Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-2-G-EZ-1K

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and nuts included.

Features:

• Marine-grade trailer hub assembly fits idler axles
  • Bearings, races, seal, grease cap, and lug nuts are included
• Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
  • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
• Sturdy iron construction
• Galvanized finish offers excellent corrosion resistance
  • Ideal for use on a boat or snowmobile trailer
• QAI and CSA certified

Specs:

• Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BT8 spindles
  • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
• Wheel size: 10" to 12"
• Bolt pattern: 5 on 4-1/2"
• Wheel stud dimensions: 1/2" diameter x 1-5/16" long
• Grease cap flange diameter: 1.99"
• Weight capacity: 1,000 lbs
• Limited 1-year warranty

Bearing, Race, and Seal Information

• Bearings (included)
  • Inner bearing: L44643 (1" inner diameter)
  • Outer bearing: L44643 (1" inner diameter)
• Races (included)
  • Inner race: L44610
  • Outer race: L44610
• Grease seal (included): 34823
  • Inner diameter: 1.249"
  • Outer diameter: 1.983"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

H-150-97 AxleTek Trailer Idler Hub Assembly for 2K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube