bing tracking image
  1. Trailer Jack
  2. Bulldog
  3. Car Hauler
  4. Enclosed Trailer
  5. Utility Trailer
  6. 4001 - 5000 lbs
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs
Bulldog

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs

Part Number: BD178203
In Stock
$111.41
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle. Great Prices for the best trailer jack from Bulldog. Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs part number BD178203 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (127)
  • Q & A (0)
  • Photos
  • Used (1)

Bulldog Trailer Jack - BD178203

  • Car Hauler
  • Enclosed Trailer
  • Utility Trailer
  • 4001 - 5000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Pipe Mount
  • Weld-On
  • 15 Inch Lift
  • With Rectangle Foot
  • Bulldog
  • Steel

Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.


Features:

  • Dependable jack is recognized as industry standard for agricultural and commercial applications
    • ASABE compliant
  • Tubular swivel design lets you swing jack up for travel, down for use
    • Included pull pin holds jack in place
  • Precision-fitted parts provide exceptional stability and reliability
  • Sidewind handle has smooth, ergonomic design for easy cranking
  • Outer tube is gray-paint finished
  • Inner tube is zinc plated
  • Weld-on pipe mount and standard footplate included


Specs:

  • Bracket height:
    • 15-3/8" Retracted
    • 30-3/8" Extended
  • Lift: 15"
  • Clearance: 6-3/8" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Handle radius: 5-13/16"
  • Pull pin diameter: 5/8"
  • Lift capacity: 5,000 lbs
  • Limited 5-year warranty


178203 Bulldog Round Tubular Swivel Jack, Sidewind, 15" Travel, 5,000 lbs - SWL 178 DTSF w/ P & C




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs - BD178203

Average Customer Rating:  4.8 out of 5 stars   (127 Customer Reviews)

Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.

by:



by:



by:



by:



by:



by:



by:



by:



by:

Exactly what I needed. Arrived next day



by:

Great product and highly recommended by a friend



by:

Just what the doctor ordered



by:

Works like it should



by:

Good prices, excellent delivery...received the items before I expected them.



by:

Very good quality.



by:

Thanks for the "SUPER FAST DELIVERY" !!! Great product, and a great Deal !!!!



by:

This works really good!



by:

The jack was actually heavier than I thought it would be, very good quality, materials and construction.



by:

Quick delivery and high quality part. Perfect fit.



by:

Katherine was very helpful in getting the order correct. The quality appears to be there on the product. In the future I would order from your company again.



by:

Very good service. Got exactly what I was looking for. Fast delivery. Very nice and helpful people to work with.



by:

The only issue was the box was damaged when it arrived. The plastic knob on the crank handle was in pieces. I think we can remove the one off the old jack and use it. UPS is not real gentle when they load and offload packages. Otherwise everything was in good shape. Thank you, Stephen Tallman, SDG&E



by:

Great product, has held up to its name. Very good customer assistance and prompt delvy. Awesome job all around.



by:

Good deal



by:

Arrived Early



by:

it's what i needed for the zero turn mower to make changing blades very simple to lift and have sufficient room to clear the mower's hood.


25
127
Show More Reviews

See what our Experts say about this Bulldog Trailer Jack

  • Trailer Jack Solution for Trailer Tongue that is 6 inch by 3 inch
    That is a pretty tall trailer frame but we do have a solution Dan. You could use the part # HD50000101 unless you wanted a swivel option. Then I would go with a weld on style jack like the etrailer # TJD-7000S for a sidewind or the part # TJD-8000 for a top wind. Or if you wanted something that could swivel you'd want a pipe mount like the part # BD178203.
    view full answer...
  • What Pipe Mount Could Pro Series Trailer Jack # PS1401140303 Fit
    The Pro Series trailer jack part # PS1401140303 that you referenced is designed to fit on a pipe mount diameter of 2 inches so if that's the size you have now (it looks like you do) then yes, this would easily fit on the same mount for an easy install. If you have a different diameter let me know and I'll see what might fit.
    view full answer...
  • Mounting Ring Diameter for the BullDog Round, Pipe-Mount Swivel Jack # BD198250
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Mounting Ring Pipe for Bulldog Swivel Jack BD178203
    It looks like the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 5,000 lbs, item # BD178203 has a 2 inch outside diameter male receiver with a 5/8" pin hole that welds to the trailer frame, so you can use the Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks # DL22670. I do recommend you check the diameter of that outer pipe to confirm this will fit. If you find you've got a different outer diameter on that mounting pipe, just let me know and I can get...
    view full answer...
  • Is the Bulldog BD178203 Compatible with the Fastway Flip Foot
    I have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs # BD178203 is not compatible with the Fastway Flip Foot # FA88-00-4500 since the leg and inner tube are a single piece. Instead, you'd need to use a jack that had a removable foot on the drop leg like the Pro Series Square Jack with Footplate - Drop Leg - Topwind - 28-5/8" Lift - 5,000 lbs # PS1400800383 or the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 28-1/2" Lift...
    view full answer...
  • Jack Recommendation for a Trailer that has a Pipe Mount that Is 2-3/8 Inch OD and 2 inch ID
    The Bulldog Round, Pipe-Mount Swivel Jack # BD178203 is designed to fit a pipe mount that has a 2-1/2 inch outer diameter and a 2 inch inner diameter which is very close to what you have on your trailer. As long as the pin hole on your pipe mount is 5/8 inch in diameter this jack would work well for you. I attached a review video for you to check out as well. This is a 5,000 lb jack that should work well for you.
    view full answer...
  • What is the Difference Between Bulldog and Pro Series Pipe-Mount Swivel Jacks
    The differences between the two jacks is minimal. The main feature difference is that the Bulldog # BD178203 has the ASABE (American Society of Agricultural and Biological Engineers) compliancy certification whereas the ProSeries # PS1401440303 does not. Bulldog uses this compliancy certification to test durability and longevity whereas the Pro Series jacks do not use this process. The other main difference is the Bulldog has a 5 year warranty and the ProSeries has a 1 year warranty. The...
    view full answer...
  • Bulldog Round Side Mount # 178203 Overall Height
    The overall height of the Bulldog trailer jack part # BD178203 when it's retracted is 21-3/4 inches overall.
    view full answer...
  • Trailer Jack Pipe Mount Upgrade From 3,000 lb Bulldog Swivel Jack
    Thank you for the pictures and info! Since you had a Bulldog winch I recommend sticking with that brand because they are reliable and you can be confident that the pipe mount will match up exactly. To upgrade from a 3K we have the 5K # BD178203 or 7K # BD198250 depending on how much extra capacity you'd like. They both have a 15" lift and they are backed by a limited 5-year warranty so either one will fit your needs just fine.
    view full answer...
    Image 1 for Image 2 for
  • Is 5,000 lb Bulldog Topwind Jack Stronger or Easier to Use than Bulldog Sidewind Jack
    The sidewind and top wind 5,000 lb Bulldog pipe-mounted trailer jacks you asked about have the steel construction with a zinc-plated inner tube and 5,000 lb capacity, so they are equal in strength. We also have a similar version by Pro Series. They also have the same ease in regard to cranking, though this can be based on personal preference. Some people would rather crank vertically (sidewind) as opposed to horizontally (topwind) and clearance is also another consideration if there's...
    view full answer...
  • Replacement Handle for Bulldog 5K Sidewind Swivel Trailer Jacks with Round Tubes
    For Bulldog trailer jack # BD178203 the correct replacement handle is # BD500105.
    view full answer...
  • Can I Exchange my A-frame Trailer Jack for a Side Mount Jack so Tailgate Can Be Lowered?
    I can certainly understand how you would like to lower your truck tailgate while hitched to a trailer. Yes, you can switch from an A-frame jack to the Bulldog # BD178203 side mounted swivel jack. You will need to weld on the pipe mount of course. With your current jack, adjust the jack height until the trailer is level, then measure from the top of the coupler to the ground. From that measurement add 4" and that is the height you need. If 15" is long enough, then the BD178203 is good...
    view full answer...
  • Weld-On Jack Pipe Mount Recommendation for a12,000 lb Equipment Trailer
    I went out into our warehouse and pulled a Bulldog Round, Pipe-Mount Swivel Jack, part # BD178203, that has the same 2 inch inner diameter and 2.5 inch outer diameter pipe mount swivel jack as yours. I then test fit a Bulldog 2-1/2 inch Long, Weld-On Jack Pipe Mount for 2-1/2 inch, part # BD005024, and a Bulldog 2-1/4 inch Long, Weld-On Jack Pipe Mount for 2-1/2 inch, part # BD015279. I found that either will work dimensionally, the # BD015279 will fit on the inside and the # BD005024...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Bulldog Jack Recommendation to Fit Trailer with Round Pipe Mount
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
  • What Size Pipe Does Pro Series Swivel Trailer Jack, # PS1401440303, Fit On
    I spoke with my contact at Pro Series about the Swivel Jack, # PS1401440303. He stated that the mount will fit on a 2 inch diameter pipe on the trailer. The pin is a 5/8 diameter pin. It does also come with a pipe of its own that you can weld to the trailer should you need to. The mount diameter is the same for Bulldog Round, Pipe-Mount Swivel Jack, # BD178203.
    view full answer...
  • What Tubular Swivel Trailer Jack Is Available To Replace A Bulldog 170 Series
    The Bulldog Trailer Jack, # BD195304, you have referenced is a direct weld jack. A similar jack to the # BD195304 in a tubular swivel mount with a round mount would be the Bulldog Round, Pipe-Mount Swivel Jack - Topwind, # BD178151. It has a 5,000 lbs. support capacity, 15 inches lift and is a topwind. The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind, # BD178203, is a tubular swivel mount with a round mount and it also has a 5,000 lbs. capacity, 15 inches of lift, but it is a sidewind.
    view full answer...
  • 1,000 lb Jack Recommendation for Boat Trailer with 2 inch Pipe Mount
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
  • Recommendation for Replacement Bulldog Trailer Jack
    I would need the model number of your jack to find the exact match. We do have several Bulldog side crank jacks that are a possible fit. I have included a link below to our Bulldog swivel jacks, pipe mount with 15" lift. There are round and square jacks with weight capacities from 2,000 to 8,000 lbs.
    view full answer...
  • Is There a Replacement Gear Kit Available For The Reese Pro Series 5,000LB Jack # 1401440303?
    Reese does not offer any rebuild kits for their Pro Series jacks like yours # PS1401440303. Your options are to replace it with the same jack or upgrade to one like the Bulldog # BD178203 which does offer a Replacement Gear Kit # BD5002581360
    view full answer...
  • Recommendations for Side-wind Pipe-Mount Weld-On Swivel Jacks Rated for 5000-8000 Lbs
    We offer the Bulldog Round Pipe-Mount Swivel Jack rated for 5000 lbs, part # BD178203. This includes the 2-inch weld-on coupler pipe (and retaining pin and clip) and the foot plate. This jack offers 15 inches of lift. Please refer to the video link provided. We also offer the Bulldog Square Swivel Jack, part # BD190758, which also provides 15 inches of lift, includes the 2-inch weld-on coupler pipe, pin and clip, and footplate. This jack is rated for 8000 lbs static capacity and also offers...
    view full answer...
  • Recommended Trailer Jack To Clear Tailgate With A-Frame Trailer
    I do have an option for you but the tongue jack only needs to be rated for the tongue weight of your trailer which will only be around 10-15% of its loaded weight. Therefore, you are likely only going to need around a 700-1,000 lb weight capacity. The higher rated you go, the better off you will be but an 8,000 lb option would be far too much. In order to clear your tailgate while the trailer is attached you are likely going to need a side mount, swivel option. I recommend the Bulldog Round...
    view full answer...
  • What Type Of Trailer Jack Will Fit a Trailer With a 8" Tall Frame?
    Typically trailers with an 8" tall frame will have mounting for a A-Frame type Jack # 3370091265. This is mainly because jacks like the # ARK57FR can only fit up to a 6" tall frame. You do an option to add a Pipe-Mount Swivel Jack # BD178203 by either welding the pipe mount to the frame or creating a bolt on bracket you will be able to attach to the side of the frame with the included pipe. This jack has 15" of total lift with a height of 15-3/8" from the mounting bracket to the bottom...
    view full answer...
  • How To Fix Topwind Jack From Hitting Toolbox On Trailer Frame
    The best option we have to give you clearance for the handle would be a side wind jack, the Bulldog Round, Pipe-Mount Swivel Jack part # BD178203 which I can't imagine would hit the toolbox. That said, this would really be the only option as there isn't another choice aside from topwind and sidewind.
    view full answer...
  • Pipe Mount Trailer Jack
    In your case the setup is designed for the jack to fit inside of the pipe mount rather than outside the Bulldog Round, Pipe-Mount Swivel Jack part # BD178203 is designed to fit a pipe mount that has a 2-1/2 inch outer diameter and a 2 inch inner diameter. As long as the pin hole on your pipe mount is 5/8 inch in diameter this jack would work well for you. I attached a review video for you to check out as well.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Used Items Available
Used Picture for Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs
Used Picture for Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs
Used Picture for Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs

Condition: Missing Parts

Notes: Item is missing the weld-on tube. Minor scratches present. Otherwise new and unused.

$79.24
Add to Cart
Secure Checkout

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Installed by:
Patrick B
Employee Adam E
Installed by:
Adam E
Employee Aidan B
Installed by:
Aidan B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924