bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
Fulton

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K

Part Number: FXP15L
In Stock
$148.25
Retail:$170.18
You Save: $21.93
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it to easy to maneuver your trailer. Rust-resistant premium finish is 6 times stronger than traditional zinc. Great Prices for the best trailer jack from Fulton. Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K part number FXP15L can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (816)
  • Q & A (0)
  • Photos

Fulton Trailer Jack - FXP15L

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Bolt-On
  • 12 Inch Lift
  • With Wheel
  • Fulton
  • Steel

Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it to easy to maneuver your trailer. Rust-resistant premium finish is 6 times stronger than traditional zinc.


Features:

  • Supports, lifts, and lowers your boat or recreational trailer
  • Avoids winch posts, tool boxes or other accessories mounted on your trailer
    • Sidewind handle lets you crank jack without your hand getting smashed
  • Swings up and down smoothly
    • J-bolt handle lets you position jack quickly
  • Makes it easy to move your trailer in tight spaces
    • Caster turns a full 360 degrees
  • Resists rust and corrosion, even in areas with salt
    • Premium Z-Max zinc coating has a 600-hour salt spray rating
  • Incorporates a grease zerk for easy maintenance
    • No need to remove and re-lubricate gears
  • Lasts for years thanks to durable steel construction
  • Creates a stylish look with the spoked wheel
  • Bolts around trailer frame
    • Includes mounting bracket and hardware


Specs:

  • Application: up to 5" tall x 3" wide trailer frame
  • Lift capacity: 1,500 lbs
  • Bracket height:
    • Retracted: 12-3/4"
    • Extended: 24-3/4"
  • Screw travel : 12"
  • Rate of travel: 1" every 8 turns
  • Clearance: 14-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 8"
  • Limited 5-year warranty


Excellent Corrosion Resistance

The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time. So, the more you tow around it, the more you need to protect your trailer from it.


A rusted trailer jack welded to a trailer frame

The Z-Max zinc finish on this jack offers great corrosion protection, even with occasional use around saltwater, to help ensure that it doesn't end up looking like the one above. Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Traditional zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. Fulton's Z-Max finish lasts for 600 hours in the salt spray test - 30% longer than a standard powder coat finish.


The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion.


How to Determine the Lift Capacity You Need in a Jack

A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.



XP15L 0101 Fulton Trailer Jack - Swivel - Sidewind - 12" Travel - 1,500 lbs




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K - FXP15L

Average Customer Rating:  4.8 out of 5 stars   (816 Customer Reviews)

Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it to easy to maneuver your trailer. Rust-resistant premium finish is 6 times stronger than traditional zinc.

by:

Jack seems to work well and the larger diameter caster helps with pushing the trailer around. I'm not a fan of the 2 bolts and backer strip to attach. While it works, it doesn't look clean. SO, I ordered up properly sized galvanized U-bolts from Sturdy built, which looks cleaner to me.



by:

Very solidly built. Easy Installation

Ken profile picture

Ken

9/29/2024

Works Like a charm. Takes no effort to raise my trailer



by:

The trailer jack works great on my 80"X12' trailer. It has a grease fitting which is nice. Having the wheel is really nice.



by:

Perfect fit as a replacement on my zieman snowmobile trailer. It was a weld on mount and you had the right part for me to bolt on to the existing mount, saving me alot of work. Easy install. Thanks



by:

I just replaced the existing boat jack on my coyote trailer with Fulton marine jack. Night and day difference. This is my second purchase through etrailer. Received the products ahead of schedule and no issues.



by:

I didn't need a 1500 lb capacity jack, but it's a lot sturdier than the 1000 lb jack that just broke on my trailer. The internals seized up on the old one. This one has a grease zirc, so it will be easier to maintain. It also has a larger wheel for easier rolling on uneven ground.



by:

I purchased this jack to replace the Fulton 1000# rated jack on the trailer for my 22' boat. The 1000# jack was just a little to wobbly for comfort. This 1500# rated jack has a larger diameter cylinder and a bigger wheel and is much beefier in general. It was a direct replacement for my old jack and uses the same type of mounting bracket. Installation took me about an hour. The boat trailer is much more stable now when unhitched.

The service at eTrailer is awesome and they really instill confidence as a retailer. I will continue to look at their site first when internet shopping for trailer and other needs.



by:

Bought a new truck that had a lower hitch height. I could not flip up my current jack when my bass boat trailer was on the ball. I needed a jack that was up higher in the fully retracted position. This jack retracted 2 inches higher than my old jack. Plus I got the benefit of a large diameter wheel to roll the trailer tongue in my garage. The jack is definitely heavy duty. As always, etrailer had what I needed with fast shipping. I would not buy anything trailer related from any place else than etrailer.

Randall profile picture

Randall

7/14/2023

Used the new jack numerous times over the last year. It worked perfectly. The new jack also allowed me to roll the trailer tongue sideways if my truck ball wasnt exactly lined up. Great jack.



by:

Jack works well but note the minimum and maximum lift if your not replacing the same unit. I had to replace the tongue wheel also because this jack minimum lift was higher than the previous jack.



by:

Easy to install, looks and works great after 1 year. Wheel is a good size for making minor movements, as when hooking up. Jack handle comfortable to use.



by:

The box was broken and re-taped and several parts were missing.

Brooke M. profile picture
Etrailer Expert

Brooke M.

10/7/2024

Hi Diane. I am so sorry to hear the jack arrived like this. I will make sure a replacement gets on its way if its not already en route to you now.



by:

Replacing a 15+ year old Fulton and this one looks great as well! Service and delivery was perfect! Thank you!



by:

I bought this jack to replace one on my camping trailer that was too light. I installed it today in less than a half hour. Fit perfectly and is much heavier duty than the old one which is exactly what I was looking for. Etrailer had a great selection so getting just the right one was easy. Service was excellent and was delivered on time. Great company to deal with.

Chris B. profile picture

Chris B.

9/2/2016

Both products have worked out beautifully. Thanks for the follow up. E Trailer is a great company to deal with.



by:

Easy to install. Nice and sturdy rolls I. The garage a lot better than previous stand.



by:

We needed a jack that could allow for the trailer to easily move and then quickly move out of the way when it came to moving it. This jack fits that bill. It has a large wheel that moves easily in whatever direction and it does not appear to get hung up in gravel. I would definitely recommend buying this.

Bill H. profile picture

Bill H.

6/3/2017

Still holds up great to our use and abuse!



by:

Beautiful trailer jack. It was a breeze to install. It took me about 30 minutes. I recommend attaching the trailer to your tow vehicle to support the trailer while you remove the old jack and install the new one. That may be obvious to most people, but I used a separate hydraulic jack to lift and hold the trailer while I made the switch. The jack is installed on an EZ Loader boat trailer that carries an 18' North River fishing boat. The boat and trailer weigh in at around 3,000 lbs with fuel, gear, etc. I replaced a similar Fulton trailer jack rated at 1,000 lbs with a 10" lift that came with the trailer 17 years ago and is still working fine. My concern was the amount of manually pushing the trailer I now have to do with the smaller 6" wheel. I wanted a stronger jack with a bit more rise (new truck has a higher hitch ball) and with the larger wheel to make manually pushing a bit easier. The new trailer jack has a 2" tube that is stronger than the 1 1/2" tube on the jack I replaced. This Fulton FXP15L rated at 1,500 lbs and a 12" lift and 8" wheel is exactly what I needed.

The MaxxTow MaxxHaul trailer dolly was also a breeze to assemble. I did have one challenge in that the provided M12x60 bolt that connects the wheel assembly to the pivot would not fit through the the 1/2" hole provided in the pivot bracket. I needed a 7/16" x 2 1/2" bolt to assemble the dolly without drilling out the provided holes. This required a trip to the hardware store to obtain and complete the assembly. The dolly is designed well and of high quality. I'm glad I got the pneumatic tires and the dolly has the flexibility to be used as a towing arm on with an ATV or lawn tractor.

Purchasing from etrailer was a great resource to locate, review, and purchase the products I needed - lights, trailer dolly, trailer jack - shipping was fast (and free with my order). Order follow-up and customer service is excellent. Highly recommend checking eTrailer first before purchasing your trailer parts and accessories anywhere else. Excellent pricing, free and fast shipping - tough to beat that.



by:

As always, etrailer comes through! Excellent jack, good quality, perfect fit, in fact it's the only jack I found that fit my trailer. 1 year of use in saltwater at still looks new, I expect many more years of service from this jack. Fast shipping and a fair price, what else could you ask for?



by:

The product is perfect for my trailer....gross weight boat and trailer about 3,500 lbs, and the big wheel, and low gear ratio jack makes every thing work perfect and effortlessly. Great improvement for my boat trailer!



by:

Was hoping it wasn't made in China but what can ya do? Overall Quality is great. This is replacing a cheap amazon jack on my boat trailer. The whole boat and trailer is roughly 2500 lbs and mounts to the side of the Tonge as is typical on a boat trailer. The old jack flexed so much to the side under load that it finally gave out. This jack is night and day difference! Zero flex under load and the large polymer wheel rolls very nice on the pavement when I need it to.



by:

My old jack on my Ranger Bass Boat had seen it's better days, This one is much heaver duty than my old one. The old one was 1,000lbs, the new one is 1,500lbs I am glad i went with this one. I started to get one form BPS but it sucked, and was the same price as this one, it's smooth, and looks great.

Joseph R. profile picture

Joseph R.

7/8/2014

Still looks new and works like the day i purchased it. Best jack I have ever used and I have had several boats and trailers. Makes putting your trailer on and off the ball easy.



by:

This makes my life so much easier as I don't have to ask my wife to help push my 18' Hewes fishing boat while I hit the jack wheel with my big rubber hammer to get the soft rubber wheel to turn on concrete garage floor. I bought the trailer and boat used and the jack on it is cheap. Don't try to save money on this type of equipment!!! The wheel turns so easy when guiding the boat myself.



by:

The FXP15L was an excellent upgrade over an older 1,000 lb capacity jack for my 24 ft boat. It works effortlessly and was an easy installation. The older jack was becoming harder to crank despite plenty of grease. After reading other reviewers comments about how much better the 1,500 lb jack worked for them, I decided to try. I am glad I did and etrailer made it easy.



by:

I bought this trailer jack because the existing jack on our trailer was a little flimsy. This jack is significantly stronger and resolved my concern. As always, etrailer shipping was fast. It took two days to receive the jack in Shady Shores, TX.



by:

This is the second Jack assembly that I have purchased for another trailer I recently purchased. These work great on larger trailers given the high capacity and is the only swing away jack that has a 12" lift. I use these on my military trailers to replace the old manual jacks and they have the height and weight capacity to do the job.

The large wheel has held up well dragging over rocks and concrete over the years.

Pricing and customer service has been good from etrailer!



by:

I have made two separate purchases from etrailer.com at different times. In both cases the product arrived quicker than expected and was exactly what I ordered. Thus far I have been please with the products I received, in that they seem as good or better than I expected. On one of those purchases because there were so many selections to chose from and I was trouble identifying which products met my requirements, I called and asked for help. The sales person promptly prepared and sent me an email listing the specific product numbers of all of the products from which I could choose that met my requirements.


25
815
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Will Fulton Bolt-Thru Swivel Marine Jack Swivel to Position With Bracket Turned to Side
    The bolt-on Fulton Bolt-Thru Swivel Marine Jack # FXP15L comes with its own mounting kit which will fit directly on 3" x 3", 3" x 4", or 3" x 5" trailer frames, so you wouldn't need to use your current jack mounting plate. That said, it will swivel to the correct position, though I recommend do mounting it to your trailer frame using the included plate and bolts. I have added a link to a video review for you to check out as well which shows how to install the Fulton Bolt-Thru Swivel Marine...
    view full answer...
  • Replacement for Fulton Jack for Boat Trailer
    The best option we have is a new bolt-on trailer jack as there isn't a Fulton jack that will mount to a 5-1/2" x 3" weld-on bracket. For a great jack I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15L. This jack will fit 3" x 3", 3" x 4", or 3" x 5" trailer frames, has a 12" lift and 1,500 lb capacity. I've added a link to a video review for you to check out as well.
    view full answer...
  • Fulton 1500-lb Bolt-Thru Pull-Pin Swivel Jack
    Thank you for the photo of your Fulton jack. Your jack is a bolt-thru type pull-pin swivel jack. The 1500-lb-rated Fulton jack you can use in place of your existing one is part # FXP15L.
    view full answer...
    Image 1 for
  • Replacement Jack For Older Utility Trailer With A Fulton Jack
    I took a look at what we got, and it doesn't appear that we stock any of the older Fulton jack parts, however I do have another suggestion. I know you prefer to use what is already there, however since you're wanting to bolt on a wheel, I recommend upgrading the entire unit. I suggest going with the Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind # TJDA-5000S which will easily bolt onto your trailer, has a lift capacity of 3,000lbs, and has a total lift of 28-3/4". If you wanted...
    view full answer...
  • Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane Trailer
    I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, # PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your mounting plate on your LAK sailplane trailer model T-5. The overall dimensions of the mounting plate are 6-3/8 inches by 5-1/2 inches, and the bolt hole pattern is 4-3/8 inches on center for the outer most holes, 3-3/8 inches on center for the...
    view full answer...
  • Recommended Trailer Jack With 1,500 lb Capacity and Retracted Height of 12-3/4 Inches
    The Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs # F1410050149 has a fixed height of 14-1/2 inches. We don't have a fixed height option for a 1,500 lb jack, so I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L which is shorter at the retracted height of 12-3/4 inches but also extends to 24-3/4 inches. I've attached a couple videos to assist.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Height of 5K Titan Coupler For 3 Inch Channel Tongue & Side Frame Mount Jack w/ Extended Height
    The Titan Zinc-Plated, Leverlock Coupler # T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the Titan Coupler - Painted - Multi-Fit Ball - 3" Channel - Bolt On - 5,000 lbs # T2343400. In regards to the jack, there isn't a sidewind pull-pin option or other style that has the type of lift you are looking for. Almost all of the boat trailer...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Trailer Jack for Weld On Mount Shelby Jack Model Number 5874A8
    Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 for example. This is compatible with jacks like # FXP10W0301. Your other option is to ditch the welded plate if it doesn't match up and use a mount like that found on the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind...
    view full answer...
    Image 1 for
  • Replacement 1,200 Lb Snap-Ring Jack for Trailer
    The Fulton Round, Snap-Ring Swivel Marine Jacks like part # FTJ120W0301 all max out at 1,200 lbs. It does use a 2-1/2" snap ring mount so if you have a Fulton mount on the trailer this will be a direct replacement. It does come with the mounting bracket as well but this would not be needed if you already have Fulton mount. For a higher rated option you'd have to go with a bolt-on, the Fulton Bolt-Thru Swivel Marine Jack part # FXP15L.
    view full answer...
  • Why Would Fulton XP15 Jack Not Want to Fit a 4 inch Tall Trailer Frame
    Sounds like you may have the bracket rotated 90 degrees from where it needs to be to allow you to use the different mounting holes that are wider. Check out the picture I attached that shows the part # FXP15L installed on a 4 inch tall trailer frame like yours. Notice the orientation of the bracket on the outside of the frame.
    view full answer...
    Image 1 for
  • Replacement Jack For Shelby 5856A Boat Trailer With 12 Inch Travel And 1500 lb Capacity
    For your Shelby 5856A boat trailer, I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12" Lift - 1,500 lbs # FXPD15L. This jack has zinc plating for corrosion resistance and durable poly wheels. For the single wheel option, you can use the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L.
    view full answer...
  • Recommended Replacement for Shelby 5876 Trailer Swivel Jack
    Your Shelby trailer jack 5876 is a side-wind pull-pin side-frame-mount caster wheel swivel jack that bolts on to a trailer frame. For the same style and capacity I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15L. This jack has a 12" lift and fits 3" x 3", 3" x 4", or 3" x 5" trailer frames.
    view full answer...
  • Replacement Boat Trailer Jack Non-Swiveling For Clearance Of HitchMate Boat Trailer Step
    The HitchMate Boat Trailer Step part # HE4036 should fit with a swing up jack depending on where you place the step. The retracted height of the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind part # FXP15L is 26" so you may be able to make both fit depending on where you want the step to be located on your trailer frame. If you still prefer a jack that does not swivel, I recommend etrailer Square, Fixed-Mount Marine Jack - Drop Leg part # MJSQ-2500B which has a 29-1/8" Lift...
    view full answer...
    Image 1 for Image 2 for
  • Options to Replace Shelby 5764A Trailer Jack
    Thank you for that info, and while we have some options for you to replace your Shelby 5764A trailer jack, there isn't one that is going to fit that bolt pattern. So you have a couple of things you can do, which is either have a new plate welded on, or use a bolt-on jack but in a different location on the frame that won't interfere with where the current weld-on plate is now, if possible. If it is not, then you'd have to have the current weld-on plate removed. So long as your trailer...
    view full answer...
  • Recommended Side Frame Mount Jack That is Florida Weather Resistant for 2,000 Pound Trailer
    For a side frame mount jack that is weather resistant I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift # FXP15L. This jack has a lift capacity of 1,500 lbs which will be more than capable of handling the tongue weight of your trailer. The tongue weight is typically 10-15% of the trailer weight so your jack only needs to be able to handle 300 lbs. It is not a problem to have a jack with a weight rating higher than your tongue weight. Having a jack with...
    view full answer...
  • Replacement Handle and Square Bushing for the Fulton 1500 lb Marine Jack XP15L
    For the Fulton 1,500 lb trailer jack, # FXP15L, you will need the Replacement Sidewind Handle Kit, # F0933305S00. This kit includes the crank, pin and square bushing you referred to.
    view full answer...
  • Replacement Jack with Large Diameter Wheel
    When choosing a trailer jack, you will want to choose a jack whose capacity meets or exceeds the fully loaded and ready to tow tongue weight of the trailer. All of the Dutton-Lainson trailer jacks use the same 6 inch wheel, so if the size of the wheel on the jack you currently have is unsatisfactory, you might want to look in a different direction, to a different manufacturer. Fulton makes a few jacks that feature a higher capacity and a larger-diameter wheel. The Bolt-Through Swivel...
    view full answer...
  • Determining Correct Replacement Jack For 1999 R71 Ranger Boat Trailer
    Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. You will need to confirm that this jack will be compatible by measuring the mount on your trailer. The # FXP10W0301 needs a mount that uses a 1/2" diameter mounting hole with pin holes that are 3" apart on center. If your mount has these measurements this jack will be an exact replacement. If your mount does NOT have...
    view full answer...
    Image 1 for Image 2 for
  • Should Fulton Magnum Trailer Jack Wheel Swivel
    Does the deep groove look like it was caused from damage or is it how the jack was designed? The Fulton Magnum with a wheel was designed to swivel so if yours does not swivel that would indicate most likely there is a problem with it. We have similar jack like the Fulton # FXP15L like you referenced which does swivel and would be a great replacement.
    view full answer...
  • Recommended Trailer Jack to Replace Shelby Model 5874A8
    To replace the Shelby trailer jack on your boat trailer, I recommend looking at the Fulton Bolt-Thru Swivel Marine Jack # FXP15L. This is a great sidewind jack that will have the same 1,500 pound capacity as the Shelby 5874A8 you are replacing but with a greater lift of 12 inches. It has a Z-Max 600 zinc finish that will provide superior corrosion resistance and a 600-hour salt spray rating. This jack has a bracket height of 12-3/4 inches when retracted and 24-3/4 inches when extended....
    view full answer...
  • Replacement Boat Trailer Jack for 1995 4 Winns Trailer with Welded Bracket
    I do have options for you but we do not offer any jacks that will fit the existing bracket you have on your trailer frame. Therefore, I recommend just using the Fulton Bolt-Thru Swivel Marine Jack part # FXP15L as it is a bolt-on fit that won't even require you to remove your existing bracket. I am not sure which type of bracket you have now but most most of the time you end up just replacing the bracket and jack together as it is very difficult to try and find compatible parts, especially...
    view full answer...
    Image 1 for
  • Availability of Fulton Trailer Jack to Attach to Weld on Jack Mount on Trailer
    What you described sounds like the mounting style of the Fulton jack part # FXP15L which has a 1,500 lb capacity. If you were looking for a jack to bolt to the plate you have on your trailer this would work well.
    view full answer...
  • Replacement Jack for 1996 Mastercraft Prostar 190 Trailer
    While we do have replacement jacks that will work for your 1996 Mastercraft Prostar 190 trailer, there are none that are going to be a direct bolt-on replacement for the bracket you currently have on. So what you will need to do is use a bolt-on jack like the Fulton Bolt-Thru Swivel Marine Jack - 12" Lift # FXP15L.
    view full answer...
  • Do Trailer Jacks with Two Wheels Make it Easier to Maneuver a Jack on Concrete
    Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt or gravel easier. A Fulton jack such as # FXPD15L is going to be the better jack compared to the MaxxTow line of jacks. I do recommend going with a Fulton. For a single wheel version use # FXP15L.
    view full answer...


< Previous



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Hayden R
Installed by:
Hayden R
Employee Adam E
Installed by:
Adam E
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Ryan F
Updated by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.