Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (210 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.I ordered the Idler hub (pre-greased) for the 3500 lb axle I have just installed it and it fit perfect
Finally got them in today (Postal Service delayed them in Memphis) and they are just as I ordered. Changed them out with the old hubs with no problem except the dust cover was just barely too big for my axle. No problem I just used by old dust covers.
was an interesting job. had to buy a bearing puller to get of the old race then this went on and has been fine now for a year now. I bought both sides but only did the wobbly wheel as I don't like to fix what isn't broken yet.
Parts came earlier than expected and was a super easy 15 minute installation.
Prefect fit!
Todd
7/26/2024
Put these on my boat trailer last year. Very solid and smooth.
I’m very upset. I have ordered a lot of stuff from you, but this order really was bad. First off. It’s missing two Lugnuts. They gave me two that were too big as well. Also, dust covers do not fit. The solid ones do at least I think the ones with the rubber metal do not fit. I know they are hard to get in, and I am very experienced with putting them in and I could not get them to go in. Hopefully I haven’t tried them but the solid dust covers will work. If not, I will have to buy some bearing buddies. I don’t know if I will be using you again cheap Chinese stuff you’re selling
Jenny N.
8/30/2023
I am sorry that it came with missing hardware and that the grease caps are tough to tap into place. I will have our Customer Service team reach out to you.
Ordering was easy. I had some questions so I called. Tammie was very helpful and took my order. Hubs arrived in 2 days. Installed easily and works perfectly. etrailer is a great company to do business with.
I put the new hub assembly on for my Lil' Hobo retro camper trailer. The hub assembly doesn't come with a washer and nut for the spindle, so you need to save your old ones or buy these separate if you don't have them. I put it on with new tires and wheels, upgrading from a four bolt to five bolt pattern.
Hubs were as described. Slipped them right on, adjusted and no problems.
Converted my trailer to 5x4.5 so I could use standard rims. Everything worked great. I ordered 2 drums and 2 hubs. Everything included.
Fast delivery
...the hub and bearing set should include cotter pin had to replace them and for an additional couple of cent it far to Loews.
Thanks anyway
Just a quick note to say thank you to eTrailer for not only the quality of parts received but also to Melissa for the dedicated service and attention that was given to me when placing my order.
THANK YOU MELISSA for all of your help!
Looking forward to my next purchase!
Not much to see, but here are pics of the installed new hub and Bearing Buddy.
My trailer originally had 5/ 4.75 hubs but decided to change to 5/4.5 hubs since my other trailer has the 5/4.5 hubs. Very happy with my purchase.
Etrailer tech (George J) was great helping me pick this out for my trailer
They look good, will be installing and finishing a total light job, complete switch to electric brakes, safety trigger, battery by the end of next week. Thank-you etrailer!
Everything has worked as should
Good price, right fit for my trailer per my research on your website. Short wait time on delivery. If product lasts, very pleased with overall experience with your company. Thank you.
The right parts at the right price !
Parts fit and worked as like they should. Fast shipping.
Product works great and was easy to install. I don't think it came with the castle nut pin, which might be problematic for some people who don't have hardware collections at their work space. It might help those who are unfamiliar with hub installation to get an install guide with the product. I could see someone over tightening the castle nut and ruining their new bearings.
Ian K.
11/14/2017
Great! I checked them after about 250 miles of use and they were still tight and in great shape. They were exactly as described and perfect for my application.
Got pre packed hubs for boat trailer they fit perfect just as described!! Fast shipping. Would recommend A plus
I used etrailer.com for the supplier for my utility trailer needs. I received everything I needed for a very fair price.
Ken J.
8/13/2018
The hub/bearing assemblies I received for my utility trailer are still working great! Very good price as well.
Perfect fit. I can always count on Etrailer for all my trailer needs
Replaced hubs on 40 year old boat trailer. Cleaned up spindles with 350 grit sandpaper, packed bearings, filled remainder of wheel cavity with grease, assembled with new seal and old washer and hub nut. Good as new. I would have given them 5 stars if new washer and hub nut were included. I did learn that a dust cap driver can easily be made by cutting off a short piece of 2 inch sch. 40 pvc pipe. New lug nuts and dust cap were included.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank
3/11/2024
Have had no problems each trip is about 200miles and I have made numerous trips