bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Boat Trailer Jack
  4. Side Frame Mount Jack
  5. 1001 - 2000 lbs
  6. Sidewind Jack
Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K

Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K

Item # MJ-1500B-DWL
lowest price pledge
Our Price: $77.61
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 19 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Corrosion-resistant, clear zinc swivel jack with (2) 5-3/4" wheels is perfect for marine use as well as other recreational applications. Jack has an extended height of 23", a retracted height of 12-5/8", and a capacity of 1,500 lbs. Lowest Prices for the best trailer jack from etrailer. Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K part number MJ-1500B-DWL can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (489)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer Trailer Jack - MJ-1500B-DWL

  • Boat Trailer Jack
  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Bolt-On
  • Swivel Jack - Pull Pin
  • 11 Inch Lift
  • With Wheel
  • etrailer

Corrosion-resistant, clear zinc swivel jack with (2) 5-3/4" wheels is perfect for marine use as well as other recreational applications. Jack has an extended height of 23", a retracted height of 12-5/8", and a capacity of 1,500 lbs.


  • Marine jack lets you raise and lower your boat or recreational trailer
  • Swivel design lets you swing jack up for storage, down for use
    • 4-Bolt mounting plate provides extra side load support
    • Convenient 1/2", spring-loaded pull pin secures and releases jack
  • 2 Plastic wheels let you easily move your trailer
    • Inner tube rotates with wheels allowing you to move in any direction
  • Sidewind handle has comfortable, grooved grip
  • Corrosion-resistant clear zinc finish for durability
  • Bolt-on installation to the side of your trailer
    • Mounting bracket and hardware included


  • Application: trailers with a frame height from 2" to 4"
  • Bracket height (from bottom of wheel to center of bracket):
    • 12-5/8" Retracted
    • 23" Extended
  • Travel: 10-3/8"
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Dual-wheel dimensions: 5-3/4" diameter x 4" wide
  • Mounting bracket dimensions: 6-7/8" long x 5-3/4" wide
    • 5-1/2" From center of left holes to center of right holes
    • 2-7/16" From center of top hole to center of nearest hole
    • 3-7/16" From center of top hole to center of middle hole
    • 4-7/16" From center of top hole to center of bottom hole
  • Handle radius: 6-1/2"
  • Lift capacity: 1,500 lbs
  • 1-Year warranty


MJ-1500B-DWL Ram Round Swivel Marine Jack - 2 Wheel - Bolt On - Zinc - Side Wind - 10-3/8" Travel - 1,500 lbs

Customer Reviews

Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K - MJ-1500B-DWL

Average Customer Rating:  4.8 out of 5 stars   (489 Customer Reviews)

Corrosion-resistant, clear zinc swivel jack with (2) 5-3/4" wheels is perfect for marine use as well as other recreational applications. Jack has an extended height of 23", a retracted height of 12-5/8", and a capacity of 1,500 lbs.


Build is better than expected. Wheels rotate independent of each other with no binding. Crank is abundantly easy, pin latch is very secure. Using this on a homemade large duck house) chicken tractor and just drilled 2 3/8 holes through a vertical 2x4 and used existing hardware.

Its been a year and this has still been a solid purchase. Outside in the chicken house used once or twice a week and constantly in the weather it has no rust, no bending, no issues at all really. The small plastic wheels like to collect mud but it s right off with a few taps.
Joseph - 01/13/2022


I bought 3 of these and hooked them to the bottom of my backyard trampoline.
It lets one person "jack up" the trampoline and move it around when mowing.
I've had them a year and they show no signs of rust, and have weathers well.


Appears to be a good quality heavy duty could use a grease fitting to lube gears. Time will tell if holds up under heavy use


Really heavy duty part...
Easy insta


This is a great product for the money. I have a 16 ft. utility trailer and the wheeled Trailer Jack sure comes in handy to assist in hooking up the trailer to trailer the ball fully loaded. Great Quality. easy to swing out of the way when finished.


I installed the jack stand a couple days ago. Very happy with the quality and the double wheels make it very easy to maneuver the trailer around. Thank you!


This jack is for a new stinger trailer that hauls my can-am spyder. the trailer folds up for storage so it was important that the jack could fold and swivel works like a charm and is a quality product.


My application is very unusual in that I'm using the wheel jacks to lift and move a modular little log cabin around in my shop as I build it as a modular structure. The item description was very thorough and the quality of the product was outstanding. The customer service was outstanding as well.


Wheel yoke was bent in by the bolt. Wheels rub on yoke, making them more resistant to rolling. They need a spacer to keep them away from yoke and to give proper spacing to keep from bending yoke. Rest of unit is very good.


Looks good


the parts are great a lot heavier duty then I was expecting. I am very happy with the products. the only suggestion is to make it more clear on the parts that come with no mounting bolts so you know to order the extra hardware.


Excellent customer service


Great service! Fast shipping!!


etrailer is the best for what they carry. ive found things here that i cnt get anywhere else.
only issue i had was NOT finding an item, which i found in some obscure spot


As advertised. A good quality product. Easy install. Etrailer will be my "go-to " place for everything I need for my trailer.


A year in, still in great shape, stable, and easier to roll around than a single wheel.


Works like a charm and the 2 wheels make it easier to maneuver


Slightly heavier duty than the one it replaced. Easily installed.


Direct replacement, old jack off in 5 minutes, new jack on in 5 minutes.


Omg this is better than I thought. The picture does not do it’s justice. It is sturdier & stronger than I thought it would be. Not flimsy at all. What makes it even better is that I think it’s worth a lot more than I paid for it. This is definitely awesome for its price. I will buy another for my food truck soon. I’m a very happy customer. Ty guys


Item is well built and all parts where there to make assembly a breeze


I haven't installed it yet. Product looks very well built. Great service and follow-up.


Haven't installed it yet, but really like the set up, it should solve all my problems. Thanks



I have received everything and it is find AAA+

Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Recommended Replacement for Shelby 1,000 Lb Boat Trailer Jack
    If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual wheel jack for increased stability, the Round Swivel Marine Jack w/ Dual Wheel part # MJ-1500B-DWL which can simply be bolted to the frame once the old jack bracket is cut off. It has a zinc coating so it will be great for marine applications....
    view full answer...
    Image 1 for
  • Marine Grade Swivel Jack Certification
    There are currently no established standards for marine jacks like # MJ-1500B-DWL in the US. Europe does have the "CE" standard, but our jacks have not gone through that process. With that being said, we do fully test our jack design to insure that they meet (and in most cases) exceed the ratings that we assign to them. We also do periodic random testing from our production to ensure quality and meeting of the capacity limits. The Round Swivel Marine Jack w/ Dual Wheel # MJ-1500B-DWL...
    view full answer...
  • What Are the Dimensions of the Round Swivel Marine Jack with Dual Wheel
    The Round Swivel Marine Jack # MJ-1500B-DWL is roughly 25" total in length with the jack fully retracted. I've linked a diagram that shows the other important measurements that you might be interested in, as well.
    view full answer...
    Image 1 for
  • Dimensions and Diameter of the etrailer Round Swivel Marine Jack
    The etrailer Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K item # MJ-1500B-DWL you were looking at has an inner tube diameter of 2". The outer tube diameter is 2-1/4". I have linked an installation and review video. I have also linked a diagram with other dimensions.
    view full answer...
    Image 1 for
  • Recommended Trailer Jack with Lower Retracted Height for Landscaping Trailer
    I looked through our selection trying to find a similar jack to the MaxxTow MT70149 with a retracted height less than 14-3/4 inches and found a couple of good options for you. You didn't say exactly what height you need, however part # MJ-1200B has a retracted height of 12-1/2 inches. The weight capacity is slightly less, at 1,200 pounds but that's probably still plenty for your trailer. It also offers 11 inches of travel which is a 1/2 inch less than the MaxxTow. A second option is...
    view full answer...
  • Replacement Jack Handle for etrailer Jack # MJ-1500B-DWL
    If the jack you had was the part # MJ-1500B-DWL the correct handle is the part # MJ-1000B-HD. This jack is very common out there so it's most likely what you have but you'd have to look for identifying info on it to determine if it's correct or not.
    view full answer...
  • Can I Use the Round Swivel Marine Jack on a Yakima Rack and Roll Trailer
    Yes. The Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K Item # MJ-1500B-DWL will fit on trailer frames between 2" and 4" tall, so it will work on the 2" tall tongue of the Yakima Rack and Roll Trailer # Y08106. I've linked a short review video of the jack for you to have a look at.
    view full answer...
  • Will the Fulton F2 Trailer Jack # F1413020134 Fit a Trailer With a 2" x 4" Frame
    I do have a solution for you, but since the mounting brackets for the Fulton F2 # F1413020134 have specific bolt holes it won't be compatible with your 2" x 4" frame. Instead I recommend going with our Round Swivel Marine Jack # MJ-1500B-DWL which offers up to 10-3/8" of travel and is rated for 1,500 lbs. This jack is compatible with trailers that have a frame height ranging from 2" - 4" as you can see in the attached review video.
    view full answer...
  • Rebuild Kit for the RAM Round Swivel Marine Jack Part # MJ-1500B-DWL
    It sounds like you have the Round Swivel Marine Jack part # MJ-1500B-DWL which is the only 1,500 lb dual wheel, round trailer jack that I am aware of. If this is the case then you will want to use the Replacement Sidewind Handle part # MJ-1000B-HD and the Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part # MJ-1000B-GR. I have attached a rebuild video for you as well.
    view full answer...
  • Where is the etrailer Swivel Jack # MJ-1500B-DWL Manufactured?
    While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up...
    view full answer...
  • Recommended Trailer Jack for Easy Maneuvering
    The trailer jack I highly recommend is the Fulton F2 Swing-Up Trailer Jack # F1413020134 because of its large 7 inch dual wheels that have a wide base, roll independently and are grooved, as you can see in the accompanying photo. This jack is going to be your best option for easier maneuverability on a waxed, tile floor. The Fulton F2 is a bolt-on jack that has a 1,600 lb capacity, will give you 10 inches of lift height and comes with a lifetime warranty. I have added a link to a video...
    view full answer...
    Image 1 for
  • Replacement For Handle "Bushing" on Etrailer Marine Jack
    For the etrailer # MJ-1500B-DWL Marine Trailer Jack, if the "bushing" you are referring to is a small fitting that has a 1/2" round hole on the inside and is square shaped on the outside to fit in the square hole in the jack tube, then you can use the Fulton # F0933301S00 Replacement Handle Kit which includes that part. That part is not available seperately. If you additionally need the replacement cap on top of the jack you can order the etrailer # MJ-1500B-CP cap. Annually you should...
    view full answer...
  • Trailer Jack and Winch for 3,000 Pounds or Less Boat Trailer
    Since a jack doesn't need to hold the weight of the entire trailer it's pretty easy to get one rated for more than what you need. the 1,500 pound bolt-on swivel jack # MJ-1500B-DWL or 2,000 pound weld-on # TJP-2002S-B will be enough and are both great options. It's the same for a winch as well. The winch doesn't need to support the entire weight of the boat but needs to be strong though to pull it along your rollers. Being that you have rollers that will make it easier on the winch...
    view full answer...
  • Trailer Jack with Wheels to Make it Easier to Move Around a Trailer by Hand
    Standard trailer jack wheels are either plastic or metal so there isn't a rubber tire available. But we do have the Trailer Valet # STC-V211 which is both a jack and a trailer mover rated up to 500 pounds tongue. You may also be able to use mount # DL22144 which holds a spare tire but can also use that spare tire to make it a dolly. The only problem would be turning since this is a fixed position carrier. Another option is to use a different jack that has dual wheels. That would make...
    view full answer...

Do you have a question about this Trailer Jack?

  • Why

    At we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830