timbren systems provide smooth, quiet, and safe rides without the need of an axle. Timbren systems also give you an independent suspension for better handling. It also has a 7000-lbs weight capacity. You would also need new trailer hub-and-drum assembly like Item # AKHD-865-7-2-EZ-K....
    view full answer...
  • Will etrailer.com Hub and Drum Assembly AKHD-865-7-2-EZ-K Fit 5,200 lb Axle
    The Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K does have the same bearings and seal that you would find for one that fits a 5,200 axle so it should work. Even though this is the case it is always best to double check before purchasing. Pull your hub and verify that you have a # 25580 inner bearing, # 14125A outer bearing, and grease seal like part # GS-2250DL with an inner diameter (ID) of 2.25". If this is the case then you are good to go! If you can find parts numbers then simply...
    view full answer...
    Image 1 for
  • Parts Needed To Update 3" Axles From Donut Wheels To More Common Trailer Wheels and Tires
    I recommend replacing your spindles with the #42 E-Z Lube Spindle # TRU37FR. This will allow you to have the more common size hub in the event you ever have a breakdown. It also gives you the ability to easily fill your hubs with grease as it has a grease zerk. For the hubs, first you will need to check with local laws that you are able to run brakes on only one of your axles. Many laws now require trailers with braking axles to have brakes on all hubs. We have the Idler Hub # AKIHUB-865-7-2-EZ-K...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Used Items Available
Used Picture for Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased

Condition: Missing Parts

Notes: Missing everything but the nuts otherwise fine.

Our Price: $97.02
Add to Cart
Secure Checkout

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924