Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (162 Customer Reviews)
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.I received the wheels, Spindles and bearings. I did not receive the Hubs. I received Tandem-Axle Hangers Item H248 instead. I've attached a photo of what I received. Please advise next steps to get the two hubs, Items AKIHUB-440-2-G-1K TRAILER IDLER HUB ASSEMBLY 2000 LB AXLES- 4 ON 4 GALVANIZED. Shipping was great and the parts I did receive look to be very good quality. Thank you
Overall quality is excellent. Solid galvanized finish. Complete with bearings, races installed, lugnuts, and seals.
The service was great. I could have used a little more guidance to make sure that I ordered the correct hub. I had to purchase a different set of bearings as the ones that were shipped wouldn't fit over the axle shaft.
So far so good. Had to modify for a wood splitter. A much better upgrade than what it came with. Will be updating the other side.
Product is great but you need to use another form of shipping. USPS never delivers on time and sometimes, like in my case. I needed the hub by a specific time which e-trailer said I’d get it by but the shipping was delayed by usps. Please consider using a different method of shipping that is more reliable.
Wrong bearings were sent Initially???? Correct bearings were eventually sent to complete the project.
Both products and shipping were excellent. The wheels and hubs were nice quality and easy to install on a custom built utility trailer. The packaging was very neat. The delivery was super quick.
Great replacement for Hobie Kayak trailer used in saltwater... hubs look like they will hold up better being galvanized. Great bearing and seal replacement.... great fit.
Shipping was very fast and parts were spot on.
Parts fit perfect. I just wish the kit included a cotter pin.
The old hubs were frozen in place and the grease inside was completely dried, including the bearings. I opted to replace entire hub as I new I would damage something trying to get the old races out of the old hubs. Clean up the spindles and proceed with the install. It was fast and easy.
Still working well!
I should have known but I didn't read reviews. No Cotter pin! That is such an easy thing to add but they don't. It requires a trip to the store making this a pain in the rear. Would be a cool bonus to add a new nut as well. I think the instructions are not very in depth either but still a good product.
I thought the hubs and bearings looked good and the install went OK. Took the boat out for one fishing trip and get back home to see both sides are trashed. The left side completely pushed my bearing buddy out and looks like it may have been riding on the axle spindle. I don't know if the outer races weren't completely seated in the hub when they were shipped or if the bearings are absolute junk. If they are going to ship the hubs with the races pre-installed they should be seated properly if you ask me.
Working as they should
Good fit and holds up. Haven’t hauled over 500 lbs
Just as described. Nicely packaged. Quality parts at a great price. It would be nice if a cotter pin was included. Because if your not a mechanic like me and have some. You are going to have to make a trip to the parts store to complete your project. Other than that I highly recommend getting your parts here. I used these hub to convert a log splitter to a hub and wheel assembly instead of the one piece. Worked perfectly.
Good hub, good price. Purchased for a vintage Alloy brand boat trailer. Perfect replacement . Matches the hub on the other side which I purchased from Etrailer some years ago. Nice to have this stability in the products offered. The only addition I made was to also order a double lipped grease seal at the time of purchase, since this is a boat trailer application.
Norman C.
4/30/2021
After a year of service, hub is working fine. The double lipped grease seals I added are also doing their job. No complaints!
Parts arrived as shown and were easily installed. They were used on my boat trailer so the galvanized hubs were a perfect fit. Etrailer is easy to work with and communicates the progress of your order via email.
Great fit, great customer service.
Perfect fut!!! Got our bow fishing boast ready to hit the water!!
Had a strange hub that used lug studs and one of the threads stripped. This item was cheap, shipped quick, and put my utility trailer back in service. No complaints, would buy again.
I thought this came pre assembled but it did not
Great price. However, after tightening the bearings down so the wheel moves freely, there seems to be a little bit of a grinding noise. If I loosen it too much, then there's some wobble in the hub. Will know the next time I take the boat out. If I hear any grinding and if the hub gets warm, we'll have to contact customer service. For the price, if I get 2 years out of the bearings I'd be happy. I would have preferred a better bearings that were smooth, maybe higher quality like a timken.
Seems in this day and age something always comes up. Not with thease hubs and bearings. Everything was as described and fit like a glove. I'm really looking forward to getting my boat out now.
As always e.trailer delivered quickly and everything was well packaged. I've been using e.trailer a lot recently and they are on top of their game.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/8/2024
My goodness, that was definitely a mistake on our part. Customer Service will be touch so that we can have the hubs shipped out for you.