bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized

Item # AKIHUB-545-35-G-EZ-K
Our Price: $61.13
Trailer Hubs and Drums
Shipping Weight: 8 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized part number AKIHUB-545-35-G-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (270)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-G-EZ-K

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Easy Grease
  • EZ Lube
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.


Features:

  • Marine-grade trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Galvanized finish offers excellent corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-545-97 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube

Compare to Dexter 8-248-50UC1-EZ





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-35-G-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (270 Customer Reviews)

Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.

by:

I placed my order for hubs and bearing w Bay in customer service as I had a couple questions which she answered well. The package was shipped quickly. It arrived with one problem. I called Customer service and spoke with Kate who was very helpful and provided a solution and to replace a item. I was called later by Patrick the shipping lead who assured me the replacement was shipped and apologized for the error. Always excellent service at Etrailer. The only place i will shop for trailer parts.



by:

I ordered on a Sunday to replace old 5x4.75 (uncommon size) hubs after discovering the new wheels and tires I ordered were 5x4.5 (common size) no I did not measure my old wheels. My old bearings were superseded by these bearings included in this kit. Assembly was a breeze. These were marked as shipped on SUNDAY! Thanks, you have my business.



by:

I've had the hubs on for one year of use and they have performed perfectly. The price was good and delivery was timely. I'm very satisfied.



by:

The hub assemblies I bought worked fine for my trailer, thank you Martha O. I was a little disappointed that I didn't get American made products but overall the Chinese parts fit fine. The packing left a little to be desired, one dust cap was dented and I had to do some filing on it before I could hammer it in to place. One roller bearing casing was also dented a small amount but the bearing was still smooth so I went ahead with it. The parts did travel from Missouri to California and the box was pretty beat up. Maybe etrailer could double bag the parts? The box did get here in just a few days so they shipping was good. I would buy these parts again if I ever needed to.



by:

The , order window for this product did not show the bearing sizes, and they shipped me the hub with wrong bearings, so I had to return it. Looking over the item description a 2nd time, It was difficult to locate the bearing sizes. That feature should be very visible for customers to find, so that they don't order the wrong size bearings.



by:

Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD

Lynes D.

9/20/2018

1 year - 35k miles Im still very happy with the set of idler and brake hubs, bearings are still rolling smooth. I only use 1 type of grease Lucas RedNTacky2, about every 1k miles pull the rubber plug, 1/2 pump of grease not too much or youll blow the seal! Most common problem people have! Ill be buying another set for the trailer Im building. Keep making people happy, Thankx LSD



by:

No castle nuts or washers with this

Etrailer Expert

Jenny N.

5/31/2023

Hey, I wanted to let you know that the hub assemblies do not come with the castle nuts and washers. We do have them available on the site. The D ring washer is part # 5-23, the cotter pin is part # 165649 and the castle nut is part # 165686.



by:

Great product, arrived a day earlier than expected with the free shipping option. Will buy again from etrailer when it’s time to do it again.



by:

I have always had good service with etrailer but this time it appeared my order was going to be two weeks out on delivery which would of hampered my vacation. I contacted Gwen at etrailer asking if she could look into the delayed shipment, she was very professional and extremely nice stating she would look into the product shipping early but there was no promises. I received my order two days later, hats off to Gwen for saving my vacation



by:

Parts fit well and assembled easy, price was very fair. This is the 3rd time I've bought products from etrailer and have been pleased every time.
Thanks

Donald

4/22/2021

Good



by:

Received what I needed when I needed it. Very competitive price.



by:

Absolutely excellent service and parts



by:

Everything went together very easily



by:

Love all the products I have purchased from E traile BUT until E trailer starts shipping with fed X or a faster delivery company other than the United States Postal Service, which is very slow. It cost me a weekend of no boating and almost missed out on Fourth of July boating.



by:

Have not mounted on trailer yet, but test fitted. Exact fit part for 3500 lbs Road King boat trailer. All parts included as described on etrailer's website. One of the benefits from ordering with etrailer are the "how to" videos and their "ask an expert" forum.

Steven S.

4/27/2022

No issues



by:

Thank you for your assistance with my purchase of new hubs for my boat trailer. They are exactly as described and they fit perfectly on my trailer. I am attaching a few photo's of the hubs installed. I would recommend your company to everyone who needs hubs........EXCELLENT SERVICE.



by:

Great price and service, could package a little better. Couple dings on the studs.



by:

Bought 2 of these as an emergency fix if needed. Product was as described and appears to be of good quality. Came with every piece pictured and was shipped quickly. Only time will tell and hopefully I won't have to use them.



by:

Good quality part !!



by:

Was a bit worried about ordering online and the proper fit but everything worked out great. Parts installed without any issues. The folks at etrailer were helpful in getting the right part quickly.



by:

I like doing bussiness with your company. All services are excellent. Thank you.



by:

Ordered the hub and recipe it very quickly. They provided a video for reference on installation. It was very well made and easy to install. Very pleased with it, but the best part was the customer service. The old hub and bearings were so destroyed that I couldn’t get any numbers off of it. The lady from etrailer stayed on the phone and helped me research it until we found the right hub and bearings!!! In the end it was exactly what I needed and as happy as I am with the product, I’m more happy about the friendly and knowledgeable customer service they provided!!! Highly recommend the company and the products they sell!!!!



by:

Would have given 5 stars but... product damaged due to inadequate packing the bubble wrap bag is not enough to protect the somewhat fragile grease covers from the weight of the two hubs. and one arrived too damaged for me to use. Also the product a bit more expensive than what can be found for an apparently similar product from other sites.But I went with etrailer because I have had great past experiences.

Etrailer Expert

Sierra K.

9/27/2021

Sorry to hear about the damage. Customer Service will be reaching out to you. We also have a lowest price pledge that you can read through and possibly get a better deal:



by:

Excellent product at a very realistic price point. Perfect replacement part. THank you.



by:

Item worked great
Good service as we
ll


25
270
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • How To Find Correct Replacement Idler Hubs for Legend Tandem Axle Trailer
    We currently offer trailer idler hubs with a 5 on 4-1/2" bolt pattern for the following size axles; 2,000 lb, 2,200 lb, 2,500 lb, 2,700 lb, and 3,500 lb. In order to find out which is correct for you, you'll need to know your axle capacity which is printed on a white tag in the center of the beam most times. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-35-EZ-K for example is for a 3,500 ln axle and our most popular option. I have attached our full list of options below as...
    view full answer...
  • Replacement Idler Hub Recommendation for a 2017 Dutchmen Coleman Lantern LT Travel Trailer
    The correct replacement idler hub for the 3.5K axle on your 2017 Dutchmen Coleman Lantern LT Travel Trailer is the following: - Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K This hub comes pre-greased with the bearings and grease seal installed as well as a grease cap for both standard and EZ Lube spindles so you'll be set and ready to go!
    view full answer...
  • Replacement Idler Hub for Hub Stamped With TMW 46210 1209
    It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub # AKIHUB-545-35-G-K for standard spindles or the Easy Grease Hub # AKIHUB-545-35-G-EZ-K if your spindle has a grease zerk on the end of the spindle. The 1209 may be a date code or batch type number the manufacturer used to identify and changes in materials or processing.
    view full answer...
  • Correct Replacement for TDE 46210 Trailer Hub
    There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500 lb axle so you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for galvanized or part # AKIHUB-545-35-K for standard.
    view full answer...
  • What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?
    Thanks so much for providing those details! Based on your bearing numbers, you definitely have a 3.5k axle with a 5 on 4-1/2 lug pattern. For replacement hubs, I recommend the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have standard spindles). Both...
    view full answer...
  • Recommended Galvanized Trailer Idler Hub for Trailer with 3,500 Lb Axle
    Yes, we do have exactly what you're looking for in the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-G-K for standard or part # AKIHUB-545-35-G-EZ-K for easy grease which both have a galvanized finish. Furthermore, the kit comes with new wheel nuts as well so you'll have pretty much a new setup.
    view full answer...
  • Replacement Hub for OnSpec Boat Trailer with 3,500 lb Axle
    Since your OnSpec Boat Trailer has a 3,500 lb axle the correct idler hub would be the part # AKIHUB-545-35-G-EZ-K that you referenced. Which comes with a dust cap that has a removable center plug for zerk fitting access, new bearings, lug nuts, and a seal. For a cotter pin you'd then need the part # 165649.
    view full answer...
  • Do the etrailer Hub Assemblies for 3,500 lb. Axles Work With Slip on Rotors
    The studs on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K are 1-5/16" in length. This is generally a good length for this application. So as long as the slip on rotors you are using require a stud length shorter than that you will be in good shape.
    view full answer...
  • Correct Replacement Idler Hub for Reliable SureLube 4,700 Lb Axle
    The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part # AKIHUB-545-35-G-EZ-K should work great on the Reliable SureLube 4,700 Lb Axle as the bearings are an exact match. The hub has a 5 on 4-1/2" lug pattern which is the most common and standard application so it should work well for you.
    view full answer...
  • How to Determine Fitment of the Trailer Idler Hub Assembly Part # AKIHUB-545-35-G-EZ-K
    In order to determine fitment of the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K you will need to know both your lug pattern and bearing numbers. This hub has a 5 on 4-1/2" lug pattern. I have attached a help article to help you determine if this pattern will work for you. This hub also uses a L68149 (1.378" inner diameter) inner bearing and a L44649 (1.063" inner diameter) outer bearing. You will need to disassemble your existing hubs or measure the inner and outer bearing...
    view full answer...
  • Picking Out Replacement Hub for Nitro Boat Trailer
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information as we don't have a way to pull up what your trailer would have. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you...
    view full answer...
  • Boat Trailer Hub for my Trailmaster Boat Trailer.
    We can get you what you need unfortunately you will need to take some of the measurements to make sure you get the correct bearings and seals for your trailer. Trailer manufacturers use many different sizes when they build their systems and without precise measurements, we could not be 100 percent sure. Digital calipers are available at most tool supply stores. I have attached a drawing that shows where you can take the measurements. We would need to know the inner diameters of the inner...
    view full answer...
  • Finding Correct Hubs For A Dual Axle Enclosed 8x16 Trailer With 3,500 lb Axles
    Hello again Patrick thanks for the pictures. Everything I can see indicates we are on the right track with the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized Item # AKIHUB-545-35-G-EZ-K being the correct hub. From the first picture we know it is indeed a 3,500 lb axle and it was made in 2010 (which is also a good sign). We also know that the grease cap flange diameter on the current hub is the same as that of the # AKIHUB-545-35-G-EZ-K hub at 1.99". Since...
    view full answer...
  • What Spindle Dimensions Does Trailer Hub AKIHUB-545-35-G-EZ-K Fit
    Your spindle dimensions match very closely to what we have hubs for but the inner bearing dimension would need to be 1.380 and not 1.480 inches. The outer bearing dimension needs to be 1.06 and the seal dimension 1.73 inch. If that is the case for your spindle the hub part # AKIHUB-545-35-G-EZ-K that you referenced would be a confirmed fit.
    view full answer...
  • Are Easy Grease Style Trailer Spindles Actually Better
    The spindle of your axle would need to have the grease fittings which can't simply be added on. You'd have to replace the entire spindle. Before you do that it's worth mentioning that we see more problems for people with those types of spindles than what you have now as they make it almost too easy to add grease to the hubs which then blows out the seal while on the highway. Packing grease by hand is the way to go and gives best results. I attached a video this page that details best way...
    view full answer...
  • Replacement Hub For UFP H-1377 on EZ Loader Boat Trailer
    Hey Colby, thanks for the question, and we can get you the right replacement for the UFP H-1377 hub on your EZ Loader boat trailer. The right replacement for you is the following: - Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K This is a galvanized hub so it's perfect for a boat trailer and is the right fit for your spindle so you're all set.
    view full answer...
  • Box Dimensions for Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
    The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K will ship in a box that measures 11" x 11" x 6". That makes each box a little less than 1/2 of a cubic foot which means you should be able to comfortably fit 8 boxes in 4 cubic feet of space. Attached is an installation video for you to check out!
    view full answer...
  • Are the Races Pre-Installed On the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
    Yes, the races are pre-installed in the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K. You'll simply lube up the bearings and install them along with the grease seal.
    view full answer...
  • How to Pick Out Hub/Drums for 2015 22 foot Coachman APEX 215 RBK-1SL
    In order to pick out the correct hub/drum assembly for a trailer like your 2015 Coachman APEX 215 you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner...
    view full answer...
    Image 1 for
  • How to Determine What the Correct Replacement Hub Is
    I would not be able to tell you what replacement you need based on the information you gave but there is a way for you to find out what replacement hub will work for you. In order to find the correct replacement hubs for your trailer, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped...
    view full answer...
    Image 1 for Image 2 for
  • What Stub Axle Matches Up with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
    The Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part # AKIHUB-545-35-G-EZ-K is designed for 3,500 lb axles. This could mean either leaf spring or torsion axles. It sounds like you might have a torsion axle and are looking for a replacement spindle. Unfortunately, this is no something we can help with and I suggest reaching out to the axle manufacturer. If you have a leaf spring axle and are looking for a replacement spindle, you can browse through the selection below based on...
    view full answer...
  • How to Choose the Correct Replacement Hub
    To ensure that you get a hub that fits your spindle correctly you will want to use a digital caliper and measure points B, C, and D (see attached picture) of your spindle to the 3rd decimal place, for example 1.750. These measurements will help us to determine what bearings sizes and grease seal that the replacement hub needs for it to be compatible with your spindle. From your description I can tell that you have a 5 on 4-1/2" bolt pattern on your hub, but I am not quite sure which bearings...
    view full answer...
    Image 1 for
  • Finding Replacement Hubs for 2003 Four Winds Trailer
    I can definitely help and point you in the right direction! I do not have a way to look up a serial number to tell me specifics on what kind of hubs you would need. In this case we would need to gather a bit more information in order to narrow down the correct hubs. Specifically I would need to know the weight capacity of each axle, and whether the axles have brakes or not. More importantly I would want to find out both the inner and outer bearing sizes. This would tell us exactly what...
    view full answer...
  • Diameter and Thread Pitch of Wheel Stud on AxleTek AKIHUB-545-35-G-EZ-K Trailer Idler Hub
    The AxleTek # AKIHUB-545-35-G-EZ-K hub you'd looked at uses 1/2 inch-20 wheel studs. 1/2 inch diameter, 20 threads per inch. The lug nuts are included with the hub, as are the bearings, races, grease seal and the EZ Lube grease cap. We don't carry TDE parts, but from my research, I've found that the # AKIHUB-545-35-G-EZ-K is a direct replacement for their 46210 hub. If you click the provided links, you can see an install and a product description video.
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Video Edited:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.