bing tracking image
  1. Trailer Jack
  2. Dutton-Lainson
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Bolt-On
Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs

Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs

Item # DL22339
lowest price pledge
Our Price: $415.79
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant square swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip. Lowest Prices for the best trailer jack from Dutton-Lainson. Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs part number DL22339 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (61)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dutton-Lainson Trailer Jack - DL22339

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 12 Inch Lift
  • With Wheel
  • Dutton-Lainson

Corrosion-resistant square swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.


Features:

  • Marine jack lets you raise and lower your boat or recreational trailer
    • Square tube is stronger and holds more weight when compared with a round tube
  • Convenient swivel-pin lets you pivot jack 90 degrees
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Extra-wide plastic wheel lets you easily move your trailer
    • Tread pattern creates an off-road look
    • Inner tube rotates with wheel allowing you to move in any direction
  • Deluxe, all-black sidewind handle has cushioned grip
  • Drain holes at bottom of inner post prevent water buildup
  • Zinc TUFFPLATE finish protects components from corrosion
  • 4-Bolt plate lets you easily mount jack to trailer frame
    • Charcoal powder coat helps prevent corrosion
    • Mounting hardware included
  • Charcoal gray color
  • Made in the USA


Specs:

  • Application: trailers with a frame height from 3" to 4-1/2"
  • Bracket height (from bottom of wheel to top hole of bracket):
    • 16-5/8" Retracted
    • 28-5/8" Extended
  • Lift: 12"
  • Lift capacity: 1,700 lbs
  • Wheel dimensions: 8" diameter x 3-5/16" wide
  • Pull pin diameter: 1/2"
  • Tube diameter: 2-1/2"
  • Handle radius: 6-1/8"
  • 3-Year limited warranty


22339 Dutton-Lainson DLx-SW Square Swivel Tongue Marine Jack - 8" Diameter Wheel - Bolt On - 12" Travel - 1,700 lbs






Customer Reviews

Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs - DL22339

Average Customer Rating:  4.8 out of 5 stars   (61 Customer Reviews)

Corrosion-resistant square swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.

by:

Perfect fit. Much better jack than the OEM.


Comments
Jack is awesome! Supports my boat very well. Extremely easy to roll in and out of my garage.
Randy - 04/16/2021


by:

I like this jack I’ve had many other jacks this one works smoothly better than others




by:

Fast delivery, item is exactly as advertised. They also honored their price pledge guarantee.




by:

REPLACED MY RANGER JACK WITH THIS AND IT MAKES IT SO MUCH EASIER.




by:

Quality product and arrived almost entirely put together in the box. Bolting the side plate and jack onto the trailer only took a few minutes and it's very sturdy. Very little effort needed to crank it up and down. I have a 26' center console with about 500lbs of hitch weight and with the oversized wheel had no problem moving it around in the garage. Heavy pin and spring to lock it in the up position when traveling and down position when in use. LOVE the black color as it matches my trailer. Highly recommend.




by:

Sturdy & ergonomic, certainly better than the one I had on there previously :)




by:

Well I wanted to solid built Trailer Jack with a wheel
And I don’t think I could’ve gotten any better it is well built solid no worrying about it breaking as I am pushing the trailer around! Super satisfied




by:

Just received and installed but have not put to any significant use. Seams to be built extremely well.




by:

Very well built. Got this for my 22' boat. Easy to install the only issue I ran into was either the bolt or the nut threads were bad and had to go to the local hardware store and get a new one. Otherwise, the jack itself is built very well.




by:

This is the best jack I’ve ever had




by:

Just the right product




by:

durable




by:




by:




by:




by:

Review from a similar DLx in Trailer Jack


This was disappointing out of the box. First, this will not fit on a Magic Tilt aluminum trailer unless mounted sideways. The backing rails, which are properly sized, are five hole, but the face is four, and mounting sideways means bolts won't be flush with top and/or bottom of frame. This is clearly not the way this should be done, half the mount that should be against the frame is against nothing. Secondly, and most disconcerting, are the four carriage bolts that hold the mount swivel are about 1/16" too long, preventing the mount from laying flush against the trailer frame anyway. So I had to make a trip to the hardware store for replacement hardware, disassemble and reassemble with the shorter carriage bolts. Both of these issues just seem frustratingly odd. This replaced a $50 TS jack that salt did in after five years and is no longer made. The D-L has a much smoother motion, but after mounting it has the same amount of play when extended as the cheaper jack.
One last note, this was packed loosely in a large box. Some of the paint was already scuffed off the part that holds the wheel, so I'm not optimistic about the protection this "Tuffplate" finish offers if cardboard can remove it. The bag of hardware was still stapled, but two of the mounting bolts were loose and one of the split washers was just missing. I used a spare nylon locknut on that bolt.
It should not be this hard to find a decent, hassle-free jack at a decent price.
Pics of longer stock bolt beside shorter replacement, potential mounting gap that would cause, and jack mounted sideways on frame.


Comments
I will have our Customer Service team reach out to you. This jack is meant to work with trailers that have a frame height of 3 - 5 inches. The jack uses a 4 bolt plate to let you mount the jack to the trailer frame. You will want to make sure you are mounting it in a location along the frame where it not interfere with the operation of the trailer. I recommend watching the video that we have on the jack and watching from mark 1:30 to see where we mounted it to the frame.
-- Etrailer Expert Jenny N - 03/09/2022


by:

Review from a similar DLx in Trailer Jack


This trailer jack is just what I needed. The range is fantastic, the handle is comfortable and raising and lowering the boat trailer has never been easier




by:

Review from a similar DLx in Trailer Jack


I bent my boat trailer jack accidentally and needed a new one. So etrailer was there for me with this very nice Dutton-Lainson version similar to the one I had. Works great, very smooth gearing, and it looks good on my boat trailer too.




by:

Review from a similar DLx in Trailer Jack


You definitely get what you pay for. This Jack is built extremely well and works flawlessly.




by:

Review from a similar DLx in Trailer Jack


I was looking for a heavy duty wheel jack and something I could easily relube since I put my trailer in the water frequently. I am very satisfied with this jack, it's easy to crank and very sturdy and has 2 zerk fitting to regrease. It is nice to be able to easily lube the screw. Most jacks only have a way to get to the top gear for greasing. I did note the jack mount position places the tongue height a little tall if you have a low vehicle or hitch. Luckily I moved to a truck and now it's works nice. However, would be nice to have ability to adjust height of the jack. I think Fulton is the only one that offers that, but the jack was not heavy duty enough.




by:

Review from a similar DLx in Trailer Jack


As described. Was looking for something heavy duty and this worked!




by:

Review from a similar DLx in Trailer Jack


I was originally trying to find something that would bolt upto the Shelby welded bracket. I'm so glad I went with this unit instead. It's heavy duty, large wheel for easy maneuvers, greese fittings, easy up like butta! The black color is different and goes well with my red Stingray. The customer service is over the top!




by:

Review from a similar DLx in Trailer Jack


This jack is solid as a rock. Totally recommended. I did remove the wheel and just screwed the bolt back into the bottom of the tube for better clearance coming and going into steep driveways.




by:

Review from a similar DLx in Trailer Jack


I think this trailer jack is the best.




by:

Review from a similar DLx in Trailer Jack


Great service as always, arrived earlier than expected



25
61
Show More Reviews

See what our Experts say about this Dutton-Lainson Trailer Jack



  • Mounting Hole Dimensions of Dutton Lainson Sidewind Jack # DL22339
    I attached a picture that has the measurements of the mounting holes on the mounting plate of the Dutton Lainson Sidewind jack # DL22339 that you referenced. Basically they are 5-1/2 inches from left to right and then 2-3/8 top to bottom row and then an additional inch for each of the others.
    view full answer...
    Image 1 for
  • Fit of Dutton-Lainson DL22339 Trailer Jack on a Ranger Trail Boat Trailer
    The Dutton-Lainson # DL22339 Square Tube Swivel Jack isn't a trailer-specific part. It'll fit the frame member of your 2013 Ranger Trail boat trailer if the frame member is between 3 and 5 inches in height. I've linked you to a product demonstration video featuring the # DL22339 jack. The jack has a 1700 lb capacity, and the 8 inch caster wheel makes it easy to maneuver the trailer around when needed. The jack also features a grease zerk, which is a nice feature that isn't found an all...
    view full answer...
  • Can Wheel Be Added To Fulton XLT Powered Drive Trailer Jack F141401?
    I may have a different option for you, but there is not a wheel kit available for the Fulton XLT Powered Driver Trailer Jack # F141401 you were looking at. The above jack is the only powered side mount jack offered but since no wheel is available you will need to decide on if you want a wheel or the power jack. If you decide having a wheel is more important I recommend the Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 due to it having the...
    view full answer...
  • Jack With Wheel Compatible with 500 Gallon Water Tank Trailer
    For your trailer, the best option for a wheel is the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This is rated for up to 5,000 lb trailer with 500 lb tongue weight. This is due to the pneumatic dual tires. Most trailer jacks with wheel are only rated for about a 1600 lb capacity maximum due mostly to the plastic wheel. The Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 is the most heavy duty option we offer other than the...
    view full answer...
  • US Made Swivel Side Mount Trailer Jack
    The etrailer brand # TJP-2002S-B is manufactured in China. We do offer some side mount trailer jacks from Dutton-Lainson that are manufactured in the USA. They don't offer a pipe mount jack, but they do offer a swivel pin mounted jack which would be much more stable. I'd recommend the part # DL22339 1700 lb capacity bolt-on jack. The jack also provides a caster to make maneuvering your trailer around while its being stored much easier. The jack is compatible with frame members that are...
    view full answer...
  • Are There Any American Made Trailer Tongue Jacks Available?
    We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
    view full answer...
  • Can the Bulldog Round, Weld-On Jack's Foot be Swapped with a Wheel
    We do have jacks that have a wheel instead of a foot. However, the Bulldog Round, part # BD151159, does not have the capability to swap the foot for a wheel. In fact, none of our jacks with drop-down feet can be swapped for wheels. Instead, you would have to use one that already has a wheel attached. Of course, those with the wheel have lower weight capacities and make use of a hand crank rather than electricity like the Bulldog Round. If that's the route you would like to take, I recommend...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video by:
Chris R
Employee Matthew S
Written by:
Matthew S
Employee Jacob H
Installed by:
Jacob H
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830