bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. No Drop Leg
Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs

Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs

Item # F141133
lowest price pledge
Retail:$288.45
Our Price: $172.97
You Save: $115.48
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant swivel jack is great for marine use. Bracket height is 29" when extended, 17" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware. Lowest Prices for the best trailer jack from Fulton. Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs part number F141133 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (216)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fulton Trailer Jack - F141133

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 12 Inch Lift
  • With Wheel
  • Fulton

Corrosion-resistant swivel jack is great for marine use. Bracket height is 29" when extended, 17" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.


Features:

  • Marine-grade swivel jack lets you raise and lower your trailer
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Self-healing Sharkskin finish offers a 1,200-hour salt spray rating on exterior jack surfaces
    • Ideal for use on a boat or snowmobile trailer
    • Durable enough for saltwater applications
  • Clear ZMax finish offers a 600-hour salt spray rating on internal components
  • Acme screw raises and lowers the jack quickly and easily, traveling 1" for every 5 turns
  • 360-Degree caster allows easy wheel movement in all directions
  • Bushing helps eliminate rattling of tubes by ensuring that the inner tube fits snuggly in the outer tube
  • Soft, ergonomic grip on sidewind handle makes it easy to crank jack
    • Handle catch helps keep handle from swinging when jack is stowed
  • Heavy-gauge steel construction
  • 3 Grease fittings make lubrication easy
  • Bolt-on mounting with included hardware


Specs:

  • Mounting: 3" x 3" and 3" x 4" trailer frames
  • Bracket height:
    • 17" Retracted
    • 29" Extended
  • Lift:12"
  • Lift capacity: 1,500 lbs
  • Wheel dimensions: 8" diameter x 2" wide
  • Pull pin diameter: 1/2"
  • 5-Year limited warranty


Corrosion Resistance for Marine Use

This jack is coated to resist corrosion, making it ideal for your boat or snowmobile trailer. The tubes and wheel assembly are coated in Fulton's Sharkskin finish. Sharkskin products undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 1,200 hours of constant exposure to the saltwater mist. This 1,200-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater. Sharkskin finish is also self-healing, meaning that it minimizes the effects of any scratches that may occur. As a result, this jack will retain its like-new appearance for longer.


In addition, the jack's acme screw, wheel assembly lock nut, and grease fittings all have Fulton's ZMax finish. This clear zinc coating offers a 600-hour salt spray rating, which is also great for marine use.

Dimensions

How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



141133 Fulton XLT Bolt-Thru Swing-Away Marine Trailer Jack - 12" Lift - Single Wheel - True Turn 360 Castering System - Side Wind - Bolt-On - 1,500 lbs

Replaces #s 61271, 63115




California residents: click here



Customer Reviews

Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs - F141133

Average Customer Rating:  4.8 out of 5 stars   (216 Customer Reviews)

Corrosion-resistant swivel jack is great for marine use. Bracket height is 29" when extended, 17" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.

- F141133
by:

Upgrade from my old trailer jack, like that it has 3 three grease fittings, a sturdier wheel and lifts the boat easily.


Comments
Still going strong, easy to use when raising the boat, no rust noted on a salt water trailer, would buy another tomorrow if needed.
Mike - 07/11/2022


- F141133
by:

I like the jack. As description says, many great features. But contrary to the corrosion description, this will deteriorate faster than expected due to rust. Jack never in water - just exposed to normal Florida rainfall. Bottom of stand above wheel started rusting first month. Same with wheel nut and holder (see pics). I've wire brushed the bottom 2 times in a year to keep rust off, and covered it with grease to "protect" it. No excuse for rust-able parts on water service equipment. Could be considered expensive for that reason. BTW - Jack only in service 7 months, not a year, which is when they send out these reviews.



- F141133
by:

This is a quality jack. Very Happy with it. We received the 1st jack and the box was all torn up. Call customer service and was treated excellent. The 2nd jack came much stronger box. With no problems. Wonderful company to work with.


Comments
wonderful
Steve - 07/12/2022


- F141133
by:

Very nice jack. Bolted right on easy. Looks good. Recommend this for your upgrade.



- F141133
by:

Cadillac of trailer jacks, Got the 8" poly wheel. Excellent fit & finish, w/fast shipping A+.


Comments
Fantastic no issues !
BK - 11/16/2018



- F141133
by: 03/25/2021

I practically need a can opener to get my boat inside my garage, having this Fulton jack is a game changer when it comes to manipulating my Lund into the garage!



- F141133
by:

This jack is solid. The best part of it is that the wheel spins freely which makes it easier to move around and position it in my garage. Many of the other jacks don't. If there is one small complaint, it would be that the plastic holder that keeps the arm from falling down while being towed (when the jack is horizontal) does not hold all the time. It needs to be a little larger and grip the pole better. But overall very happy with the product.



- F141133
by:

Great product. It is heavy duty and holds up well in camping situations.


Comments
Still working great. It really helps moving my travel trailer around.
Doug - 05/13/2022


- F141133
by:

I installed the trailer jack about one year ago. I loved its durability and the extended height. Would highly recommend



- F141133
by:

This is an very nice jack. I replaced the original standard jack on my 4yr. old 16FT Magic-Tilt trailer. The handle had almost rusted through and it was a bear to crank. This works so smooth and easy. The finish looks great! Only time will tell how it holds up to the St. John's River, Mayport, and everyday outside. Very easy to install. Just hook up and remove the old one. Then bolt it on.



- F141133
by:

This jack was an excellent replacement for my factory jack on my 21' Ranger 520VX tandem trailer. The jack provides extra height for taller trucks and does NOT require a chock under the wheel in order to reach the bumper height, as my original jack did. After 1 year, this jack still functions as well as it did the first day installed. I can turn the jack with 1 finger--very easy and fast. I highly recommend this jack!!


Comments
After 1 year, still works awesome! No maintenance and still works like new. This is a quality jack replacement and functions great! Definitely better than the original jack that came with my RangerTrail.
Walker M - 06/21/2017



- F141133
by:

I ordered this product to replace an older cheaper Fulton model as I launch my boat at primative salt water ramps and I wanted the extra protection of this jack's coating. The salt water took a toll on my older jack, but that is partially due to the end cap coming off over time and water getting into the inside of the jack. This jack is very beefy and appears to be made very well. The larger wheel is great for me since I push my skiff into the garage by hand and the added size of the wheel helps. All the seals are tight, it just oozes quality, and it cranks so easy you can do it with one finger. I would purchase this product again and I felt that the folks at etrailer were top notch without a doubt. Worth the extra few bucks over the cheaper models!


Comments
Hello Dwayne do you have any trouble with the wheel not turning left or right when turning. Mine I have to kick when I turn thx. In advance
-- comment by: John - 01/04/2015

I have spoken with my contacts at Fulton, and this # F141133 trailer jack has their best caster and wheel combinations currently available on it, and it is designed to be highly maneuverable. It is suggested to reduce the possibility of bending or shearing the outer tube or inner tube of the jack that while maneuvering the trailer make sure that you have the jack at the lowest possible setting. This may effect the tongue weight that the loaded trailer will exert on your trailer jack, so make sure that you are within the lift capacity of this jack.

-- Etrailer Expert Rachael H - 1/7/2015


- F141133
by:

The Fulton XLT after one year is still the best marine jack I have ever used. The multiple grease points and solid HD construction make for a jack that should last a lifetime for me. I store my trailer indoors when not in use, so my mileage may vary compared to others.


Comments
Now 2 years later its still looks and works like new, the big wheel and sturdy construction have made moving the trailer and boat around a one person job.
Hport_7 - 04/21/2020


- F141133
by:

I ordered this jack for my Dorsey boat trailer and it fits just perfectly. The product is very well built and made to last. A few bolts and it’s all assembled ready to be installed. Very happy with this jack.



- F141133
by:

Great product, this one replaces my 10 year old Fulton jack. It has been but threw a lot.


Comments
Great swivel jack, no problems with it still works great!!!!!
James W - 10/04/2021


- F141133
by:

The look and feel of the jack instills confidence that it will last a long time.Haven't used it yet, as my trailer is getting refurbished. Like the zirc fittings for greasing internal components. Delivery was very quick and arrived before the scheduled date.



- F141133
by:

I only wish I had bought this sooner. Great product!



- F141133
by:

This swivel jack was a little overkill for my 1800 lb. boat on a single axle trailer, which I knew going in. I was able to install it in just minutes with a very simple set up. I'm replacing an older swivel jack that has a smaller wheel and deflected side-to-side significantly. So far, there's a significant improvement in stability compared to my older jack. I haven't used the 8" wheel and swivel caster yet but for the tongue weight of my trailer, it should be just fine.



- F141133
by:

The Fulton XLT F141133 is a very heavy duty jack. More than needed for my application, but the quality is there. The high lift height is nice. This jack is built like a tank, and should last a long time. Only complaint is the handle stop, that keeps the handle tucked neatly when jack is turned up. Seems a little loose because it is too far from the body of the jack. We will see if it actually holds the handle up. Otherwise this is a great jack. Only wish Fulton would make a little lighter duty with the same quality.


Comments
The jack is still working perfectly. I originally thought this jack would be overkill for my application, but the strength of the jack makes it very easy to use. Everything about this jack is amazing, and I especially like the speed of the jack. The little plastic stop for the handle so it doesnt swing when turned up seems like an afterthought of Fulton, because it doesnt always hold, but that is a very minor problem. Etrailer was great with pricing, and customer service, and Fulton is something I would not hesitate to buy again. Well worth the higher price compared to other jacks.
Zach S - 07/29/2015



- F141133
by:

Replaced an OEM trailer jack with this heavier duty model for an 18 ft boat. Easy to install-4 nuts and bolts off and new jack goes on with 4 more new nuts and bolts. Much beefier, sturdy jack, tire is much bigger than previous, makes for handling the boat easier and safer.



- F141133
by:

Super happy with this jack. Very smooth and has a grease zerk for lubrication. I use it on a salt water boat trailer and after one year it is still rust free. Would buy another one tomorrow.



- F141133
by:

Well made and works just fine.



- F141133
by:

Very well built trailer jack. I replaced a failed 1200lb jack with this 1500lb jack on my Tritoon boat trailer.The installation was quick. It used the same mount as the old jack. This is the size of jack that should have come on my boat trailer from the factory.


Comments
It works great. We have a big boat. This jack handles the heavy trailer very well.
Mitch S - 09/14/2018



- F141133
by:

My trailer jack is a year old and it has performed terrifically!



- F141133
by:

Amy E. Is a fantastic rep for Etrailer.Nashe found my part when i could not. Thanks Amy


28
225
Show More Reviews

See what our Experts say about this Fulton Trailer Jack



  • Mounting Hole Dimensions for the Fulton XLT Trailer Jack # F141133
    I went out into our warehouse and pulled a Fulton XLT Jack to measure the mounting hole dimensions for you. From left to right the holes are 5-1/2 inches apart, from the very top holes to the very bottom holes the distance is 4-1/2 inches, the center set of holes are 2-1/2 inches apart and then the top two and bottom two holes are 1 inch apart.
    view full answer...
  • Compatibility of Fulton # F141133 XLT Trailer Jack with 3 x 2 Inch Trailer Frame
    According to Fulton, their XLT Bolt On Swivel Trailer Jack # F141133 is compatible with a 3 x 2 inch trailer frame.
    view full answer...
  • Do the Fulton XLT Jacks Require Grease Upon Install
    The Fulton XLT Swivel Trailer Jack # F141133 that you referenced comes ready to be installed and used. It would not require any greasing prior to initial use.
    view full answer...
  • Can Fulton XLT Trailer Jack # F141133 Fit 2 inch Trailer Frame
    The Fulton XLT jack # F141133 that you referenced can fit frames that are 2 inches wide. 3 inch tall by 2 inch wide would be fine for this jack.
    view full answer...
  • Quality of the Handle and Rust Protection for the Fulton XLT Jack 141133
    I reached out to my contact at Fulton about the handle issue you mentioned for the XLT Trailer Jack # F141133. He said that the handle is steel and has a plastic coating so it will hold up and that the reason customers are seeing it fall off is unintentional misuse. The most common reason the handle on a jack like this will fall off is that the customer was using the handle to move the trailer. The handle was only designed to crank the gears inside the jack and isn't rated to pull a trailer. I...
    view full answer...
  • Swivel Jack with Wheel Recommendation for Haulmark Transport Cargo Trailer
    The Fulton XLT Swivel Trailer Jack part # F141133 that you referenced would be a great solution for what you are looking for. It has a larger caster wheel which makes rolling the trailer around easier and can swivel up when not in use to get out of the way and not cause ground clearance issues.
    view full answer...
  • What Is The Wheel Of The Fulton XLT # F141133 Made Of?
    The Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # F141133 has a wheel that is made of Polypropylene according to my contact at Fulton. This is a very nice jack that is extremely durable. The 360-degree caster allows easy wheel movement in all directions that is refreshing if you are used to the traditional caster wheel. It has a clear ZMax finish that has a 600-hour salt spray rating on the internal components and a 1,200 hour salt spray rating...
    view full answer...
  • Recommended Trailer Jack for Easier Maneuverability on Boat Trailer
    For your particular application, going with a single 8 inch wheel like what is on the Fulton XLT Bolt-Thru Swivel Trailer Jack # F141133 is going to be the better option. A dual wheel jack can be more beneficial on surfaces other than pavement, as a single wheel tends to dig more into softer surfaces like dirt or gravel. However, in terms of pure maneurverability on pavement like what you are needing, a dual wheel might actually make things more difficult, as they will provide more surface...
    view full answer...
  • Does Fulton XLT Bolt-Thru Swivel Trailer Jack # F141133 Come Pre-Greased
    The Fulton XLT Bolt-Thru Swivel Trailer Jack # F141133 comes pre-greased so you would not need to grease it before using it the first time. You might grease the jack a couple times a year with those fittings, but the jack does not come with a strict grease schedule.
    view full answer...
  • Replacement Bolt-on Swivel Trailer Jack Rated Higher than 1,200 Pounds
    We do not have any bolt-on swivel jacks rated for 2,000 pounds that have a 20 inch lift. But I have an option that may work for you. The Fulton XLT # F141133 has a capacity of 1,500 pounds an 12 inches of lift. The bolt holes measure 4-1/2 inches like on your current jack. The 1,500 pounds is more than you have so it will do the job although I'm not sure if you can get by with losing 5 inches of lift. I've attached a review video on the Fulton XLT for you.
    view full answer...
  • Recommended Bolt-On Jack For Boat Trailer
    The trailer jacks we offer for a tongue trailer are all manually operated. We do not have any electric bolt-on jacks available. For a bolt-on trailer jack I recommend a jack like the Fulton XLT Bolt-Thru Swivel Trailer Jack, part # F141133. This is a 1,500-lb jack that bolts to a trailer frame that measures 3 x 3 or 3 x 4 inches. The jack swivels up to stow it parallel to the trailer frame for travel.
    view full answer...
  • Troubleshooting Wheel Bolts Coming Loose on Fulton XLT Trailer Jack
    I reached out to my contact at Fulton regarding the problems you're having with the two screws holding the caster for the Fulton XLT Trailer Jack # F141133 in place. He said he has not seen this before but it's definitely not normal. He said the two screws should be 1/4-28 and snug fit to the threaded holes on the jack. There isn't a particular torque spec that needs to be used but they should be tightened until snug. If the screws continue to back out like this my contact said it might...
    view full answer...
  • Where to Mount Bolt On Fulton Trailer Jack on Boat Trailer
    Placing the Fulton XLT 1500 jack part # F141133 on your trailer frame really depends on where it works the best for your application. Normally right behind the coupler of the trailer is a good spot but you have to consider clearance for the jack handle and for the jack when it's swiveled up.
    view full answer...
    Image 1 for
  • Can the Fulton XLT Bolt-Thru Swivel Trailer Jack Be Used With U-Bolts
    The Fulton XLT Bolt-Thru Swivel Trailer Jack part # F141133 could be used with a u-bolt to install that would not be a problem. However, the u-bolt you need I can imagine won't be easy to find which is why the included hardware will be a much easier solution but, if you do find one that will then I don't see a problem. I have actually tired a few u-bolts with a similar jack myself but was not able to find a match because the hole size usually didn't match up to the width needed.
    view full answer...
  • Is There a Way to Attach a Bolt On Jack to a Round Tube Trailer Frame
    You won't be able to bolt a jack to a round tube so best option would be to weld a square section to the round tube and which will then allow a bolt on jack like the # F141133 to attach. Without the square edge for the u-bolts to attach to the jack would just spin on the tube.
    view full answer...
  • Left to Right Hole Dimensions of Fulton XLT Bolt-Thru Swivel Trailer Jack
    The mounting holes on the Fulton XLT Bolt-Thru Swivel Trailer Jack part # F141133 are spaced 5-1/2" apart left to right as you can see in the attached photo.
    view full answer...
    Image 1 for
  • How to Determine Replacement Trailer Jack for Tandem Axle Diamond City Steel Boat Trailer
    Based on the weight of your boat and the fact that you're in saltwater occasionally the Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # F141133 would be a good choice. There are a few things to consider when you are looking for a trailer jack. One is your tongue weight, which is typically 10-15% of your loaded trailer weight. With a lift capacity of 1,500 lbs you won't have anything to worry about. The other thing to consider is your trailer tongue...
    view full answer...
  • Trailer Frame Fit and Retracted Heights For Fulton F2 and Fulton XLT Trailer Jacks
    I spoke with my contact at Fulton and he confirmed that both the Fulton XLT # F141133 and the F2 Swing-Up # F1413040134 will fit your trailer frame that measures 3 inches x 1-1/2 inches. Typically bracket height is measured from the bottom of the wheel to the center of the bracket. I was able to determine the height from the bottom of the wheel to the bottom of the bracket using the bracket dimensions. For the XLT # F141133, to the center of the bracket measures 15 inches when retracted....
    view full answer...
    Image 1 for Image 2 for
  • Diameter of Replacement Pull Pin for Fulton XLT Swivel Trailer Jacks # F500365
    The diameter of the Replacement Pull Pin for Fulton XLT Swivel Trailer Jacks # F500365 is 1/2 inch. This is designed to fit the Fulton XLT trailer jack part # F141133.
    view full answer...
  • Fulton Trailer Jack Recommendation with Removable Wheel
    For a very similar Fulton jack that has a removable wheel we have the Fulton F2 part # F1413140334.. The wheel of the XLT that you mentioned though is not replaceable.
    view full answer...
  • Mounting the Fulton F2 Trailer Jack
    Thanks for the photo. The Fulton F2 jacks use a different mount so it isn't compatible with your current base. You will need to remove the base and then you can install the F2 # F1413020134 you referenced. This F2 will come with all new mounting hardware. If you want to keep your current mount, then I recommend the Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # F141133 which is the closest compatible option.
    view full answer...
    Image 1 for
  • Recommended Hand Crank Trailer Winch and Jack for 6K Boat
    The general rule we use for selecting a boat trailer winch is 2:1 which means for a 6,000 lb boat we'd recommend a 3,000 lb winch. The Fulton 2-Speed Trailer Winch part # F142424 is a great option for this rated at 3,200 lbs. It comes with a strap and clevis hook as well, pre-installed. It also has a two speed operation, one for speed and one for power. You'd simply un-bolt the the old winch, drill a few holes for the new pattern, then bolt the new one in place. In regards to a new jack,...
    view full answer...
  • Replacement Jack for Boat Trailer With Wheel That Swivels Easily
    We have a great option for a boat trailer jack that is going to easily swivel with the Fulton XLT jack. Keeping in mind that all jack wheels can struggle turning if there is too much weight on them, the XLT has a very high-quality caster and wheel and is designed with easy maneuverability in mind. The jack has what is called a "Sharkskin" finish as well to keep it from getting scratched and damaged, and is designed to fit 3" x 3" or 3" x 4" trailer frames. It comes in either silver or...
    view full answer...
    Image 1 for
  • Bolt-On Swivel Trailer Jack with Less than 11 Inches from Top of Jack to Center of Mounting Bracket
    On the Fulton XLT Swivel Trailer Jack # F141133 it does measure approximately 16 inches from the center of the mount to the top of the jack. The Fulton F2 jack # F1413040134 is a better option and what I recommend for 3x3 or 3x4 trailer frames. The mount itself is adjustable up and down along the outer tube of the jack so you can be sure that the top will not interfere with anything. I have linked a video review of this jack for you. For 4 or 5 inch tall trailer frames I recommend #...
    view full answer...


< Previous



Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Adele M
Updated by:
Adele M
Employee Lisa S
Updated by:
Lisa S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.