bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
Fulton

Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K

In Stock
$140.73
Retail:$205.86
You Save: $65.13
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Two wheels are more stable than one. Dual 6" diameter casters offer firm support on soft ground, and the wheelbase swivels 360 degrees. Zinc finish has a 600-hour salt spray rating for excellent rust and corrosion resistance. Great Prices for the best trailer jack from Fulton. Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K part number FXPD15L can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (813)
  • Q & A (0)
  • Photos

Fulton Trailer Jack

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Bolt-On
  • 12 Inch Lift
  • With Wheel
  • Fulton
  • Steel

Two wheels are more stable than one. Dual 6" diameter casters offer firm support on soft ground, and the wheelbase swivels 360 degrees. Zinc finish has a 600-hour salt spray rating for excellent rust and corrosion resistance.


Features:

  • Supports, lifts, and lowers your boat or recreational trailer
  • Swings up and down smoothly
    • J-bolt handle lets you position jack quickly
  • Offers twice the stability of single-wheel jacks
    • Wheelbase turns a full 360 degrees
  • Resists rust and corrosion, even in areas with salt
    • Premium Z-Max zinc coating has a 600-hour salt spray rating
  • Lasts for years thanks to durable steel construction
  • Avoids winch posts, tool boxes or other accessories mounted on your trailer
    • Sidewind handle lets you crank jack without your hand getting smashed
  • Incorporates a grease zerk for easy maintenance
    • No need to remove and re-lubricate gears
  • Bolts around trailer frame
    • Includes mounting bracket and hardware


Specs:

  • Application: trailers frames up to 3" wide x 5" tall
  • Lift capacity: 1,500 lbs
  • Bracket height:
    • Retracted: 12-3/4"
    • Extended: 24-3/4"
  • Screw travel : 12"
  • Clearance: 12-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 6"
  • Limited 5-year warranty


Excellent Corrosion Resistance

The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time. So, the more you tow around it, the more you need to protect your trailer from it.


A rusted trailer jack welded to a trailer frame

The Z-Max zinc finish on this jack offers great corrosion protection, even with occasional use around saltwater, to ensure that it doesn't end up looking like the one pictured above. Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Traditional zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. Fulton's Z-Max finish lasts for 600 hours in the salt spray test - 30% longer than a standard powder coat finish.


The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion.


How to Determine the Lift Capacity You Need in a Jack

A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.



XPD15L 0101 Fulton Trailer Jack - Swivel - Sidewind - 12" Travel - 1,500 lbs

Item # FXPD15L




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K - FXPD15L

Average Customer Rating:  4.8 out of 5 stars   (813 Customer Reviews)

Two wheels are more stable than one. Dual 6" diameter casters offer firm support on soft ground, and the wheelbase swivels 360 degrees. Zinc finish has a 600-hour salt spray rating for excellent rust and corrosion resistance.

by:

This jack is perfect for my Atv trailer. Finally a jack that can handle the weight, moves smoothly. A jack on steroids!

Dennis

7/28/2024

No complaints, works great. I use this on my 2 place Atv trailer. This trailer is on the heavy side. Love it!



by:

The dual wheels support the boat/trailer better and the more efficient gears in the jack for lifting the tongue make it much easier on me to crank.



by:

Parts were as exactly as described and the installation was seamless. The help videos are an excellent resource for preparing for the work.

Ben C.

7/11/2019

Awsome, holding up very well considering the multiple times a season it gets sumberged in salt water.



by:

Excellent product. I have a 3000lb boat and this jack is way better than the jack the boat came with.



by:

Cap was damaged in shipment but thanks to Chelsey S. at etrailer the replacement was on its way and arrived in no time! Only took ten minutes to install jack! Thank you etrailer, Samantha and Chelsey! Great product, great service and great company!



by:

Sturdy, universal and functional



by:

Box was damaged in shipping. This was due to the shipping company. The jack & hardware seems to be in good condition.



by:

It's strong looking and heavy. I'll see how it holds up on the boat trailer, but I paid more for a Fulton, so I don't expect problems. Etrailer is fast, and ]very easy to deal with.



by:

E-trailers was just wonderful no problems whatsoever got the part yesterday thank you guys very much enjoy your weekend thank you



by:

This is a great jack. We have now converted all six of out trailers over to this jack.



by:

Installed easy. Seems to be good quality, better than what came from the factory.



by:

Fast service, as always!!!



by:

The wheel is working out great after 1 year of use. I wish it would swivel more easily in softer soil.



by:

Installation was a breeze. Works like a charm - Good value and easy installation !! However, I am using this jack in saltwater for my fishing boat. I will submit more comments after a few months to report how the jack is holding !

Ed



by:

great people to work with and recieved product very quickly



by:

Quick delivery and great product.



by:

Super fast delivery



by:

Haven’t tested the product yet but purchasing and delivery was seamless!!



by:

Really nice when you get the quality product that you were looking for in the ads! I was upgrading from single wheel to dually for my boat trailer. It rolls much easier with the dually wheels on the jack, and the entire product is OEM quality. Really happy!
My old jack was moved to my son-in-law's trailer, which had a very old beat up jack that needed to be replaced.



by:

Melissa from e-trailer steered me in a great direction with this trailer jack selection. Part arrived on time and was installed in about 10 minutes. Perfect replacement for the original Fulton 2003 welded jack that came with the trailer.

Melissa was outstanding in her support and even "triple" checked that the jack was exactly what I was looking for.

e-trailer should be proud of their service and the quality of their products and personnel. KUDOS!

John

7/15/2019

Works like a charm! Thanks



by:

So far so good. I mounted this to a Triton 24’ enclosed aluminum snowmobile trailer with four sleds inside and it seems to be doing just fine. We have loaded this trailer fully twice when moving houses and this Jack is taking the weight fine. The previous Shelby unit was pure garbage. I would definitely recommend this to anyone looking for a good strong unit for a reasonable price. Just stay on top of lubricating it.

Dan M.

7/22/2021

This has been holding up well to the road salt, severe winters, and constantly being outside year round. I would strongly recommend this jack to anyone looking for a durable and strong tongue jack. Finish is fading a bit but no actual rust yet which is great!



by:

Well...I over-bought on this! However, I don't regret it one bit. The jack I replaced was awful: Worn-out loose, low amount of travel, just old. This Fulton is beefy and was a breeze to install. No issues, just bolted right on. The lift is smooth and high. The double-wheel caster makes rotating the trailer super easy. It swings up and solidly locks into place. An excellent bang for the buck and peace-of-mind.

Toby

8/21/2019

Got rid of the boat with the trailer. Know what the first thing the new owner saw? The jack! He liked how beefy it was for the job it had and its lifting range. It works great, no complaints.



by:

I agree with that others said about shipping. The box arrived broken and taped, but everything was still inside. The product looks well built, installed properly, and worked much easier than the old jack.

Other than shipping, the product appears to be as advertised.



by:

Very fast shipping!



by:

I received the trailer jack in good shape and installed it in about 10 minutes. Just takes 4 bolts.

Now my trailer is back in business.

Jgs

8/19/2015

It is working fine. I would buy another one when I need to replace an old one.


25
812
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Replacement for Dutton Lainson Jack on 2008 Ranger 621 Boat Trailer
    For a replacement jack I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXPD15L. This has a 1,500 lb lift capacity and the dual wheels you're looking for. The jack has a bolt-on installation and fits frames up to 3" x 5". The Z-Max 600 zinc finish gives you a 600 hour salt spray rating and it comes with a limited 5-year warranty. It also comes in black # F27CR but with a powder coat finish instead of the zinc.
    view full answer...
  • Correct Replacement Fulton Jack and Winch Strap for Essex Vortex Boat Trailer
    I can see you have a Fulton Bolt-Thru Trailer Jack so you can replace this with the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 which is a direct bolt-on fit and has a 1,200 lb weight capacity. Then for the Fulton XLT1401 Winch, I recommend the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200 which will work great as a direct replacement strap.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement Jack For A Shelby 5854a Jack
    When it comes to replacing your Shelby 5854a trailer jack I recommend switching to The Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12 inch Lift - 1,500 pounds # FXPD15L. This jack has a lift capacity of 1,500 pounds, and has a heavy-gauge steel construction. It has a 600-hour salt spray rating, and has a 12 inch lift. I attached a review video link below.
    view full answer...
  • Recommended Swivel Jack For Boat Trailer With 5,000 Pound Boat
    Your tongue weight is going to be 10-15% of your trailer weight. With a 5,000 lb boat and assuming a tandem axle trailer weighing an average of 1,000 lbs that puts you at 600-900 lbs of tongue weight. This would allow you to use the Fulton Bolt-Thru Swivel Marine Jack # FXP10 you were looking at. It has a lift capacity of 1,200 lbs which will be more than enough. It has a bracket height of 14-1/2" retracted, 24-1/2" extended, and a 10" lift. However, my personal recommendation would be...
    view full answer...
  • Bolt-On Side-Mount Dual Wheel Trailer Jack Recommendation for Utility Trailer
    Since you want a side-mount jack that will work on dirt/grass surfaces I suggest a dual-wheel type such as the Fulton # FXPD15L. Dual wheel will spread the weight over a larger area and help the jack function on such softer surfaces. The jack offers bolt-on installation, a hefty 1500-lb tongue weight rating, plunger-pin swivel operation and 12-inches of lift. If the surfaces are very soft or rutted you may instead prefer the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This...
    view full answer...
    Image 1 for
  • Is There an A-Frame Trailer Jack for a 2 Inch Opening
    I have a few options for you but almost all a-frame trailer jacks has a 2-1/4" diameter outer tube. Therefore, in order to install an a-frame trailer jack like the Bulldog Round A-Frame Jack part # BD155022 which has a 2-1/4" diameter outer tube you will either need to simply open up the hole you have another 1/4" or replace the trailer coupler with one like the A-Frame Trailer Coupler part # CA-5210-B or part # CA-5400-B. Although not ideal because of instability issues, there is also...
    view full answer...
  • Mounting plate Dimensions for the Pro Series Jack # PSEJ10000101 to Mount on a LAK Sailplane Trailer
    I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, # PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your mounting plate on your LAK sailplane trailer model T-5. The overall dimensions of the mounting plate are 6-3/8 inches by 5-1/2 inches, and the bolt hole pattern is 4-3/8 inches on center for the outer most holes, 3-3/8 inches on center for the...
    view full answer...
  • Replacement Bolt-On Swivel Jack For Boat Trailer
    I could not find anything specific to that part number, and Shelby is long out of business but for a bolt-on swivel jack there are a couple of options that will work for you, so long as you have a 3" x 3", 3" x 4", or 3" x 5" trailer frame. They are Fulton jacks with dual wheels for easier maneuverability, swing up to stow when you are traveling, and work with tongue weights up to 1,500 lbs: - Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Black # F27CR - Fulton Bolt-Thru Swivel...
    view full answer...
  • Availability of Replacement Swivel Jack Wheels for the Fulton Swivel Marine Jack with Dual Wheels
    For your jack you will be able to use two of the Replacement Wheel Kits for Fulton Marine Jacks - 6 inch, item # F6811S00, on your dual wheel jack.
    view full answer...
  • Bolt-On Trailer Jack that Will fit a 1-3/4 Inch by 4 Inch Trailer Frame
    For the 1-3/4 inch wide by 4 inch tall trailer frame I recommend Fulton Bolt-Thru bolt-on jack # FXPD15L. This jack has a 1,500 pound capacity, dual wheels, and a zinc finish to resist corrosion. I have included a link to a video review of this jack for you.
    view full answer...
  • Solution for Allowing Trailer with Trailer Valet Installed to Roll Without Cranking Valet
    I wish there was a way to free wheel the Trailer Valet. The only way to do that would be to install a second jack on the trailer that has a wheel caster on it which you could lower when you needed the ability to free wheel. Something like the Fulton part # FXPD15L would work.
    view full answer...
  • Replacement Jack For Shelby 5856A Boat Trailer With 12 Inch Travel And 1500 lb Capacity
    For your Shelby 5856A boat trailer, I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - 12" Lift - 1,500 lbs # FXPD15L. This jack has zinc plating for corrosion resistance and durable poly wheels. For the single wheel option, you can use the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L.
    view full answer...
  • Is it Possible to Add a Second Wheel to Dutton Liaison Single-Wheel Trailer Jack # DL22800?
    If you need a replacement wheel for your Dutton Liaison Single Wheel Jack # DL22800, the part you need is # DL22410. The jack you have is not designed for a second wheel. Instead, I recommend the Fulton Bolt-Thru # FXPD15L. It features a two-wheel design, supports up to 1,500 lbs and can provide up to 12" of lift.
    view full answer...
  • Replacement Side-Frame-Mount Wheeled Jack for Triton Boat Trailer
    Triton boat trailers are usually equipped with a side-frame-mounted swivel jack like the 1500-lb-rated Fulton jack # FXPD15L, which is a bolt-on design with dual wheels. The highest-rated wheeled jacks of this type have a 1600-lb rating, like the Fulton F2 bolt-on swivel jack # F1413040134. All jacks of this type are shown on the linked page. There are also jacks like # FTJ120W0301 which install using a snap ring that connects the jack to the mounting plate welded on the trailer frame....
    view full answer...
  • Available Types of Trailer Jacks
    You'll first want to confirm the required tongue weight (TW) capacity of your new jack to ensure you choose one rated high enough for the job. A simple way to measure a trailer's actual TW is a scale like # e99044 but other ways to measure are noted in the linked article. It is generally a good idea to select one with a good bit more capacity than you actually need since this will typically help the jack last longer. Jacks come in several types. The ones you referenced, Fulton Bolt-Thru...
    view full answer...
  • Mounting Hole Pattern of Electric A-Frame Trailer Jack
    The 3-bolt mounting flange on the Lippert Electric A-Frame Trailer Jack # LC285318 has a standardized hole pattern. This jack is intended to mount so that the included LED light faces forward toward the tow vehicle to illuminate the coupler and hitch ball. In the specs for this jack I saw nothing mentioned about rotating it. Similar electric A-frame jacks like # JET-3755 that also has an LED light built-in use a round mounting flange that has a similar mounting hole pattern. You are correct...
    view full answer...
  • Will Fulton Bolt-Thru Swivel Marine Jack # FXPD15L Fit 2 by 4 inch Trailer Frame
    The brackets of the Fulton Bolt-Thru Swivel Marine Jack # FXPD15L that you referenced have several holes you can run the bolts through so various frame heights are acceptable (4 inch being one of them), and the threads of the bolts go through most of the bolts so it would easily fit a 2 inch wide frame as well.
    view full answer...
  • Replacement Bolt-On Side-Frame-Mount Swivel Jack to Replace Shelby 5876A8
    The Shelby 1500-lb trailer jack 5876A8 is not available but we do have options in other 1500-lb-rated side-frame-mount swivel jacks. You can see all such products on the linked page. For a similar option that offers bolt-on installation consider the Fulton # FXPD15L or the etrailer # MJ-1500B.
    view full answer...
  • Replacement 800-lb Fulton Swivel Jack for 1995 Shorelandr Boat Trailer
    We can help you select a replacement jack for your 1995 Shorelandr boat trailer. The linked page will let you see all Fulton brand side-of-frame-mount swivel jacks which are offered in lift capacities from 400 to 2000-lbs and in both weld-on and bolt-on types. Lift height is either 10-inches or 12-inches. For example, Fulton # FXPD15L is a 1500-lb 12-inch lift jack with dual wheels that bolts on to a 3 x 5-inch trailer frame. It is always a good idea to use a jack rated higher than your...
    view full answer...
  • Dimensions for Fulton Bolt-Thru Swivel Marine Jack # FXPD15L
    I wasn't able to get a CAD drawing for the Fulton Bolt-Thru Swivel Marine Jack # FXPD15L that you referenced (manufacturer's don't typically make those available), however I did go out to our warehouse to take a few measurements on the jack. This swivel jack features an overall retracted height of right at 26 inches. From the bottom of the wheels to the center of the mounting bracket there is a length of 12 inches. It has an outer tube diameter of 2-1/4 inches and the bracket itself measures...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Best Trailer Tongue Jack for Maneuvering in Tight Areas and on Gravel or Soft Terrain
    The best swivel trailer jack for gravel and soft ground is the Trailer Valet # STC-V211. The Trailer Valet jack will have dual rubber wheels unlike the Fulton Jack # FXPD15L, which has plastic wheels, thus giving it better grip and support through the rougher and softer terrain. The # STC-V211 will also allow you to maneuver more precisely than the Fulton jack, because it has an integrated drive function that makes maneuvering effortless in tight spaces. Another really neat feature the...
    view full answer...
  • Weight Capacity of 1-3/4 Inch Square Tube Axle
    We don't offer any axles or hubs that are compatible with that wheel bearing set, but a 1-3/4 inch square axle would typically carry a 1000-2000 lb capacity. If you were needing a replacement axle, I'd be happy to look through our offerings of off-the-shelf axle sizes and check if we have anything that would be compatible. I'd need to know the hub face to hub face distance and the center to center spacing of the spring seats. I'd also need to know the wheel bolt pattern.
    view full answer...
    Image 1 for
  • Replacement Parts for Shelby 5854A Trailer Jack
    I do have a solution for you, however replacement parts for your Shelby 5854A Trailer Jack are no longer available. I recommend simply replacing your Shelby jack with a similar unit like the Fulton Bolt-Thru Swivel Trailer Jack # FXPD15L. This zinc plated marine jack has a lift capacity of 1,500 pounds and a total lift of 12 inches. It is a bolt-on installation and the hardware is included. I have attached a short video demonstration on this product so you can get a better look at its...
    view full answer...
  • 1,500 lb Dual Wheel Trailer Jack Recommenation for a 3 inch by 5 inch I-Beam Trailer Frame
    We have exactly what you would need. The Fulton Jack part # FXPD15L has a 1,500 lb capacity, has dual wheels, and can fit a 3 by 5 inch trailer frame.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Rachael H
Expert Research:
Rachael H
Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Installed by:
Patrick B
Employee Hayden R
Installed by:
Hayden R
Employee Adam E
Installed by:
Adam E
Employee Aidan B
Installed by:
Aidan B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Ryan F
Updated by:
Ryan F
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.