Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
(36 reviews)
Price: $37.42
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
Item # AKIHUB-5475-35-K
Our Price: $37.42
Orders above $99 qualify for Free Shipping
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (36)
- Q & A (0)
- Photos
- Why etrailer?
etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-5475-35-K
- 5 on 4-3/4 Inch
- For 3500 lbs Axles
- Hub
- Pre-Greased
- Standard
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, seal, grease cap, and lug nuts are included
- Sturdy iron construction
- Zinc-enriched paint finish
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- QAI and CSA certified
Specs:
- Application: 3,500-lb trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 4-3/4"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Grease cap flange diameter: 1.988"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KH-5475-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-3/4 - Pre Greased
Compare to Dexter 845475UC1
Customer Reviews
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased - AKIHUB-5475-35-K
Average Customer Rating: 4.9 out of 5 stars (36 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: DezJuan Jackson05/06/2022
Very good product went on the trailer just as it should!
by: Tommy05/22/2022
Good products excellent pricing and quick delivery. Have places 2 separate orders with them The first order was over $100 And shipping was free. The second delivery two hubs was under $100 but shipping was only $15.
by: Rich03/12/2022
Quality products for less. Fast shipping. Expert customer service. I recommend etrailer to anyone looking to refurbish their equipment!
by: charles s12/11/2016
my bearing went out on my trailer and ruined my hub . I have an older trailer I got a great deal on. my hub is a 5 on 4 3/4 which is hard to find in stores. but they could order it. for a price to high would take to long. and the guy I talked to just didn't. seem enthused to do it. he never did call me back. but through my own research i found trailer and I am completely satisfied. great product and easy to install. and the price awesome. cheaper than anyone. you will be getting my business from now on. In including some pics.
by: Jeff J09/08/2016
I recently ordered two idler hubs a rim and tire to repair an older trailer I'm trying to make road worthy again. The hubs were for a #3500 Lb Dexter axle. I went with the cheaper hubs and while they are most likely imported the hubs were machined well and fit with no issues. the E-Trailer website was easy to use and really helpful when I was trying to determine what type of bolt pattern I had.
Thanks!
Comments
I havent used the trailer much, but I havent had any issues with any of the products I purchased.
Jeff J - 10/26/2017by: Russell02/17/2022
So far I haven't had good weather to be able to put my parts on yet but as soon as I'm able I will write another review
by: Ronnie03/03/2022
Competitive pricing, quality item, fast shipping, Thanks WooooooooooHoooooooo!
by: Matt04/30/2022
Fast service
by: Richard 12/08/2021
Great no problems well built
by: Brian 10/19/2021
It fit as it should and works great.
by: Pat A.04/11/2019
The hub assembly I purchased from etrailer was a perfect fit for my trailer. It has functioned and held up well on the trailer. There have been no problems. Will purchase products again from etrailer.
Comments
It has been a year now since I purchased the hub assembly. I have logged over 1,000 loaded miles. I have not had any problems. Good product at reasonable price.
Pat A - 04/12/2020by: Michael12/07/2020
I converted an old drum brake axle into an idler using your parts. It was quick and easy, a direct fit. I will be using you guys again.
by: KB08/18/2017
Everything fit good and has worked great. Ordering was easy and shipping was fast. I will order from etrailer.com again.
by: Darryl06/20/2019
Great service! Thank you for helping me with ordering the right hub assembly and getting the part to me so fast. I ordered a 5 bolt on 4 3/4 spacing. I couldn't find this part anywhere. The part worked great.
by: Ed08/10/2018
great parts-great price- great service- the parts are always exactly what I need.
by: Stingray02/16/2017
Fast delivery, Great product, Easy instillation.
Comments
Fantastic
John L - 02/16/2018by: Michael09/25/2020
Perfect fit. Been a year and still looking and working great
by: Tom 09/04/2020
This company went beyond the word customer service. Great company... will order from again and again
by: Jim08/29/2019
Part is heavy duty and comes with all parts to replace old hub.
by: Gable04/24/2020
Perfect fit, easy installation.
by: Lyman09/17/2020
It was what I needed.
by: Dan05/31/2022
by: Frank10/04/2016
parts fit great and just what I wanted
by: Marty 06/08/2020
They worked great
by: Adam 06/21/2021
25
36
Show More Reviews
Ask the Experts about this etrailer Trailer Hubs and Drums
- Bolt Pattern Referred To In Hub and Wheel FitGood question. The 5 on 4-3/4 inch and other numbers in that format refer to the location of the lug bolts that the trailer wheels need to match for fit. The stud length has nothing to do with that bolt pattern number nor the diameter of the lug bolt. I've attached an article to help further.
view full answer...
- Hub Bore Diameter of Trailer Idler Hub Assembly AKIHUB-5475-35-KThe Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased # AKIHUB-5475-35-K has a 2.67 center bore diameter. It has a 5 on 4-3/4" bolt pattern, and can accommodate wheels that are between 13 inches and 15 inches. I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - Hubs for 3,500 lb Axle with 5 on 4-3/4 inch Bolt PatternActually the only difference between EZ lube hubs and non-EZ lube hubs is the grease cap that comes with the hub. What capacity axle do you have and what wheel bolt pattern?
view full answer... - How to Determine Correct Idler Hub Assembly for Trailer With 3,500 lb AxlesIt is likely you can use the Trailer Idler Hub Assembly for 3,500 lb Axles # AKIHUB-5475-35-K as it has the most common bearing and seal for 3,500 lb axles, but you'll need to verify this as we don't have any way of knowing the exact hubs that are on your trailer. To determine if this is the right hub, you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If...
view full answer...
- Hub Recommendaiton for Trailer with 5 on 4-3/4 inch Bolt PatternWe do have hubs that have the 5 on 4-3/4 inch bolt pattern you mentioned for a 3,500 lb trailer axle like the etrailer.com hub part # AKIHUB-5475-35-K. You'd need to verify that you axles are 3,500 lb axles though to know if this hub will fit. Typically the capacity is listed on the axle or on the VIN plate up near the coupler.
view full answer... - What Bearing Buddy Fits Trailer Hub # AKIHUB-5475-35-KSince the hub bore of the trailer hub # AKIHUB-5475-35-K is 1.98 inches the correct Bearing Buddy is the part # BB1980A.
view full answer... - Locating Replacement Hubs that Use Same Inner and Outer BearingIn order to locate the correct replacement hub assembly for your trailer, you will want to determine what bearing numbers are used on your existing hubs. These numbers should be stamped right inside the bearings themselves. If you cannot locate these numbers, you can also take a few measurements along the spindle using the attached image as a template. You did mention that the inner and outer bearings on your trailer are the same size, but you will still want to determine their specific...
view full answer...
- Recommended Hubs and Axle for 1984 Skipper Boat Trailer with 5 on 4-3/4 Inch Bolt PatternBased on your bolt pattern, you will want the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 # AKIHUB-5475-35-K. Then for your axles, you will want the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05. This will replace your leaf springs and thru-axle. You will simply need to add a 2 inch square tube to the integrated holes of the assemblies cut to the custom length for the width of your trailer. I've attached videos to assist....
view full answer... - Spindle for Trailer to Use with Hub that has 5 on 4-3/4 inch Bolt PatternTo install a hub with a 5 on 4-3/4 inch bolt pattern like the part # AKIHUB-5475-35-K that you referenced you'd have to go to a different spindle on your trailer axle as there isn't a sleeve adapter of any kind for this type of situation. For a spindle you'd want the part # TRU24FR. You'd need to find someone with experience installing spindles as it's a precision job.
view full answer... - Replacement Trailer Hub Wheel Stud For Trailer Idler Hub Assembly # AKIHUB-5475-35-KThe Trailer Hub Wheel Stud # 7-122 is what you need to replace the wheel stud on your Trailer Idler Hub Assembly # AKIHUB-5475-35-K. The Trailer Wheel Lug Nut # CE11051 will fit this new stud if your current lug nut needs replaced as well.
view full answer... - Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer BearingsThe L44649 bearing is compatible with a 1.062 inch (1-1/16 inch) spindle which is used on 2000, 2200, 2500 and 2700 lb axles. A 5 on 4-3/4 inch bolt pattern hub is found on hubs compatible with a 3500 lb axle, and uses different bearings (L68149 inner and L44649 outer), so we unfortunately don't offer a hub with that bolt pattern that's compatible with your current spindles. This leaves you with a few options. You could replace your existing axle with one that's compatible with the bearing...
view full answer...
- 5 on 4 1/2 Dexter Hub for Homemade TrailerThanks for the measurements. I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 item # 84546UC3-EZ. This hub fits 3,500-lb axles. It has an inner bearing of item # L68149 and race, outer bearing item # L44649, which is slightly small, and race, grease seal, grease cap, wheel bolts, and lug nuts included.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hubs and drums for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hubs and drum information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Video by:
Dustin K
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.