Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Retaining-ring swivel jack easily swings up for travel and down for use. Features a 14-1/2" retracted height and measures 10" from mounting bracket to top, excluding handle. Includes weld-on mount, plunger pin and footplate.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to take a quick look at the Pro Series round snap-ring swivel jack part #: PS1401040303. Pro Series covers this jack with a limited one year warranty and it has a lift capacity of 2,000lbs. it uses 2 inch diameter tube, the outer tube is finished in black and the inner tube is zinc plated as well as the footplate thats welded to the bottom. This footplate is going to provide a nice steady flat base for supporting the nose of your trailer. Its a swivel design so once you have the mount welded to the trailer you can pull this release pin and rotate the jack on this mounting plate. This will allow you to swing the jack up and out of the way when youre ready to pull the trailer down the road.
There is a nice handle with a top wind setup for raising and lowering the jack were going to go over a couple of measurements real quick. If we measure from the center of our mounting bracket down to the bottom of the footplate we get 14 inches when the jack is fully retracted. That measurement is your bracket height. Now Ill take another one of these jacks thats extended all the way. Well measure from the same points again, center of the mounting bracket down to the bottom of the footplate and we get 29 inches.
The difference between those two figures, 15 inches is the amount of jack travel or lift. This is a weld-on style jack where youll take this back bracket and weld it onto the frame of your trailer. Youll then fit the jack over it and reinstall the snap ring thats here on the inside. And thats it for our quick look at the Pro Series round pipe mount swivel jack part #: PS1401040303.
Average Customer Rating: 4.9 out of 5 stars (294 Customer Reviews)
Retaining-ring swivel jack easily swings up for travel and down for use. Features a 14-1/2" retracted height and measures 10" from mounting bracket to top, excluding handle. Includes weld-on mount, plunger pin and footplate.My trailer had a jack that would fold up. I was never happy with it. I like the new folding jack very much. It was easy to install.
Very heavy duty for the price very high lift. Replaced my trialers jack perfectly since the mounting plate was offset tward the top adding lift which is exactly what i was looking for the gears are totally enclosed but the cap is removable so you can grease them. Pin to hold the jack in position is allot heavier then the competition and witth the triangle pull a snap even in the cold with gloves on. The only thing that would make this jack better was if you could turn the base plate or foot so it was more stable on uneven ground
Just opened the box and everything looks great. Happy with the product and service in every way. The video on etrailer website for the trailer jack helps a lot with the order process. Thank you very much for a great shopping experience.
I purchased the 2000 lb trailer jack that I use to pull my 1000 lb motorcycle behind my jeep. I couldn't open the rear door because of the original jack. The new swivel Jack solved my problem. It is 100 times smoother. I had it welded on at a muffler shop. Service was excellent it arrived within three days, I was highly satisfied with etrailer.
I looked a other brands of jacks and found this was excellent for what i wanted it for and the price sealed the deal. I very easily could have bought a lift for my sled but i wanted to build mine so i did. I now also have a good resource for my trailer parts.
Received my jack in a very short time. It appears to be of good quality. Just mounted it today so can't give a review of the product
Product was just as specified in photo and description. I ordered slightly larger jack and eased off the slip ring and replaced the new jack so no welding was needed for my project.
GREAT SERVICE & GREAT PRODUCT!!
Great jack. Welded right on. No problems. Works like a charm.
Not installed yet but appears to be stronger than the one it is replacing of the same weight class.
A great jack at a very competive price
I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.
The product, a trailer jack,is very good.
The delivery by UPS was terrible. They left my package out by the road leaning against the mailbox.
They always bring things up to the house and put it on the porch.
Its a miracle it wasn't stolen.
I reported it to etrailer and I will report it to UPS.
This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving.
It works! Only thing that I dislike was the way the handle hangs when it’s on vertical position leaving me to zip tie it so it won’t hang during a drive.
The trailer jack that I bought from etrailer has worked beautifully in every way and I would recommend it to anyone.
While I am praising etrailer I would like to note that I built my trailer because I needed a specialized trailer to carry a railroad handcar that is transported weekly to do rail maintenance work. I knew how to weld but I had no previous experience of trailer building. I found the etrailer website and experts available by email or phone to be very helpful in guiding me in the purchase of many parts for the trailer. These pars, including such things as tail lights, wiring and hitch have been faultless. I particularly recommend the axleless torsion suspension. The set I purchased performs superbly even on very rough roads.
My experience with etrailer was so pleasant that it makes me want to build another trailer just so that I can deal with etrailer again.
This jack stand #PSI1400300303, was ordered to replace a bent stationary jack on a used trailer I purchased and built up. A small 8' x 5' open trailer used for trash, firewood, moving, ect. with 2500lb axels and springs. With the tounge area being small as it was, locating the jack to swivel out of the way was exactly what I needed. The ease of use, extra clearence, height of rise was perfect when moving the trailer without the truck. Strudy skid plate, not a wheel was a bonus for my needs. Mounted easily, securely, quickly with all included hardware and instructions. Very happy with Jack and E Trailer's service and shipping.
I like the compact size of this swivel jack, unlike others that were so much taller. This one is the perfect size for my small utility trailer. The only option I wished it had was the option to switch out the foot pad for a wheel to easily maneuver it around.
I received Reese jacks instead of the PRO SERIES JACK as pictured.
I bought this trailer jack for a utility trailer after having had problems with other jacks with other designs. This one has worked perfectly, staying out of the way when I'm not using it, but working smoothly and effectively when I do. Installation was easy, and it's worked out great!
Works just fine. Here's a photo of it in use. Mounted to 100 gallon
portable fuel tank with 15gpm pump, meter, fuel separator. Unit is eco-friendly as it's self powered by a single solar panel constantly charging the battery that runs the pump.
Very heavy. Replaced an OEM with a wheel. I much prefer the foot to the wheel. Install was ok. I simply used the existing mount and the original snap ring. The snap ring shipped with the mount was a little thicker and I couldnt get it to work. I saved the weld on mount for another trailer I'm building.
Jack was perfect for the trailer I installed it on. Looks quality built, price was good, shipping was fast and communications was excellent. I look forward to doing more business in the future with Etrailer.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim P.
7/22/2014
I am very pleased with the trailer jack I bought from Etrailer. No problems at all. In the future if I need anything that you may carry, Etrailer will be the first place I will go to look for what I need. Thanksfor the great product.