1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 5 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. Standard
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

Item # AKIHUB-550-35-K
lowest price pledge
Our Price: $42.52
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
etrailer 1/2 Inch Stud Trailer Hubs and Drums - AKIHUB-550-35-K
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased part number AKIHUB-550-35-K can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (53)
  • Q & A (38)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-550-35-K

  • 5 on 5 Inch
  • For 3500 lbs Axles
  • Hub
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • L44649
  • 1/2 Inch Stud
  • L68149
  • etrailer

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


  • Application: 3,500-lb trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 5"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

KH-550-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 5 - Pre Greased

Compare to Dexter 84550BX

Customer Reviews

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased - AKIHUB-550-35-K

Average Customer Rating:  4.9 out of 5 stars   (53 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

- AKIHUB-550-35-K

So far so good, even with the extra stress of the wide wheels. I even bought an extra hub to keep in the tool box for a road side repair.

Still working great. It has been across several states, rough highways and dirt roads. Can’t complain.
Zg - 05/22/2021

- AKIHUB-550-35-K

Perfect fit for my 5x12 trailer! The ordering and shipping process was great. Preston was great in matching my old hubs to the new ones. This was my first hub replacement job and I was done in an hour. Will be a repeat customer!!!!

- AKIHUB-550-35-K

The part, (5 on 5" hubs), worked perfectly, and were priced well and delivered on time. The only down side to my order is that we first accidentally ordered a complete axle assembly, hub-to-hub with 5 on 4.5" bolt pattern instead of the aforementioned 5 on 5". We called to get the right hubs sent and thought we could return the unused 5 on 4.5" hubs. Since we packed the bearings and mounted the hubs on the axle, we were told they were now used and could not be returned. They had not made one revolution on the spindle or borne any weight/load. I now have two small boat anchors. I'm very disappointed that we could not clean all the parts and return them. All of this occurred while stranded 250 miles from home while towing a tractor on our flatbed trailer. The new axle and hubs were installed while parked on a gravel road and we're traveling home as I write this. Again, the parts are working well, but the customer service part of the deal could have been better by allowing a return of the hubs we could not use.

- AKIHUB-550-35-K

Excellent value! I can't say enough good things about eTrailer. Awesome and helpful website, great products, best prices, excellent customer service. This product allowed me to replace the bad bearings on my trailer in about a half hour. No cleaning old grease out of hubs, no trying to get old races out, and all for the price other places will charge for bearings alone! I had a slightly rare 5 on 5 bolt pattern, which was impossible to find in local stores. No problem at eTrailer! They always have a great selection and get it to me very quickly. I've finally learned not to waste my time shopping around and to just come here first!

- AKIHUB-550-35-K

Received 5 on 5 hub today and it fit perfectly. I first ordered a 5 on 4 3/4 hub and it was wrong. I had measured the bolt pattern across the hub from center to center stud for 3500 lb axle. That is the way we did it back in the day 30 years ago. Well after talking to Jamie at etrailer she explained I was wrong and had me measure stud to stud beside each other also and explained I needed 5 0n 5.She was very professional and very detailed and had me measure several times to make sure I received the right hub. Well she was right and it fit perfect. I will be buying all my trailer parts from etrailer from here on. Jamie your the the best. Its hard to find people who care or even try to help with anything anymore but Jamie acted like she had all day to help me. Thanks again

- AKIHUB-550-35-K

As always, my order was exactly what I needed for a long trip to ensure a problem free trip. The quality is good.

After many thousands of miles, still a good trouble free product. It makes traveling worry free.
Mike B - 08/11/2020

- AKIHUB-550-35-K

I bought these as spares to carry on trips. After having a bearing failure while towing my race car I became a big believer in having spares. I now replace bearings/races every other year as preventive maintenance even if they look ok. Bearings are all made in China so I think quality varies, regular maintenance is a must. The price is awesome compared to the local trailer dealer for the same product. etrailer is awesome great prices and fast shipping.

- AKIHUB-550-35-K

Great customer service quick shipping it i am trying to give you a excellent review but it won't let me click on it but thanks again for your help merry Christmas

- AKIHUB-550-35-K

I was taking a gamble at the hub I ordered for my 26 year old flatbed trailer but the description said it was a very common format and to my pleasure it fit perfectly. The old hub had a loose inner race which I knew couldn't be good so It had to be replaced. Thyanks guys for accurate discriptions and standing by your products. Sincerely, James Cassity

- AKIHUB-550-35-K

I Used the hub bearing assembly on my 16ft trailer. It was easy to install and have had no problems to date. I use my trailer 3-4 time a month

- AKIHUB-550-35-K

My trailer parts seemed to be competitively priced and they were delivered promptly. The website was helpful in finding the right parts and had good information for the installation. I would recommend etrailer to a friend.

- AKIHUB-550-35-K

Easy install. Took 30 Minutes for 2 hubs. Had to call to make sure the hubs would fit and they were super helpful.

- AKIHUB-550-35-K

i replaced the four hubs and bearings on my trailer. i only took two hours thanks to the instructional videos. everything went smooth.

- AKIHUB-550-35-K

Everything went together just like it should. Very easy and quick to assemble after watching the video. Now I can get the trailer back in use instead of it being a lawn ornament. Thanks.

- AKIHUB-550-35-K

Order process was seamless. Product was shipped right away and arrived on time. Product was replacement hubs for my trailer which were good quality and an exact fit. Would highly recommend etrailer to anyone!

- AKIHUB-550-35-K

The hub is great and the service was, a lso.

- AKIHUB-550-35-K

Finally found the right part at etrailer!! Thank you! This hub isn't common at the parts stores and I couldn't find it locally. Comes with everything you need. You'll have to grease the bearings yourself so have some packing grease handy. I'd share pics but I already fixed the trailer and put it back outside in the cold :) Oh, and the part came a day earlier than I expected. Thanks for that too!

- AKIHUB-550-35-K

Arrived in two days ground. Super easy to install. Took more time packing the bearings by hand than all the rest of the job. I had to replaced the other side because the bearings went out. Wasn't sure which hub I ordered. Called etrailer and the lady was very helpful and was able to look up my last order and confirm the hub I ordered. Great service.

- AKIHUB-550-35-K

great product and great service from the etrailer company thanks to Ms. Courtney '''' for getting my parts to me quick, on the road again. Brookhaven Mississippi , try etrailer

- AKIHUB-550-35-K

I have received all four hubs, it was the exact match for our application. Everything came as expected. Service is prompt, nice folks to deal with even on the phone. I am a repeat customer. I gave it 5 star, however if I had done a bit more research on the website for whole package with EZ grease part and new axle nut and hardware it would have been great but its my fault I got exactly what I ordered according to the part numbers. I am pleased with etrailer.

- AKIHUB-550-35-K

Hub fit perfectly and came with light nuts also. I wasn't expecting that. Shipping speed and price were fantastic

- AKIHUB-550-35-K

Ended up having to replace axle after ordering hub and spindle. Excellent order help, fast customer service. Everyone sells parts. It's the other elements of service that count. etrailer worked like that for me.

- AKIHUB-550-35-K

I have had the hub on for a year now. No problems so far. Great product for the price

- AKIHUB-550-35-K


- AKIHUB-550-35-K

Could have included the castle nut and washer but cant be at the deal or the ease of ordering.

Show More Reviews

Ask the Experts about this etrailer Trailer Hubs and Drums

  • Dexter 008-256-07 Trailer Hub Replacement
    The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part # AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or, we have the part # 84550UC1-EZ which is already pre-greased and ready to install.
    view full answer...
    Image 1 for
  • Converting 3500lb Axle Hub From Grease to Oil Bath
    For the Trailer Idler Hub Assembly # AKIHUB-550-35-K to be converted to an oil bath you will need the Kodiak XL ProLube Kit # XLPROLUBE1980KIT. This will provide you with new caps that have the threaded see through cover to check your oil level. Also new oil seals to replace your current grease seals. I recommend picking up a spare Hub Body and Cap # xlprolube1980 and some extra Bearing Oil # XLPROLUBE to keep with the trailer in case one of the caps becomes damaged or fails to prevent...
    view full answer...
  • 2k Rated Axle System for Off Road Trailer and Hubs with 5 on 5 inch Bolt Pattern
    From the research I did the 2015 Jeep Wrangler with 17-18 inch wheels would have a 5 on 5 inch bolt pattern. For a 2k rated Timbren Axle Less system that has a 4 inch lift built into it and is setup for wider tires we have the part # ASR2KHDS03 and then for an idler hub that will fit the spindle that has the correct bolt pattern you would want the part # AKIHUB-550-35-K.
    view full answer...
  • Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?
    First things first; you can determine the specs on your current axle by checking for a sticker or plate attached to the axle itself (you'll usually find it close to the center of the axle). But with that being said, in the event that you can't find anything on the axle itself that would specify the capacity, you'll want to use the bolt pattern on your hubs and the bearings to provide you with a matching hub for your axle and spindle. I'll also say that the L68149 and L44649 are two of the...
    view full answer...
  • What Spindle Will Etrailer.com Trailer Idler Hub Assembly # AKIHUB-550-35-K Fit
    The Trailer Idler Hub Assembly for 3,500 Pound Axles - 5 on 5 # AKIHUB-550-35-K referenced in your question are compatible with 3,500 pound axles with #84 spindles like the Redline # R20384EZ. I have attached an image showing the dimensions of this spindle for your review. This hub assembly includes the L68111 inner race and L44610 outer race as well as the inner bearing L68149 and outer bearing L44649.
    view full answer...
    Image 1 for
  • Will the Trailer Idler Hub Assembly AKIHUB-550-35-K Work With Vehicle Wheels
    The Trailer Idler Hub Assembly part # AKIHUB-550-35-K is designed to be used with lug piloted trailer wheels with a 5 on 5" bolt pattern like the Dexstar Steel Spoke Trailer Wheel part # AM20428. In regards to compatibility with vehicle wheels; this is usually not possible because of the bolt pattern not aligning, there being an offset, and some being hub-centric. Therefore, I cannot recommend this.
    view full answer...
  • Trailer Axle Compatibility with 5 on 5 Inch Hubs for Trailer Upgrade
    For your trailer you will actually need to change out your axles. The spindles you mentioned are not compatible with any of the 5 on 5 inch hubs. All of the options for the 5 on 5 inch hub assemblies are for 3,500 lb axles with # L68149 inner bearings and # L44649 outer bearing. I've linked the page to all your options to assist. Then I've linked the page to all your axles that are compatible and you will want to determine the hub to hub dimension required as well as your spring...
    view full answer...
  • Replacement Idler Hub Recommendation for 1999 EZ Loader Trailer
    The hub part # AKIHUB-550-35-K will work for you with it's included grease seal. The outer diameter may be different, but since that is what fits to the hub (what you are replacing) it would not matter. The inner diameter matches up which is the most important.
    view full answer...
  • What Size Trailer Wheel Center Hole Fits Trailer Idler Hub for 3,500lb Axles 5 on 5 AKIHUB-550-35-K
    Basically, 2.62 inches is the smallest wheel pilot hole for Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 Item # AKIHUB-550-35-K. The hub takes wheels as small as 14 inches and the smallest pilot hole diameter on a 14 inch wheel is 2.62 inches. The vast majority of 14 inch wheels will have a 3.19 or 3.27 inch pilot hole though.
    view full answer...
  • Does 3,500 lb Trailer Hub # AKIHUB-550-35-K Fit Timbren Axle Less Kit # ASR2KHDS03
    Yes, the Trailer Idler Hub Assembly # AKIHUB-550-35-K that you referenced does fit on the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03 that you referenced. This hub is designed for trailer wheels with diameters between 13 inch and 17 inch. It sounds like you may be wanting to install vehicle wheels on this trailer (this question comes up a lot with off road trailers) so you should note we cannot recommend this.
    view full answer...
  • Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
    Currently the only trailer hubs we offer with a 5 on 5 bolt pattern are the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-550-35-K, and the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # AKIHUB-550-35-EZ-K which both have an outer diameter of 6-1/4". Both of these hubs are designed for spindles that use inner bearing # L68149 and outer bearing # L44649. To confirm that these hubs will fit your spindles you will want to remove one of your current hubs and verify that...
    view full answer...
    Image 1 for Image 2 for
  • Can I Use 18 inch wheels with the Trailer Idler Hub Assembly # AKIHUB-550-35-K
    We recommend using 13-15 inch wheels with the Trailer Idler Hub Assembly # AKIHUB-550-35-K because the surface of the hub that contacts the wheel isn't large enough to support a wheel larder than 15 inches. With that little of contact, it will not be stable enough to be safe. You can use this wheel # A225R65SM. I chose this wheel because they have a nice clean look to them. The grey powder coating looks good and will help it resist against rust and corrosion.
    view full answer...
  • Which Grease Seal For Dexter 3500lb Idler Hub 008-256-07?
    The Dexter 3500lb Idler Hub 008-256-07 you have on your Jamar Trailer uses grease seal # RG06-050. If you need bearings as well you can use Bearing Kit # BK2-100 which includes inner bearing # L68149, outer bearing # L44649, races, grease seal # RG06-050, and a new cotter pin and tang washer. I included videos of the products mentioned for you to take a look at .
    view full answer...
  • Availability of Trailer hub with 5 on 5 inch Bolt Pattern
    We have replacement hubs for trailers that have the 5 on 5 inch bolt pattern you have but they'll need to be 3,500 lb axle assemblies as that's only capacity we have that bolt pattern in. For a hub drum you'd want the # AKHD-550-35-EZ-K or for an idler part # AKIHUB-550-35-K. To verify your axle capacity you can check the axle for a plate with ID info and the capacity should be listed there. Or you can measure diameter of axle and if it's 2-3/8 that would indicate it's 2,500 as well.
    view full answer...
  • Differences Between Trailer Idler Hubs With a 5 on 5" Bolt Pattern
    Each of the trailer idler hubs with a 5 on 5" bolt pattern are a fit for 3,500 lb axles and use inner bearing # L68149 (1.378" inner diameter), outer bearing # L44649 (1.063" inner diameter), and grease seal # 58846 (1.719" inner diameter) so you will want to make sure those are the correct bearings and seal for you. You can do this by taking apart your current hub and looking at the bearing numbers, or by using Digital Caliper # 301-17068 and measure your spindle to the thousandths...
    view full answer...
    Image 1 for
  • Timbren Axeless Suspension System For 5 on 5 Bolt Pattern Wheels To Help With Tire Clearance
    I can certainly recommend a Timbren axle-less system for you. The Timbren Silent Ride Suspension does not have a bracket to flip the axle because there wouldn't be a way to attach the system to the frame if the axle is flipped. When you "flip the axle" you are putting the leaf springs or suspension above the axle which is not going to work with the Timbren Silent Ride system. I also checked to see if they had any spacers available to help with tire clearance and they do not. I recommend...
    view full answer...
  • Timbren 3500 lb Rated Axle-Less Suspension and Compatible Idler Hub for Home Made Trailer
    The 3500 lb Timbren Axle-Less suspension kit # ASR3500S05 would be a good choice. The spindles provided with the # ASR3500S05 would indeed be compatible with the bearing set provided with the # AKIHUB-550-35-K idler hub, but since the Timbren Axle-Less suspension you've chosen features E-Z lube spindles, you'd want to go with # AKIHUB-550-35-EZ-K which provides the E-Z lube compatible dust caps with removable plugs so you can easily access the grease zerk without needing to remove the entire...
    view full answer...
  • Hub Recommendation for Timbren Axle-Less System ASR1THDS03 with Jeep Bolt Pattern
    Typically the Jeep wheel bolt pattern is 5 on 5 inch. For an idler hub that will fit the spindles of the part # ASR1THDS03 and have the correct bolt pattern we have the # AKIHUB-550-35-K. This is a 3,500 lb trailer hub. The # ASR1THDS03 has a 4 inch lift built into it so it would work well for you since your Jeep is also lifted.
    view full answer...
  • Recommended Idler Hub For Boat Trailer With 3,500-Lb Axle
    We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. I have attached a link to our product page for the 3,500-lb hubs we offer. The bolt pattern can be a bit different so you will want to determine which one you need. I have attached a helpful article that explains how to find the correct bolt pattern you need for your wheel. If you have a 5 on 4-1/2 pattern...
    view full answer...
  • Timbren Axle Less System for Trailer with Jeep 5 on 5 inch Bolt Pattern
    The Jeep wheel bolt pattern is 5 on 5 inch which we do have a way to accomplish what you are wanting. For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # AKIHUB-550-35-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
    view full answer...
  • Recommended Timbren Axle-Less Trailer Suspension for 5 on 5 inch Jeep Wrangler Tire
    The Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange # ASR2000S02 does have the ability to incorporate a hub that has a 5 on 5 bolt pattern. If you would like just the hub it is part # AKIHUB-550-35-K and if you would like to have brakes you will need the Hub and Drum # AKHD-550-35-EZ-K, Right Hand (passenger's side) Brake Assembly # 23-48, and Left Hand (driver's side) Brake Assembly # 23-47. With that being said, we highly recommend using trailer tires on a trailer...
    view full answer...
  • Replacement 5 On 5 Idler Hub For Homemade Trailer
    I have a couple options for your consideration as we do not have a replacement hub or bolt on spindle that will fit your combination. First you can remove your spindle brackets and have new #84 Spindles # TRU24FR welded in place of the current spindles. This would move you to the most common spindle size and allow you to use the Trailer Idler Hub Assembly # AKIHUB-550-35-K. This will come preloaded with the new bearings, races and grease seal installed and greased. The second option...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Do You Have 2015 Little Guy Tag Trailer Lift Kit
    We have a two options available for you although with your square axle there isn't a basic "Lift Kit" that will work for you. The two options are basically the same thing just one is made for larger off road tires and one is made for standard tires. The Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - # ASR1THDS03 and the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Regular Tires - part # TASR1THDS04. Both systems...
    view full answer...
  • Replacement Hubs With 5 on 5 Bolt Pattern
    We do have hubs available with a 5 on 5 bolt pattern; they are each compatible with 3,500 lb axles, have inner bearing # L68149 and outer bearing # L44649 and fit wheels that are between 13 inches and 15 inches. You need to take apart your old hub in order to find out if you have the same bearing numbers. If so hub and drum assembly # AKHD-550-35-K will work; for an idler hub assembly # AKIHUB-550-35-K would be the right choice. I've added a link to video reviews of these parts for you...
    view full answer...
  • Replacement Hubs and U-Bolt Kit for 3,500 Pound Lippert Axle # LC35212150
    From my research your axle is a 3,500 pound, 2-3/8 inch diameter axle and since you have a 5 on 5 bolt pattern you likely have bearings # L44649 and # L68149. You'll want to verify this is correct with your current bearings. If this is the case for a hub and drum assembly I recommend # AKHD-550-35-EZ-K which is for E-Z Lube axles with a zerk fitting. If you have standard axles use # AKHD-550-35-K instead. If you only need idler hubs use # AKIHUB-550-35-EZ-K with E-Z Lube axles and...
    view full answer...
  • Off Road Timbren Axle Less Recommendation that Can Be Used with Jeep Bolt Pattern
    The part # ASR35HDS02 only has hubs with 6 lug patterns and up since it's a higher rated system. It's odd because the axle is 3,500 lb rated but designed for 6k rated hubs. Isn't the 5 lug pattern you mentioned the Jeep bolt pattern? Typically the Jeep wheel bolt pattern is 5 on 5 inch. For an idler hub that will fit the spindles of the part # ASR1THDS03 and have the correct bolt pattern we have the # AKIHUB-550-35-K. This is a 3,500 lb trailer hub. For a hub drum we have the # AKHD-550-35-EZ-K. The...
    view full answer...
  • Which Axle-Less Trailer Suspension For Custom Kayak Trailer With 15" wheels and 33x12.5 Tires
    For your custom kayak trailer I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS02 which is a straight spindle 2000lb rated axle-less system for wide tires. The Timbren # ASR2KHDS02 will use the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84545UC1-EZ which will fit a 15" wheel with 5 on 4 1/2 bolt pattern, or the # AKIHUB-550-35-K if the wheels you plan on using are a 5 on 5 bolt pattern. Either option will work with the 33x12.5 tire you plan...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-1624