Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (191 Customer Reviews)
Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.This is a very solid jack. I bolted sideways to my 3x5" frame. Tip, drill and tap the first hole and mount the jack, then mark the other three holes, remove the jack and drill and tap the others. I have done that with many things and it always works out.
We mounted a platform on the wench side so I needed to mount the jack on the other side. I typically like the jack and wench on the same side as the drivers door.
This is on a 1988 268 SeaRay Sundancer, so not a small boat. The old trailer wench stand was tubs and bolts and I wanted to clean it up, and now this jack finishes it off to make the whole thing look great.
Very happy. Longevity will be the test of quality, but it is very heavy and seems very tough.
Super fast shipping as I needed an emergency replacement of the failed jack. Easy swap as I could reuse the hardware from older jack. Otherwise if one cannot use the provided brackets iftrailer tongue is too tall, one needs to order the hardware kit/bolts!
Swapped this on my Mastercraft SA-214 single axle trailer for my X14. Was a direct bold on replacement for the dual wheeled 1600lb version, but I like the single wheel better
Excellent so far. I bought this to replace the lower quality wheel jack that had been included on my aluma cargo trailer. The jack they included was OK for occasional use but had a small wheel and seas to really up to regular usage. My aluma trailer has been turned in to a custom home build travel trailer so the jack is getting a great deal of use in moving the trailer around while loaded. The tongue load on the trailer is around 350# so this jack is very much overkill. But I wanted the large wide wheel as ocasionally a travel trailer has to get moved in packed dirt or gravel.
I must say this jack is a wonderful upgrade. While expensive it has all the features I wanted. The wheel does not spin around while easing or lowering so you don't have to hold it with your foot. And the bracket is adjustable. You can loosen the tube on the pivot bracket and slide the jack adjusting the resting height and fully extended height. I set mine at the lowest point as I often was finding with my other jack that while camping I would have to dig a hole to get the jack folded down. So this one is 2 inches shorter at the lowest setting which should allow it to be deployed in more situations while camping where the tongue actually needs to be lower than the axle to level the trailer.
It's very well build. The wheel is large and wide. The jack feels very solid. The U-bolts made installation easy, although I added some steel pieces under the uboots to enlarge their contact area. The jack deploys easily. It cranks up and down easily.
Only surprise was the description says maintenance free. It is not. Inside the box there is a printed technical bulletin that explains how the acme screw needs to be regularly greased. And you do it through a vent hole which is hard to access. With all the quality they built in it seems like they would have taken the time to drill one more hole and install a grease fitting. I'll install one at some point. Greasing through the vent hole is a pain. You have to work the grease in with your pinky finger or something small.
But overall it's a wonderful upgrade. Add a grease fitting and it would be perfect.
Ordered to replace the one that I had on a boat trailer.
It fit the trailer perfectly. There wasn't any difference between the original jack just different part number. Thanks for your help.
This a heavy duty trailer jack. Easily attached to the trailer. Aluminum construction and a lock for the wheel.
Very good product. It was easy to install but the u-bolts had to be cut off to fit my 2” thick boat frame. Don’t make the mistake I did by ordering the 12” lift jack. The handle would not clear the boat keeping me from raising and lowering the jack.
Adjustable set up sold me. My driveway has a down slope. My truck is partially in street which has a slope which puts ball mount much lower then run height. I couldn’t swing old Jack up. This adjustable sliding mount is amazing. Heavy duty. Overkill for my boat well worth it. Mine was missing the wheel lock so I called E Trailer and they are sending me one.
The F2 is an excellent trailer jack that I installed on a new CC boat trailer as the stock jack failed prematurely. My last two bass boats also required upgraded jacks. The Fulton replacements never require further attention. This unit is far easier to turn the jack handle, impressive hardware is included to quickly install, and absolutely worth the investment. Spend time fishing not fixing!
Installed the jack with ease using the instructional video on e-trailers website. Very fast shipping at a reasonable price. This jack is a beast and makes all others look wimpy is a major upgrade from the 1000 lb. jack that was on my aluminum boat trailer the wide wheel also makes it easy to maneuver. Thanks
The Fulton trailer jack I bought from etrailer is excellent. Got it installed on my home built travel trailer tonight. I love how the wheel does not spin when it's raised and lowered. And the 8 inch wheel is so much better for moving the trailer around than the old small narrow wheel was. And I love that the jack can be adjusted up and down on the bracket. Often when camping I would have to dig a hole under my old jack to get it vertical. This jack is 2 inches shorter at the lowest setting so this should no longer be a problem.
Overall this is an excellent Jack. Overkill for my small Rack n Roll Kayak Trailer. Box had a huge gash in it but contents were fine. Instructions were very detailed. I am a little disappointed that the Jack did not have a handle keeper on the main tube for some reason. Had to trim the U-bolts because the tube on the Kayak trailer is only 2"x2", but no big deal. Overall this jack is killer. I attached 4 photos of the install.
I gave your jack to my husband for Christmas. Here is a picture of it on his iceboat trailer. He has been very pleased with your product.
I am also attaching a picture of his ice boat.
This is an AWESOME trailer jack. Unfortunately, I had to return because it was just too big for my utility trailer. I should have done more reading prior to ordering. It was missing the brake attachment but I have no doubt etrailer would have got me a replacement out quickly. I dealt with James R and he got me taken care of.
Great company, will order all my parts here.
Very poor design— bought this items because you can adjust the mounting bracket along the jack — the mounting bracket covers the bolt that needs to be loosened — I work on it ONE HOUR still not loosened — a regular socket wrench won’t fit —- just terrible—- a few people need to be fired for allowing this design ( now concerned about the overall quality if a basic design can’t be done right )
It works great.
The product is heavy duty and the large wheel makes it easy to move my boat around my barn. T h e wheel lock was missing but I called etrailer and they are sending a replacement.
Great trailer jack only problem was the ubolts were too long and I had to cut them so the jack would swivel up
It is robust, simple to assemble and install. The larger wheel will allow me to move the trailer more easily on grass or gravel.
The Fulton F 2 is a beast. Got it installed today on my Blackjack 225 . Very solid heavy duty and smooth operation. Of course the saltwater will be the real test. But it is sealed and should be good. E trailer got it delivered when they said and followed up with email updates as we had to wait for manufacturer to ship. But I didn’t have to guess or chase them.
Replaced Trailer Jack on my FLOE snowmobile trailer. Two of the mounting holes lined up perfectly and I drilled and tapped the other two. Very easy installation. The trailer Jack operates very smoothly, of course it is new. I'm hoping after a couple Minnesota winters it stays smooth. The large, wide wheel rolls great on pavement and even allows me to move the tongue on gravel. It makes hitch alignment easier. I liked this one so much I just ordered another for my boat trailer. Thanks etrailer. Great service and delivery on the first one.
Al B.
9/18/2015
After a winter season where it was exposed to 2000 miles of slush and snow on northeastern Minnesota roads the jack is still operating as smoothly as the day it was installed.
Service and advice was excellent
Do you have a question about this Trailer Jack?
Condition: Badly Dinged
Notes: Piece that holds handle in place broken off of handle
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tyler M.
2/20/2020
I went out to our warehouse to look into this jack personally. In order to reach the bolt, you have to rotate the mounting plate 180 degrees by pulling on the pull pin. The pull pin will auto-lock every 90 degrees. Once the mounting place is rotated, so that the U shaped cutout lines up with the bolt, you will be able to access the bolt. You will also want a socket extension with a 3/4 inch socket in order to loosen the bolt.