Hub is designed for use on trailer idler axles. Fits 3.5K E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle or etrailer Easy Grease to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (73 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3.5K E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Finished one side, gotta get a cotter pin for this side. Kinda wish they came with cotter pins. Good product, I’ve used these hubs before on a different trailer and so far so good. Convenient that it’s greased already and assembled. Makes installation a breeze. Easy 5 minute job. Thanks etrailer!
new hubs and bearings worked fine on our boat trailer, excellent service and delivery
Next time I’m buying OEM. The bearings aren’t really ps packed with grease, the hub is just stuffed with grease. You can’t get to the back bearings to inspect or grease, so these hubs will only be good for a few years. The kit didn’t come with the easy lube, spindle nut, washers, or locking clip. I had to reuse my old hardware. This is the price difference between this item and the dexter one I should have bought.
This is a good product for the price, but you’ll get what you pay for.
I needed a new hub assembly for my boat trailer, but had no idea which one to get. I called E-trailer's customer support and the agent told me what to measure etc. I called them back with the requested info and they told me which assembly I needed, to include the two different sized bearings. The hub assembly fit perfectly. I was very pleased. It is of great quality and came with bearings, racers, lug nuts, grease seal and hub cover for zerk fittings. I was astonished with the low price for the entire kit. Their customer service is great, shipping is fast, and the products are top notch quality. I will use E-trailer for all my future trailer needs. They stand by their products.
Last project built. Used etrailer for almost all parts, 7 pin wiring harnesses, junction block, tail lights, jacks vent cover and so. Love the leveling jacks. Friend wants one now so started another one. I will be getting all the parts from etrailer...
replaced the enter hub assembly, bearings, seal, and even grease zerk. lost everything when wheel came off my boat trailer. almost everything came in the hub kit for a complete rebuild except the zerk and grease, which i did also order from etrailer.com. the replacement went perfectly. all the parts were as good if not better quality than the original on the trailer. glad i did both sides cause if one goes, the other is not far behind. there videos are also very helpful.
I have used etrailer several times and I am very satisfied with part quality and price. Very courteous and helpful. Don't get cheap knockoffs. Orders to you in 2 to 3 days. Keep it up you have my business. Tks William
Nice product
Easy, fast install and a great price.
Easy fix. Good stuff. Might order a spare in case of an unexpected roadside repair
Product was as described by Katie in customer service. Went together very easily!
I was upgrading my 2000 pound axle to a 3500 pound axle so we could haul a full cord of wood safely in my 6*10 trailer! I bought new everything and had it installed in about 3 hours.
Fits perfectly. Well built. Buying the complete hub with bearings and grease seal saved me a lot of work vs replacing parts in the old hub. Just add a bearing buddy and you're good to go.
Limited use on trailer. Matched up with rim and hub.
Arrived earlier than promised. All bearings, races and seals were perfect. Had the races installed, bearings packed, seal installed and hub replaced in an hour.
Customer Service a GREAT help to get the right parts. I will use eTrailer again.
Great product, easy to install, arrived in 1 day! I have a couple trailers, will buy from this company again for sure!
Great company to order your trailer parts. Any questions contact them and they'll help!
Etrailers .com's customer service is the best I have ever seen. They go the extra mile to satisfy their customers and I will continue to use them for all of my trailer needs. The hubs arrived promptly as described and easy to install after reviewing the "How To" documentation that they linked to my receipt.
Great item for price fit was great also and fast shipping thanks
just what I ordered very fast ship. need to place another order very soon. great doing business with you . thanks
Fit up was perfect everything was pre greased as listed in the details. Only reason I gave 4 stars is because the ez lube caps that come with the kit would not fit in the hub. Also one box had been opened and didn’t have the ez lube cap. I reused the oem caps and everything is perfect. Will definitely buy again in the future!
Customer service was very helpful when our package shipment was delayed, however it arrived in a box which was barely holding the contents. I recommend spending a little more time making sure your heavy products packaged in an appropriate box
fit perfect appears to be a great product i really like every thing i needed was in box thank you
I didn’t see anywhere in the ad where it said these spindles and bearings were made in China. Had I known I would have not ordered them.
Hubs having the bearing races, bearings and pre-greased save a lot of time. I ordered 4 pre-lubed Hubs. all were in great condition.
If you don't have to have it yesterday and you need parts and/or help with a trailer project..... why would you go any where else...? They are the whole package.... very knowledgeable and thorough with my order.... from start to finish! Thanks
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.