Dexter Single Hydraulic Jack System w/ Double Acting Pump - 12,000 lbs

Video Transcript for Review of Premium - Dexter Trailer Jack - DX62CR

Hello, everybody. Steve here with etrailer.com. Today we're looking at our Dexter Single Hydraulic Jack System with Double Action Pump, rated at 12,000 pounds capacity. Now folks, this is just the single action pump with the included motor and the reservoir here for your fluid. We do offer an additional jack leg with a add-on select valve, and you can purchase that separately. I'll put that add number on the screen if you want to go ahead and do two jacks versus one.

Now, a hydraulic jack kit is gonna be a lot smoother, a lot quieter than your traditional jacks where you gotta hand crank, even with the electric motor ones where you have to hear the noises and mess with those kind of things. This will give you a smoother up and down so it'd be great for maybe horse trailers with livestock, those kind of things, as well as your commercial and construction needs as well. Now again, it is a double acting pump and power unit that would attach to the jack with the included hoses and fittings. I put these hoses on top here. As you can see, they're pretty long.

And these would connect right here in the front. There's two connection points. I'm gonna set them off to the side here for now. And we're gonna zoom in and take a look at everything else. So you've got your motor here with the pump, and you've got the reservoir here for all the hydraulic fluid.

You've also got a nice remote here that would match up to the cord here on the pump and reservoir. You've got a nice bungee cord here for keeping those hydraulic hoses up and outta the way. And spinning it around to the back here you've got some hydraulic hose, elbows, and straight fittings, and you've also got your positive and negative connectors for the battery for powering up this unit here. Now this foot plate where we resumed in does pivot, and that's gonna help you on uneven surface. The foot plate is nine and a half by nine and a half square.

The jack tubing is four inch by four inch. The height of this jack, when it's fully retracted like it is now from the ground to the top, I got 30 and three quarter inches tall. And when it's fully extended, I got 50 and three quarter inches tall. Now has a max pressure when it's raising of 3,200 PSI, and when it's lowering it's 1500 PSI. The maximum of hydraulic flow rate is gonna be two gallons per minute. Now there's a selector valve that's gonna create a smooth and efficient operation, even for those heavy loads. And the square tube has a nice black powder coat finish and that would simply bolt to your trailer frame. Now you got a nice powder coat finish here on the motor itself as well. Well, folks, I think that's gonna wrap it up. Just a real quick look today at the Dexter Single Hydraulic Jack System with Double Acting Pump. I'm Steven. Thanks for watching.