Weld on the assembled L-bend swivel bracket and easily swing this jack up for travel and down for use. Jack has 11" retracted height and measures 6-1/2" from mounting bracket to top. Includes plunger pin and footplate.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be reviewing part number BD151109. This the Bulldog Side-Wind Jack with a retaining ring swivel, also includes the base, rated at 2,000 pounds. The convenient spring-loaded plunger-pin swivel feature is mounted here on the side of the jack with an L-bend weld-on bracket. This portion is going to weld onto your trailer. Then, you would pull the pin. It's going to allow you to swivel your jack up into a store position or back into an upright position to support your trailer. This jack does have precision fitted parts that provide exceptional stability and reliability.
The side-wind handle has a smooth ergonomic finish for easy cranking. It's going to provide us with a radius of 5 13/16". The weld-on L-bend bracket comes assembled and also the footplate is included. The footplate has dimensions of 4" x 7 1/2". Our L-bend bracket is going to measure 5" x 4 1/2". When the jack is fully retracted, we're going to have a bracket height measurement of 11".
That's measuring from the center of the bracket to the bottom of the footplate. With it fully extended, that measurement increases to 21". If we subtract those two measurements, we're left with 10" and that's where we get our lift measurement from. This jack provides a clearance, from the center of our mounting bracket to the top of our jack, of about 6 1/2". Our outer tubing provides a diameter of 2 1/4" and our inner tubing has a diameter right at 2".
Our plunger-pin here on our swivel feature has a diameter of 1/2". The jack has a lift capacity of 2,000 pounds. That's going to complete today's review of part number BD151109. This the Bulldog Side-Wind Jack with a retaining ring swivel including the base, rated at 2,000 pounds. .
Average Customer Rating: 4.7 out of 5 stars (165 Customer Reviews)
Weld on the assembled L-bend swivel bracket and easily swing this jack up for travel and down for use. Jack has 11" retracted height and measures 6-1/2" from mounting bracket to top. Includes plunger pin and footplate.I bought this a few years back and finally installed it - great product. Simple to use, easy to install and I love that when mobile, it folds away underneath the trailer tongue. Would buy again (but hopefully don't need to soon).
Excellent service. The correct part we ordered arrived in a vey timely manner. We are very satisfied.
This is the smoothest, easiest turning trailer jack I have ever used! The build quality is excellent. Highly recommend this for any trailer application needing a swivel jack. This is a 2,200 lb capacity hydraulic dumping trailer.
Fit my existing welded on hub
Works as described nice quality construction.
Product fit my trailer perfectly. Part was damaged but Stacey took care of it and all is well. Perfect Customer Service.
Joshua B. Was so helpful the whole process was easy. If I need any trailer parts ever I will be using this site and contacting Joshua if needed. Thank you very much Joshua for all the help. Much appreciated!!
Great jack
The jack did not come with the weld on bracket or the snap ring. I’ve never bought one prior that didn’t include the bracket and snap ring.
etrailer.com made the impossible happen! I am in purchasing and I needed fifty, identical, 2000lb Jacks. With etrailer.com my needs were meet, and they delivered in less than two days! With slight modification I could rigid mount these swivel jacks on dollies for a major aerospace company. I know when i need any trailer equipment for my business needs, or my personal needs, the only place I will go is etrailer.com
Ridiculously prompt order fulfillment and shipping. Quality product, works perfect. As always, etrailer is the place to go. Was about $40 cheaper than other online retailer.
I love the Bulldog Round, Snap-Ring Swivel Jack - Topwind - 10" Lift - 5,000 lbs
Looked everywhere for what I needed, only etrailer.com had what I needed and there site was easy to navigate, my shipment arrived promptly - couldn't be more pleased.
Works great. Only difference was the locking pin diameter.
Great price! Great tracking of shipments! Side mount handle replaced our top mount handle so box would mount easily.
it is not satisfactory no snap ring or mounting braket first time I have ever seen this should not be alowed to sell like that
the trailer jack on my trailer was in the way of me putting my tailgate on my truck down so, I buy the bulldog trailer jack . I like how easy it is to install on the fame rail of my trailer. It is easy to use to lift and lower on to the hitch ball. I like the trailer jack swing up and out the way. The new trailer as solve the problem so I can put my tailgate down on my truck now.
etrailer has Great Products for Building or repairing trailers! This jack can be installed in several locations or configurations.
Got it on fits good like the old one but at lease this one goes up and down!
Cant go wrong with bulldog jacks. Needed one for log splitter that got bent ordered from etrailer the exact part number of old one, showed up quick and went right on easily.
Fit on the same mount as my 25-year old bulldog jack, really glad it kept the same size and I didn't have to remove and weld on the new mount. Tight as a tick when it comes to motion, zero flex. Hope to get 25 years out of this one as well
They are an excellent quality jack. As long as the contractors remember to crank them back up before moving trailers...lol
My 30 year-old Bulldog snap-ring swivel jack finally failed. The first place I looked for a replacement was ETRAILER.COM. I knew they would have it. This is a great product because I was able to remove the snap-ring from the 30 year-old welded on mount and replace the old jack with the new one...in just a few minutes. It is nice to depend on Bulldog for not changing the jack design or dimensions over the years.
They have held up very well after a year of using these on my off road trailer. Haven't had to grease them yet and the winding mechanism is smooth and effortless.
Do you have a question about this Trailer Jack?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.