bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
Fulton

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs

Part Number: FXP15W
$120.32
Retail:$316.00
You Save: $195.68
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this weld-on swivel jack is perfect for lightweight marine applications. Extends 12-1/2" above your trailer frame. Measures 14-1/2" when retracted. Great Prices for the best trailer jack from Fulton. Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs part number FXP15W can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (822)
  • Q & A (0)
  • Photos

Fulton Trailer Jack - FXP15W

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Weld-On
  • 10 Inch Lift
  • With Wheel
  • Fulton
  • Steel

With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this weld-on swivel jack is perfect for lightweight marine applications. Extends 12-1/2" above your trailer frame. Measures 14-1/2" when retracted.


Features:

  • Ideal for marine and recreational use
  • Fits all mounts up to a 3" x 5" trailer frame
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Z-Max 600 zinc finish provides superior corrosion resistance
    • 600-Hour salt spray rating
  • Bolt-Thru mount provides minimum deflection and maximum support
    • 3-D Formed, heavy-gauge steel stampings
    • Proprietary bushing material
  • Heavy-gauge steel construction
  • Weld-on bracket sold separately
  • Sidewind design
  • Thermoplastic wheel and mounting bracket included


Specs:

  • Application: 3" x 3", 3" x 4", or 3" x 5" trailer frames
  • Bracket height:
    • 14-1/2" Retracted
    • 24-1/2" Extended
  • Lift: 10"
  • Clearance: 12-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 8"
  • Lift capacity: 1,500 lbs
  • Uses an 8 pitch acme screw
    • Takes 8 turns of the handle to raise or lower the jack an inch
  • Limited 5-year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



XP15W 0301 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,500 lbs




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs - FXP15W

Average Customer Rating:  4.8 out of 5 stars   (822 Customer Reviews)

With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this weld-on swivel jack is perfect for lightweight marine applications. Extends 12-1/2" above your trailer frame. Measures 14-1/2" when retracted.

by:

Great product, upgraded from 1000 lb jack to 1500, process was easy



by:

Exact replacement for my 2008 Mastercraft trailer! Quick deliver time!

Mitch profile picture

Mitch

6/10/2023

Great Product! Didn’t realize how bad my old one was, so much easier to crank!



by:

This Fulton Trailer Jack was a perfect replacement match to my Supra (Boat Mate) trailer. The etrailer website fully detailed the jack description's, it made it very easy to select the correct one.
I ordered and received the product within the week. Great company and great website, I would recommend them to anyone!

Rick K. profile picture

Rick K.

3/31/2021

Working smoothly and the added grease fitting was great addition!



by:

This is an excellent jack the only problem I had is finding it, these are put on Lund boat trailers and the mount is welded on to the trailer. Fulton changed the name of the jack from a magnum series to fxp15w

Samuel H. profile picture

Samuel H.

6/1/2016

It is working great.



by:

Heavy duty unit.



by:

Jack fit the welded base fine. Just a minor adjustment to the hole size and alignment was required. Item was shipped promptly and arrived in good condition. The new jack has a grease fitting however no instructions were provided on how much grease to use or how often it would require grease.

Rachael H. profile picture

Rachael H.

6/22/2015

According to my contacts at Fulton the FXP15W should be greased once a year. The grease fitting serves the gears for the handle of this jack only. This information can be found in the maintenance section of the instructions.



by:

ETrailer has unbelievably quick shipping

Dale profile picture

Dale

4/8/2023

Still performing!! What a great product



by:

Arrived very quickly. The people there are a joy to deal with. The jack worked as advertised, change out was very simple. I forgot how easy it should be to jack up your trailer. Happy camper.

Jim G. profile picture

Jim G.

11/28/2017

Still works as it should



by:

Perfect fit... Works flawless. So happy with purchase... Thanks for your help



by:

Your web site was easy to navigate, the product I needed was right in front of me. It was delivered when I expected it, it was exactly what I ordered. It fit to perfection and I am very very happy! I will order from you in the future for sure!



by:

Easy install, and works great. This jack was a direct replacement for the one that was factory installed on my boat trailer and I should have replaced it years ago. The original jack had become difficult to crank due to rust on the jack screw and finally it stripped out to the point that it would no longer lift the tongue off the ball of the truck hitch. Literally a 10 minute replacement and now everything moves smoothly on and off the hitch. Well worth the investment in my case.



by:

Delivery was really fast.



by: 06/18/2024

Excellent customer service, got product the very next day!!!



by:

A great replacement for my old Fulton Magnum 1500 jack. Bolted right on my welded plate, operates smoothly, and gives me more vertical lift to clear the hitch ball. I bought from etrailer because they published good information about what I should buy to replace the old jack.



by:

Etrailer had exactly what I needed. The Jack I needed to replace and been replaced with a new model, and they called the manufacturer to make sure I got the right thing. Great service.



by:

A great replacement for my Fulton Magnum trailer jack. Has a grease zerk for the gears and a beefier wheel. One nut to remove and replace the jack using my existing bracket.



by:

We love this company! We have used it twice and they process the order quickly and the product arrived a day early this time. We purchased this trailer jack to replace the previous one that fell apart on the extremely rough highway from West Virginia to Central PA.
My husband has called in the past for help and gets a live person who is very helpful.
Wonderful of them to follow up after the product is delivered as well. Thank you so much it seems it is harder and harder to find a company that cares.



by:

My old part was worn out and felt a new versus rebuilt was the way to go. This bolted on in a few minutes and worked perfectly on my boat trailer. Much easier and not that much more expensive than rebuilding the old one. Has been in service for a year and a half with it operating flawlessly when used.



by:

I am very happy with my new Fulton Bolt-thru Swivel Marine Jack. The trailer I have had one on it and it was abused. This was an extremely easy installation and it works great. etrailer.com web site was extremely easy to use and made my purchase even better. Thank you



by:

Just wanted to thank Bob Gisi at etrailer in Wentzville for the great help and fast service. Got my 1500# Fulton trailer jack the next day, Fit perfect and installed with ease. Thanks Bob, you treat me like family ! I will ordering again soon.



by:

I wasn't certain if this was the jack I needed. I spoke to a customer service rep from etrailer and they assured me it was. It arrived quickly, attached quickly, works perfectly.



by:

My experience was great from start to finish. Product is well built and is exactly what I ordered. I would recommend dealing with Etrailer for any of your trailer needs. I'm an actual customer that is pleased with the service I received.

Thanks,
Gary- upstate NY



by:

Fit perfectly as a replacement for the original jack. Easy to install only had to take off the large retaining nut. Wheel is much larger than the old one which makes it perfect moving around a little when needed. Very happy with this purchase.

Roy profile picture

Roy

8/16/2022

Still looks like new. Works great have no issues with it at all.



by:

Although sending a brand new product, I'm still amazed at ETrailer and their wonderful attitude. I drove all day looking for a part, never found it, spent 5 minutes browsing their site, and in 10 was waiting for it to arrive on my doorstep. I was contacted 3 times to notify me not only of my placement of the order, but that the order was packaged, and that they would be upgrading my shipping for free since I was a first time customer, THANK YOU ETRAILER.COM



by:

Appears to be well-constructed. Entire change out with the existing jack was about 5 minutes. I really like the larger wheel and ease of cranking. We'll see how it performs after a few trips to the bay...


25
821
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Replacement Hardware and Jack Compatible with Welded Fulton Mount
    It sounds like you are looking for the Replacement Hardware Kit for Fulton Swivel Jack, # F0933325S00, along with a 1500 lb jack. For your 1500 lb jack, I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs, # FXP15W. This will fit with your welded mount. I reached out to my contact at Cequent, the maker of Fulton Jacks, and they let me know that the XLT Jack, # F141132 is not compatible with your welded mount.
    view full answer...
  • What is the Measurement of Fulton Marine Jack from the Floor to the Bottom of the Bracket?
    I think you are on the right track. The Fulton Bolt-Thru Swivel Marine Jack you mentioned, part # F1411300301, is rated at 1500 lb. With the jack fully retracted, the distance from the bottom of the mounting bracket to the floor is 12.5". I think that part # FXP15W is the one you are looking for. It measures 11" from the floor to the bottom of the mounting bracket. On our website, we provide the bracket height for most jacks by measuring from the floor to the center of the bracket instead...
    view full answer...
    Image 1 for
  • Replacement Bolt Thru Fulton Sidewind Swing Up Jack
    The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs, # FXP15W will work for your application. A similar jack like the Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs, # F141132 is also an option. The bolt through design on the Fulton Jacks is a universal mount for them, so all their bolt through models are compatible with that welded plate on your trailer. The Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind,...
    view full answer...
  • Replacement Trailer Jacks for Existing Fulton Weld On Mounting Bracket
    Thank you for providing the picture of your existing mount. This was helpful to idenfication and I have attached it to this post. As you mentioned, the 90 degree snap in holes are 3" apart from center to center. It may be helpful to note that the center bolt is welded in at the manufacturer. The part that is welded on your trailer is the Fulton # P9012-00 Mounting Bracket. If you no longer have the stepped bushing and locknut you can order the Fulton # F0933325S00 Replacement Hardware...
    view full answer...
    Image 1 for
  • Replacing Fulton Trailer Jack on 2004 Boat Trailer
    Most likely the # FXP15W would work great as a replacement for what you have but it's hard to verify that without seeing how what you have now mounts to the trailer. If you could send me a picture of what you have I can verify.
    view full answer...
    Image 1 for
  • Replacement Jack for Bulldog BD154107
    In terms of a direct replacement for the same mounting method as your Bulldog # BD154107, you'll want to use the Fulton # FXP15W . which will bolt on to your existing welded on jack mount and comes with a wheel. The main difference between these two jacks is that the tongue weight capacity of the Fulton # FXP15W is only 1500-lbs, as opposed to the 2000-lbs of the Bulldog jack you're replacing. As long as the tongue weight of your trailer is less than 1500-lbs though it shouldn't be an issue.
    view full answer...
    Image 1 for
  • Replacement Jack For Shelby 5856A Boat Trailer With 12 Inch Travel And 1500 lb Capacity
    For your Shelby 5856A boat trailer, I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12" Lift - 1,500 lbs # FXPD15L. This jack has zinc plating for corrosion resistance and durable poly wheels. For the single wheel option, you can use the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L.
    view full answer...
  • Mounting Plate Recommendation for Fulton XP Trailer Jack
    The picture you submitted looks like the mount of a Fulton XP jack part # FXP15W. Which if you are looking for a replacement mount you'd want the part # F500349.
    view full answer...
    Image 1 for
  • Replacement 800-lb Fulton Swivel Jack for 1995 Shorelandr Boat Trailer
    We can help you select a replacement jack for your 1995 Shorelandr boat trailer. The linked page will let you see all Fulton brand side-of-frame-mount swivel jacks which are offered in lift capacities from 400 to 2000-lbs and in both weld-on and bolt-on types. Lift height is either 10-inches or 12-inches. For example, Fulton # FXPD15L is a 1500-lb 12-inch lift jack with dual wheels that bolts on to a 3 x 5-inch trailer frame. It is always a good idea to use a jack rated higher than your...
    view full answer...
  • Recommended Replacement Jack for Shelby Trailer Jack
    The Fulton Bolt-Thru Swivel Marine Jack # FXP15W is a bolt through replacement option for you. This is designed to use a welded plate like the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. It appears like you have a bolt that goes into a threaded plate, so the reverse of this assembly. If that is the case, I believe this jack will still work, but you will need to put the bolt through the jack first and then thread the bolt once behind the jack into the welded plate.
    view full answer...
    Image 1 for
  • Recommended Boat Trailer Jack To Replace Shelby 5865A That Uses Same Mount On Trailer
    We have exactly what you are looking for. I recommend the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 which we have been able to confirm will fit the same jack mount as your discontinued Shelby 5856A Trailer Jack. The # FTJ120W0301 has a 1200lb capacity, a caster, up to 10" of lift, and its zinc finish has a 600 hour salt spray rating so it will hold up perfectly in wet conditions. I included a video of the # FTJ120W0301 being...
    view full answer...
  • Replacement Bolt-Thru Fulton Trailer Jack for Welded-On Bracket
    If you have a bracket welded on the frame like the Jack Mounting Bracket for Fulton Marine Jack part # P9012-00 then you can use the Fulton Bolt-Thru Swivel Marine Jack part # FXP15W. If you have something different then just let me know.
    view full answer...
  • Bolt Through Trailer Jack Replacement
    I recommend Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs Item # DL22210. This jack allows you to bolt through the frame however, it comes with brackets that will fit where your existing jack sits. The mounting holes on the plate are 5-1/2" x 3-1/2". I have provided a link to a review video so you can take a look at it.
    view full answer...
  • Replacement Jack Recommendation for a Fulton Magnum 1,200 lb Jack
    What would work as a replacement for your Fulton 1,200 lb jack that I would recommend is the Fulton Round, Snap-Ring Swivel Marine Jack # FTJ120W0301. In your pictures you did not include one that shows the bracket that attaches to your trailer mount, but you will need to reuse that bracket to install this jack. I attached a review video for this jack for you to check out also.
    view full answer...
    Image 1 for Image 2 for
  • Recommendation for a Weld-On Trailer Swivel Trailer Jack with Wheel for Boat Trailer
    It looks like the jack on the trailer is a Reese swivel jack. The Fulton jack you referenced # FXP15W, should fit in its place no problem. Fulton and Reese are sister companies. However, the bolt holes are 3 inches on center. You will most likely have to have jack mounting bracket # P9012-00 welded on by a qualified professional welder since none of the current jacks/mounting plates are 3 x 6 on center. You are correct about a C-channel frame. It is not ideal for a bolt on jack. A weld-on...
    view full answer...
    Image 1 for
  • Recommended Trailer Jack for 2008 Mastercraft Boat Trailer
    Sounds like you have a great plan in place to freshen up your 2008 Mastercraft boat trailer. The Fulton F2 Fully Enclosed Trailer Winch, # FW20000301, that you mentioned is a great option and receives very favorable customer reviews. As for the jack, as long as your existing Fulton jack pivots on a single bolt, you could use the Fulton Bolt-Thru Swivel Marine Jack, # FXP15W, as a replacement. This jack has a lift capacity of 1,500 lbs so it should work great for your trailer. If your...
    view full answer...
  • Swivel Jack with Wheel Recommendation for 5 inch by 5 inch Trailer Frame
    Since your trailer frame is 5 inches wide the only options we'll have will be jacks that weld on to the side of the frame. You'd want something like the Fulton 1,500 lb trailer jack part # FXP15W with the weld on bracket part # P9012-00.
    view full answer...
    Image 1 for
  • Replacement Jack for Ranger Boat Trailer with Weld-On Jack
    The Fulton Bolt-Thru Swivel Marine Jack, Weld-On # FXP15W is designed to mount to its mounting bracket with a single center bolt. The mounting bracket designed to work with this jack is part # P9012-00. In order to replace the weld-on jack on your boat trailer, you will want to cut off the existing mounting plate. I spoke with Ranger boats and they informed me that the manufacturer of their weld-on jacks is no longer in business, and that there are no replacement parts for it. They said...
    view full answer...
  • Availability of Replacement Fulton 1500 lb Capacity Marine Trailer Jack
    The Magnum name isn't used anymore, but the jack hasn't changed much. You'll be needing part # FXP15L for a 12 inch lift or # FXP15W for a 10 inch lift.. If you click the provided link, you can see a product description video fearing the Fulton 1500 lb capacity marine jack.
    view full answer...
  • Recommended Replacement for Fulton Magnum Series 1,500 Pound Trailer Jack
    To replace your older Fulton Magnum Series 1500 Pound Jack, I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15W. This 1,500 pound swivel jack is what Fulton replaced the Magnum Series with, so it should use the same mounting design as your existing unit. It fits the Jack Mounting Bracket # P9012-00, for which I have attached an image with the dimensions labeled. You can compare this to your current welded plate to see if it matches. The Fulton Bolt-Thru features a corrosion-resistant...
    view full answer...
    Image 1 for
  • Will Fulton FXP15W Jack Replace a Fulton XP10W
    Yes, the Fulton Jack, part # FXP15W, will work as a replacement for an XP10W jack. The FXP15W has bit higher of a weight capacity and extends a couple inches more.
    view full answer...
  • Are Replacement Parts Available for the Shelby 1200 lb Jack
    I have a solution but we do not have any replacement parts available for the Shelby jacks. Instead a replacement would be what I had to offer. If it is a bolt on jack use the Round Swivel Marine Jack w/ Wheel part # MJ-1200B. If it is held in place by a snap ring use the Fulton Round, Snap-Ring Swivel Marine Jack part # FTJ12000101 it will come with the bracket and a new snap ring but in most cases you will not use the bracket. These are both rated at the same capacity of your Shelby and...
    view full answer...
  • Recommended Replacement Fulton Jack With 1,200 Pounds Of Capacity
    This is actually something that has come up before. Fulton will typically only list the jack's capacity on the jack, but not a part or model number. Since you found the 1,200 pound capacity, measured it at 16", and mentioned it being a bolt though style, the closest we currently have will be the Fulton Bolt-Thru Swivel Marine Jack # FXP15. This will be slightly shorter at 15-1/2" when retracted, but will have a slightly higher capacity at 1,500 pounds. This also includes all the hardware...
    view full answer...
  • Availability of a 1500 lb Capacity Bolt On Swivel Trailer Jack - Fits 5-1/2 x 3 Inch Trailer Tongue
    None of our bolt on jacks that meet your specifications would work on a 5-1/2 inch tall trailer tongue, all the bolt on offerings fit trailer tongues up to 5 inches tall. Your best bet would be to go with a weld-on application, like the Fulton # FXP15W. The weld-on bracket is sold separately as part # P9012-00.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Ryan F
Updated by:
Ryan F
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924