Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (24 Customer Reviews)
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.
Perfect fit and working great so far. Used on a lightweight kayak trailer. Easy to install and solid quality.
E-Trailer is the best source I have found for customer support and parts selection
I called customer service not really knowing what parts I needed. Brandon looked them up and helped me order what I needed. The parts arrived quickly and were just what I needed. Excellent customer service. E trailer will have my business when I need something again. Thanks
Worked as advertised all parts in good condition, Only complaint initial visit to web site sent me on a goose chase finding for 1 1/16" shaft in lieu of 1" info on website could have said also available for would have saved me a bunch of time researching
Great product, just had small problem putting grease cap on.(Had to sand the edge of the cap)
Jeff
7/6/2023
Great!
Unfortunately the overall hub length is about 1/4” too short. So I will need to have a spacer made for the spindle. Also, the spindle base OD is 1.25” and the grease seals are 1.5” ID, so they are too large. Otherwise the product is fine and I will use it.
Easy install. Great videos on the site to assist in project. This company really made feel like they care about helping you.
Received everything I ordered. Everything fit perfectly. Thank you
Excellent service . Good quality parts . Will definitely recommend them and I’ll be using again
The person in customer service knew exactly what I needed. The hub is a perfect match for the ones currently in use on my trailer. I carry this one as a spare, and see no reason to doubt that it will work perfectly when needed. Ordering was a breeze and I had it in no time. Thanks for great service!
I couldn't get threw on the phone so took a shot. Correct hub and bearings for a small Venture jet ski trailer 1991 but seals were not. Just got them at a parts shop local. Says they are for a 2000lb axle but this is a 1000lb trailer.
perfect fit, remember the rear seal goes flush with the hub any further and it will bind the rear bearing. the front does not have a seal just a washer and castle nut.
Well worth the money.
great product
Perfect, everything fit!
Preston G.
6/28/2024
Still working!
Great customer service
Not bad
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ian
12/12/2024
Still working fine after about a year. Have not needed to do any maintenance other than routine inspections and add grease occasionally. Have been using bearing buddies and avoiding submerging bearings in saltwater, although I do not think this would have been a problem.