bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. No Drop Leg
Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black

Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black

Item # F26ZR
lowest price pledge
Retail:$317.29
Our Price: $228.39
You Save: $88.90
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Swivel jack is designed for use with marine and utility trailers. Bracket height is 25" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware. Lowest Prices for the best trailer jack from Fulton. Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black part number F26ZR can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (219)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fulton Trailer Jack - F26ZR

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • Fulton

Swivel jack is designed for use with marine and utility trailers. Bracket height is 25" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.


Features:

  • Marine-grade swivel jack lets you raise and lower your trailer
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Acme screw raises and lowers the jack quickly and easily, traveling 1" for every 5 turns
  • TruTurn 360-degree caster allows easy wheel movement in all directions
  • Bushing helps eliminate rattling of tubes by ensuring that the inner tube fits snuggly in the outer tube
  • Soft, ergonomic grip on sidewind handle makes it easy to crank jack
    • Handle catch helps keep handle from swinging when jack is stowed
  • Heavy-gauge steel construction
  • Grease fittings make lubrication easy
  • Bolt-on mounting with included hardware
  • Matte black color


Specs:

  • Mounting: 3" x 3" and 3" x 4" trailer frames
  • Bracket height:
    • 15" Retracted
    • 25" Extended
  • Lift: 10"
  • Lift capacity: 1,500 lbs
  • Wheel dimensions: 8" diameter x 2" wide
  • Pull pin diameter: 1/2"
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



141160 Fulton Swing Up True Turn 360 Trailer Jack - 8" Single Wheel - Sidewind - Bolt On - 1.5K






Customer Reviews

Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black - F26ZR

Average Customer Rating:  4.8 out of 5 stars   (219 Customer Reviews)

Swivel jack is designed for use with marine and utility trailers. Bracket height is 25" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.

by:

Very happy with my new Fulton trailer jack, and winch. Installation was easy enough I was able to do it myself. The only thing I had to get my husband to do was cut a aluminum plate to cover the hole where the old jack was.
Shipping was really fast too.




by:

Great service top quality products!




by:

Very nice, easy assembly. Good hardware, etc.




by:

I like this tongue Jack. It was easy to install, looks great on my black trailer and it is far sturdier than the one that came with the trailer. I have several Fulton products and highly recommend there products.




by:

Excellent product in the way it performs and locks I would definitely recommend it to my friends that have boats




by:

Very high quality product. I'm most impressed, though, with the customer service and communication. Excellent!!!




by:

Tyra was very helpful! Thank You. We will do more business in the future




by:

Delivered Quickly as promised, no issues. Easy transaction!


Comments
No issues after one year. Cranks smoothly and the larger wheel makes moving the front of the boat easier.
RICHARD E - 08/30/2021


by:

Well built and holding up well.




by:

Upgraded my boat trailer jack to the Fulton XLT. Huge improvement over my prior Fulton 1200# jack. Improved ease of cranking makes all the difference in the world.




by:

Fast delivery. Great product




by:




by:




by:




by:




by:




by:




by:




by:

Exactly as described. Thanks




by:




by:




by:




by:

Review from a similar XLT Jack in Trailer Jack


I have used Fulton before so I knew how good their products are. What really impressed me was the excellent customer service. I have purchased from a lot of companies but never have I seen such detail by your company.They give you names of who took the order, who processed the order and who
packaged the order. I was very happy from start to finish. Thanks to your whole company! This is rare so keep doing the good work.


Comments
Still working great!
Jonny E - 09/25/2021


by:

Review from a similar XLT Jack in Trailer Jack


Upgrade from my old trailer jack, like that it has 3 three grease fittings, a sturdier wheel and lifts the boat easily.


Comments
Still going strong, easy to use when raising the boat, no rust noted on a salt water trailer, would buy another tomorrow if needed.
Mike - 07/11/2022


by:

Review from a similar XLT Jack in Trailer Jack


I like the jack. As description says, many great features. But contrary to the corrosion description, this will deteriorate faster than expected due to rust. Jack never in water - just exposed to normal Florida rainfall. Bottom of stand above wheel started rusting first month. Same with wheel nut and holder (see pics). I've wire brushed the bottom 2 times in a year to keep rust off, and covered it with grease to "protect" it. No excuse for rust-able parts on water service equipment. Could be considered expensive for that reason. BTW - Jack only in service 7 months, not a year, which is when they send out these reviews.



25
219
Show More Reviews

See what our Experts say about this Fulton Trailer Jack



  • Distance from Mounting Plate to Jack Tube on Fulton XLT Trailer Jack F26ZR
    In regards to the Fulton XLT Bolt-Thru Swivel Trailer Jack part # F26ZR, the distance from the center of the mounting bracket to the top of the jack tube cap is 13.4". I have attached a photo below as well to show this. I spoke to Fulton and this is the only measurement they were able to provide in reference to the jack tube height.
    view full answer...
    Image 1 for
  • Replacement Jack For Shelby Model 5850 GF Swivel Jack
    We do not have a replacement gear for your Shelby Model 5850GF swivel jack, unfortunately, so you'd need a replacement jack instead. The Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR is a bolt on swivel jack designed for utility and marine trailers that have a frame measuring 3"x3", or 3"x4" . This jack also has a lift capacity of 1,500lbs, and measures 15" retracted and 25" extended.
    view full answer...
  • Can Fulton Trailer Jack - F26ZR fit a 1.5 x 4 Trailer Frame
    If you used a 1.5 inch spacer to make your 1.5 inch wide frame 3 inches wide you could use the Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR.
    view full answer...
  • Is Fulton XLT Trailer Jack F26ZR A Bolt On or Bolt Through Jack
    The Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR comes with brackets that would allow you to attach to the trailer frame that bolt around the frame but if you wanted to drill holes in the trailer frame and attach it through the frame you could do that as well.
    view full answer...
  • Replacement Jack for Boat Trailer With Wheel That Swivels Easily
    We have a great option for a boat trailer jack that is going to easily swivel with the Fulton XLT jack. Keeping in mind that all jack wheels can struggle turning if there is too much weight on them, the XLT has a very high-quality caster and wheel and is designed with easy maneuverability in mind. The jack has what is called a "Sharkskin" finish as well to keep it from getting scratched and damaged, and is designed to fit 3" x 3" or 3" x 4" trailer frames. It comes in either silver or...
    view full answer...
    Image 1 for
  • Replacement Fulton Jack Option
    If you are not wanting a bolt-on jack such as the Fulton XLT Bolt-Thru Swivel Trailer Jack, # F26ZR we have the Fulton F2 Adjustable A-Frame Jack, # F1413250334. The F2 Series jack is specially designed for use with Fulton's F2 A-frame coupler. If this is not the model you currently have, let us know that we can make suggestion of best option for replacing the model you currently have.
    view full answer...
  • Can the Mounting Height of the Dutton-Lainson Square Swivel Jack Be Adjusted
    The bolt-on frame bracket for the Dutton-Lainson Square Swivel Jack part # DL22340 is welded to the outer tube so no, it cannot be adjusted. I think a better option would be the Fulton XLT Bolt-Thru Swivel Trailer Jack part # F26ZR since the bolt-on frame brackets sit lower on the jack tube which provides more ground clearance.
    view full answer...
  • Needing A Fold-Away Coupler For A 3" X 4" Trailer Frame
    The Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs. part # FHDPB340301, is a fold away coupler hinge for a 3" X 4" trailer frame. I have included a product description link and a video installation link below.
    view full answer...
  • Recommended Swivel Trailer Jack with Rubber Tires That Offers 12+ Inches of Lift
    We have several jacks that fit most of the parameters you mentioned, but the challenge was finding one with a rubber tire. The ARK Extreme Off-Road Ratcheting Trailer Jack, part # ORJW1SU would absolutely check all the boxes. It's not an inexpensive choice, but it offers all the features you're looking for. The jack can handle boat/trailer combinations with up to a 770 lb tongue weight, which is plenty for a boat trailer like your Boston Whaler Montauk. The jack provides up to 10 inches...
    view full answer...
  • Weld-On Plate That Is Compatible With Fulton XLT Trailer Jacks
    I went ahead and checked out your Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR, and the Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind # F1413060334, and you actually won't be able to use this mounting bracket with your XLT jack due to the fact that the plate for the F2 jack is different, and will get welded to your trailer. The bolt on Fulton F2 jack attaches to your trailer the same way, with the use of a u-bolt. However, what you could do, is use the: -Jack Mounting...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Installed by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010