bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer Jack
  4. Side Frame Mount Jack
  5. 1001 - 2000 lbs
  6. Sidewind Jack
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs

Item # FXP10W0301
lowest price pledge
Retail:$105.19
Our Price: $70.49
You Save: 33%
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Lowest Prices for the best trailer jack from Fulton. Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs part number FXP10W0301 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (537)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fulton Trailer Jack - FXP10W0301

  • Boat Trailer Jack
  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Weld-On
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • With Wheel
  • Fulton


Features:

  • Ideal for marine and recreational use
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Z-Max 600 zinc finish provides superior corrosion resistance
    • 600-Hour salt spray rating
  • Bolt-Thru mount provides minimum deflection and maximum support
    • 3-D Formed, heavy-gauge steel stampings
    • Proprietary bushing material
  • Heavy-gauge steel construction
  • Weld-on bracket sold separately
  • Torsion axle design
  • Sidewind design
  • Thermoplastic wheel included


Specs:

  • Bracket height:
    • 12-3/4" Retracted
    • 22-3/4" Extended
  • Lift: 10"
  • Clearance: 10-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 6"
  • Lift capacity: 1,200 lbs
  • Limited 5-year warranty

NOTE: If you do not have an existing bracket welded on to the trailer, you will need part number P9012-00 in addition to this part.



XP10W 0301 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,200 lbs

Installation Details FXP10W0301 Installation instructions


California residents: click here



Customer Reviews

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs - FXP10W0301

Average Customer Rating:  4.9 out of 5 stars   (537 Customer Reviews)


- FXP10W0301
by:

Within 10 minutes of opening the product had it bolted on the only thing I had to do was switch out pull pin from old jack could’ve drilled the holes out but decided to Switch the handles and it’s good to go also a better jack than the OEM great customer service super fast shipping



- FXP10W0301
by:

The product was as advertised but the customer service at etrailer is exceptional. The product was delivered in the quick timeframe they said it would be and the order was complete. Thanks etrailer. I’ll be back.



- FXP10W0301
by:

Fulton Trailer Jack arrived on time and fit perfectly.



- FXP10W0301
by:

Got here faster than I thought it would and bolted right on. The only thing that surprised me was that it didn't include the bracket, bolt and bushing for the trailer, so it wouldn't work on a new application as shipped.



- FXP10W0301
by:

It's a direct replacement for my Skeeter bass boat trailer....took just a few minutes to replace...only one nut/washer.


Comments
Year later, still raiseslowers easily!
phil s - 06/23/2021


- FXP10W0301
by:

This jack fit perfect on my year 2000 trailer. Bolted right on and I couldn't be more satisfied. The service at ETRAILER was excellant. Shipping, I got it earlier than expected. I have ordered 3 items from etrailer and they have just been perfect on all the stuff I listed above. I will use etrailer for all my boat trailer needs.



- FXP10W0301
by:

The perfect bolt right on item for my boat trailer very smooth and quick action



- FXP10W0301
by:

I had an older trailer with an equally older Fulton bolt through swivel, weld on, side winding jack. When it needed replacing I searched on the net not believing I could find a replacement to actually fit the original welded receiver unit. I was wrong. Etrailer.com had the exact jack replacement I needed. I ordered on Monday and asked for the three day fast shipping as I required the use of the trailer by the end of the week. Etrailer shipped the product I needed a day earlier in plenty of time. This is not my first order. Etrailer is an excellent company to deal with.


Comments
Lovely
Jerry M - 08/07/2017



- FXP10W0301
by:

Exact perfect fit for my 14 year old trailer - I needed to replace the BOLT THRU jack and after being told by the trailer manufacturer that no replacement existed any longer (BS I thought - correctly ) I looked on etrailer and found an exact match perfect fit. Fast shipping and It works great. Be aware though that one must dig a bit on etrailer's site and look at the product videos and customer pictures and reviews to verify some things like fuller dimensional info ect.



- FXP10W0301
by:

Very simple installation. It was a identical replacement for the one that was on there. My only disappointment is that it was made in China. Otherwise I would of given it 5 stars. The original Fulton was made in the U.S.A.



- FXP10W0301
by:

I used this to replace the Fulton jack on my EZ-Loader trailer that came with a 2006 17' Glastron bowrider. It was a seemless replacement into the existing jack mounting plate on my trailer. On a side note, customer service from etrailer.com was outstanding.


Comments
I have pretty much the same setup. Did you have to drill a larger hole for the release pin like some other people?
-- comment by: adam - 07/01/2014

Comments
It has been a while since I did this install, but I really dont recall having to drill out the hole for the release pin. I believe my previous jack already had the 12 release pin. Your mileage might vary, but this jack was pretty much identical to the jack that came with my trailer.
-- comment by: Steve O - 07/01/2014


- FXP10W0301
by:

Extremely happy with jack I purchased. It was exact replacement on boat trailer and they upgraded my shipping at no extra cost. Great place to do business.


Comments
Great
A. G - 05/12/2015



- FXP10W0301
by:

I have a 2003 Eagle Trailer for my fishing boat that has this center bolt type of Fulton trailer jack. The new version has a 1/4' pull pin so I had to drill a bigger hole on the welded plate on my trailer. Don't forget to drill out BOTH holes, one for the jack in upright position and the one for jack in horizontal trailering down the road position. I like this new trailer jack, it is very solid and the new version has the grease zerk.



- FXP10W0301
by:

Again this product was exactly what I needed but aside from that I have ordered several different items from Etrailer and the customer service is exceptional. I dont know how big of a company they are but they give you a small town feel by keeping you informed on your order and checking to make sure your happy. I'm a huge fan!



- FXP10W0301
by:

Surprise on how fast I received it.



- FXP10W0301
by:

Product was delivered promptly and was as used to replace the same Fulton brand of trailer jack. I did have to drill out the holes for the lock pin on the base welded to the trailer frame because the lock pin on the original equipment was 3/8" in diameter while the replacement jack had a 1/2" lock pin. All is well. Thank you for the prompt service.



- FXP10W0301
by:

Product was A+. Shipping was fast. Anna's customer service was second to none. She knew how important this part was and made sure it was shipped the same day. As a first time etrailer customer, I will definitely keep etrailer in mind for future needs.


Comments
Exact item i needed and wanted. r.
Robby - 05/13/2015



- FXP10W0301
by:

I received my new trailer jack within a couple days after placing the order, and sooner than expected. A replacement for my 15 year old worn and bent jack, the new one bolted right up to my trailer with no issues at all and it works great. I will definately order again from etrailer.



- FXP10W0301
by:

We have had this jack for 1 year. It has worked really well for us.



- FXP10W0301
by:

Perfect replacement for my Fulton jack that came with my boat trailer. Old one came right off new one slipped right on the existing weld on plate and bolt. Tightened up the center nut and works perfectly.



- FXP10W0301
by:

The Fulton Trailer Jack was the perfect replacement to the original jack on our trailer. We haven't had any issues with it over the last year, and seems to be holding up timelessly.



- FXP10W0301
by:

First time user at e-Trailer and am extremely pleased with their selection and ease in ordering. The product was delivered exactly as promised and their follow up for customer satisfaction was prompt and easy to respond to this review site. I'll certainly be ordering from this site again and again.


Comments
Thanks for your follow up. The jack has performed as expected. One suggestion would be to add a small collar to prevent the spring pull rod from becoming misaligned when repositioning the jack. Otherwise it is good. Thank you.
Hugh W - 10/07/2016



- FXP10W0301
by:

Great product. I use this to replace the existing jack on my boat trailer that was the same design. This one was a little more heavier made. I had to make a miner adjustment to the existing welded piece that is on the trailer. (just had to drill the holes out a little for the pull pin to lock in) No Problem. Great Heavy Duty Product.



- FXP10W0301
by:

It was easy to find and purchase online, I received it very quickly, it was exactly what I ordered, it was a perfect fit for the original jack that came on my EZ-Loader trailer, and the price seemed good to me. A very good jack and good shopping experience.



- FXP10W0301
by:

The Fulton jack arrived promptly and was properly packaged. I removed the old jack and installed the new one without an issue. The customer service at eTrailer was excellent!


26
540
Show More Reviews

Ask the Experts about this Fulton Trailer Jack



  • Replacement Trailer Jack for Fulton Magnum Series Jack On Trailer
    As a replacement for your Fulton Magnum Series I recommend checking out the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 which will use the same type of mounting bracket as what you have for an easy install.
    view full answer...
  • How to Remove Fulton Magnum Series Bolt-Thru Trailer Jack
    The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 is held on to the trailer with a center bolt. It is also the pivot bolt. Use a box end wrench or a short wall socket to remove the existing bolt. It has pretty coarse threads and generally they come off pretty easily. If it appears rusty you may want to use a little bit of penetrating oil to make taking it off slightly easier.
    view full answer...
  • Help Identifying Fulton Trailer Jack
    Without more information or a picture of your jack the best recommendation I could make would be to check out the link I attached that has all of the Fulton jacks we carry. You should be able to recognize the one you have by scrolling down the page and checking each one out. It is possible that you have a Fulton Magnum jack as that was a very popular jack that has been now discontinued. If this is the case you would need a new jack and mount.
    view full answer...
  • Fulton Magnum Series Jack Recommendation.
    It looks like the Fulton Trailer Jack # FXP10W0301 that you referenced is the same style of jack you have on your trailer. This is the only jack we offer in that style so it would be the only thing that would potentially work. Still, I would rather you cut that jack off of your trailer and install a new one as installing one in the way you are interested in has never been tested and we are not sure it would work.
    view full answer...
    Image 1 for
  • Can the Fulton 1,200 Pound Bolt-Thru Swivel Marine Jack be Used for a 2,000 Pound Boat and Trailer
    Since the capacity of a jack does not have to hold or lift the entire weight of the trailer and the boat, you will just need to make sure that the trailer when loaded has a tongue weight less than 1,200 pounds. For a 2,000 pound boat plus the weight of the trailer, it is unlikely that the tongue weight would be more than 1,200 pounds so you will be able to use the Fulton Bolt-Thru Swivel Marine Jack, # FXP10W0301.
    view full answer...
  • Replacement Bolt-Thru Jack for a Shelby 5784 Jack
    As long as your current bracket measures 2-1/8" from the center of the bolt to one of the pin holes then the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 will work great as a replacement for your Shelby 5784 bolt-thru jack.
    view full answer...
    Image 1 for
  • Fulton Swivel Jack Compatibility With Shelby Jack Welded Plate
    The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301 will work with the welded plate on your trailer as long as the plate has a measurement of 2-1/8 inches from the center bolt to the center of the pin holes.
    view full answer...
    Image 1 for
  • Replacement Bolt-On Fulton Trailer Jack
    Thank you for the photo it was helpful in determining what you need. The replacement would be the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 which has a bolt-through mount, 1,200 lb lift capacity and has bracket heights of 12-3/4" retracted and 22-3/4" extended. I've added a link to a video review of this jack for you to look at.
    view full answer...
    Image 1 for
  • 2 Inch Inner Diameter Side Wind Bolt-Thru Swivel Marine Jack
    Our least expensive side wind jack with a 2" inner diameter is going to be the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs item # FXP10W0301.
    view full answer...
  • Determining Correct Replacement Jack For 1999 R71 Ranger Boat Trailer
    Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. You will need to confirm that this jack will be compatible by measuring the mount on your trailer. The # FXP10W0301 needs a mount that uses a 1/2" diameter mounting hole with pin holes that are 3" apart on center. If your mount has these measurements this jack will be an exact replacement. If your mount does NOT have...
    view full answer...
    Image 1 for Image 2 for
  • Replacement for Fulton Magnum Series Trailer Jack
    The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 if you have a bolt-thru mounting bracket or part # FTJ120W0301 if you have a snap-ring mounting bracket. I have attached a photo of each to help you distinguish which you have. The bolt holes you are referring to are used as an alternative to mounting the mounting bracket to the frame of the trailer, not the jack to the mounting bracket. I called...
    view full answer...
    Image 1 for
  • Replacement Fulton Jack for Older Fulton Magnum Series Jack on Ranger Trailer
    The Fulton Magnum series jack on your 03 Ranger has been discontinued by the manufacturer. They list the # FXP10W0301 as a replacement for the discontinued jack if you have a bolt-thru mounting bracket or # FTJ120W0301 if you have a snap-ring mounting bracket. I've attached a photo to assist. This will work with your current weld on bracket for an easy replacement.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement Jack For Broken Shelby Model 5856A Swivel Trailer Jack
    I have an option for you, but since Shelby is out of business you will not be able to purchase another Model 5856A jack. Instead I recommend replacing it with the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 which will fit your existing jack mount so it will be an exact replacement, and you will actually have a little stronger of a jack as this jack has a 1200lb lift capacity compared to your Shelby jack that had a 1000lb capacity. I...
    view full answer...
  • Recommended Replacement for Fulton Magnum Series Trailer Jack
    The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 if you have a bolt-thru mounting bracket or part # FTJ120W0301 if you have a snap-ring mounting bracket. I have attached a photo of each to help you distinguish which you have.
    view full answer...
    Image 1 for
  • Replacement For a Shelby Jack With a 5-1/2 x 3" bolt Pattern
    We do not currently have a jack with a 5-1/2" x 3" bolt pattern to match the bolt pattern on your welded plate. I have measured a few different jacks to double check fit. I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs Item # FXP10. Fits 3" x 5" frames and does not require any drilling into the frame. If you prefer a weld on style I recommend Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs Item # FXP10W0301...
    view full answer...
  • Recommendations For Replacement Jack With 1000 Pound Capacity and Tapered Collar Bracket
    It looks like the item you selected, Fulton Bolt-Thru Swivel Marine Jack, part # FXP10W0301, would be a good replacement jack. On the back plate of this jack there is a raised or welded on circular piece of metal, but by what you described I do not think it will work with your existing bracket. I browsed through the website using the specifications you provided for your jack, I found a jack that should work for you. The Fulton Bolt-Thru Swivel Marine Jack w/ Caster, part # FXP10, which...
    view full answer...
  • Recommended Fulton Swivel Jack with Bolt-On Mounting
    The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301 is for weld on bracket # P9012-00 which is sold separately. If you are looking for a similar bolt on option, I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs # FXP10
    view full answer...
  • Difference Between Snap Ring and Bolt On Boat Trailer Jacks
    A boat trailer jack that uses a snap ring works differently than one that is a bolt-on, like yours, because the mounting bracket for a bolt-on jack and snap-ring jack will be different. Because you have a Fulton 1,200 lb bolt-on jack, I assume your mounting bracket that is welded on accepts a bolt, like part # P9012-00. If this is the case you are going to want a compatible, bolt-on jack, which is the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. This jack has a 1,200 lb capacity,...
    view full answer...
    Image 1 for
  • Is the Mounting Bracket Included with the Fulton Bolt-Thru Swivel Marine Jack Part # FXP10W0301
    The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part # P9012-00. The plate that you are referring to will attach to the above bracket. As you mentioned, you will need to cut/grind the old bracket off and weld the new one on in order to use this jack. I have attached a review video of the jack for you as well.
    view full answer...
  • What Fulton Bolt Through Jack do you Recommend for my 21' 3.000 lb. Centurion Ski Boat Trailer
    Your 21' Centurion Ski Boat weighs around 3,000 lbs. I always like to use the rule of half. Clearly the jack does not need to lift the entire boats weight but you want one that is not going to have to overwork to lift the tongue either. In that case the Fulton Bolt-Thru Swivel Marine Jack part # F1411300301 is going to be your perfect solution. With it's 1,500 lb. lift capacity it is going to get the job done really well and will last for years! The larger wheel will also make moving...
    view full answer...
  • Fully Retracted Length of Fulton Swivel Jack Part # FXP10W0301
    The overall length of the Fulton # FXP10W0301 jack you referenced is just slightly less than 24 inches, therefore it would be longer than what you are looking for. I took a look at the rest of the jacks rated for 1,200 lbs, and found that they are all of roughly similar length. If a 2,000 lb capacity jack that uses a foot plate instead of a caster would work for you, I would recommend the Pro Series Pipe-Mount Jack, part # PS1401060303. Fully retracted, the jack measures 17-1/4 inches...
    view full answer...
  • Trailer Jack for Use in Off Road Conditions
    The Fulton F2 Swing-Up Trailer Jack with Dual Wheels # F1413060334 may get around better in the conditions you're camping it. It will be hard to find a jack that will move that great on soft surfaces though. The weld-on Fulton Adapter Kit # F500320 mounting holes measure 3-1/2 by 4-1/2 inches.
    view full answer...
    Image 1 for
  • Availability of Swivel Bracket that Mounts to Trailer Frame for Fulton Jack
    Sounds like you are looking for the part # F500242 which is a swivel mounting bracket for the trailer side of a Fulton Jack like the part # FXP10W0301.
    view full answer...
  • Fulton End Cap for a TJ507 Marine Trailer Jack
    The # F500323 that you referenced should work for you. Your TJ507 jack was replaced by the part # FXP10W0301 which the cap has been confirmed as a fit for.
    view full answer...


< Previous






  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Noah M
Updated by:
Noah M
Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.