bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K
etrailer

etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K

Part Number: MJ-1500B
In Stock
$87.48
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion. Great Prices for the best trailer jack from etrailer. etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K part number MJ-1500B can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (851)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - MJ-1500B

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Bolt-On
  • 11 Inch Lift
  • With Wheel
  • etrailer
  • Steel

Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.


Features:

  • Supports, lifts, and lowers your boat or recreational trailer
  • Swings up and down smoothly
    • J-bolt handle lets you position jack quickly
  • Makes it easy to move your trailer in tight spaces
    • Caster turns a full 360 degrees
  • Resists rust and corrosion with clear zinc finish
  • Avoids winch posts, tool boxes, or other accessories mounted on your trailer
    • Sidewind handle lets you crank jack without your hand getting smashed
  • Creates a stylish flair with the spoked wheel
  • Bolts around trailer frame
    • Includes mounting bracket and hardware


Specs:

  • Application: trailers frames 2" to 4" tall
  • Lift capacity: 1,500 lbs
  • Bracket height:
    • Retracted: 13"
    • Extended: 23"
  • Screw travel : 11"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Handle radius: 6-1/4"
  • Wheel dimensions: 7-5/8" diameter x 2-1/16" wide
  • 1-Year warranty


Dims Bracket

How to Determine the Lift Capacity You Need in a Jack

A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.



MJ-1500B etrailer by Ram Trailer Jack - Swivel - Bolt On - Zinc - Side Wind - 11" Travel - 1,500 lbs





Customer Satisfaction Score:


Customer Reviews

etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K - MJ-1500B

Average Customer Rating:  4.8 out of 5 stars   (851 Customer Reviews)

Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.

by:

A decent jack. I have a small square drop camper which came with the 1,200 lbs version of this jack. Even with the jack all the way retracted there were times there wasn't enough room to swivel the jack into place because of the wheel and the site not being level. I was on the search for a bolt on replacement without a wheel. I could not find one. I ended up buying this jack due to the size of the drop tube (2"). I cut the wheel off, drilled a hole, and added the Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks. The problem of not being able to swivel the jack in place for those sites/places where the tongue is close to the ground is solved. For my application, minus one star for the non-detachable wheel.

Garret

7/10/2024

After a year, this tonguetrailer jack is still working well and as intended.



by:

Unlike others, this make and model maintains good function after about one year. The swivel is tight and without.slop despite use. The wheel continues to roll smoothly and effectively. It is a value for its price in my opinion.



by:

Received great customer service from Natalie who took my order. We discussed several options on repairing an old one, or just purchasing new. My old Jack was in pretty poor shape and by the time we got Parts pot enough to be able to repair it effectively, I would have spent almost as much to buy a new and 500 pound more capable Jack. She ask the correct questions about the length of the tube and how high the trailer needed to lift and what the weight ratings needed to be. Completely certain that I've got the right jack for the job. I am enclosing a picture with full approval of my two loyal Companions and completely aggravating dogs.

David

11/13/2019

One year out and the jack is still performing like it should. My boat was somewhat of a Trailer Queen while trying to get the old outboard running so I used the jack a LOT. Always did the task without ever giving it a second thought. Thanks again for all your help.



by:

Super reliable, we use these on all of our trailers.



by:

I am very satisfied with the quality of this jack stand, it is heavy duty and the large wheel makes it easier moving the boat around. The installation was very easy, a 9/16 deep socket and wrench and a 9/16 open end got the job done fast. I do recommend this product for any boater that is looking for a quality stand at a fair price.

Allen

4/18/2021

I am still very pleased with the jack stand.



by:

Product seems to be well made. The crank is smooth and so much easier than my old one that I was replacing. Even though I measured my old jack and this was suppose to be the same size, when it was mounted and trailer was lowered on my hitch it did not go low enough to swivel the jack arm to horizontal position. I rotated my receiver hitch ball mount which gave me enough height to swivel to horizontal position. Will just have to see how boat rides with the ball mount 2" higher. If the boat fails to ride good, I will look at finding a replacement wheel that is 4: instead of 6 inches



by:

Works great for my trailer.



by:

This item is just what I needed for my toy hauler. A very sturdy trailer jack and it has a wheel! I would buy this again



by:

Just what I NEEDED!



by:

Product is as described and is well constructed. Installation was less than 15 min. Delivery was fast and on time. I had to contact the help-desk to have a tracking notification sent to my email due to an error on my part. I contacted them through email about 15 min before closing and received a confirmation and updated tracking information correcting the error along with a follow up to see if I was satisfied. This was my first time using etrailer and I will becoming back for any future needs.

Bill

9/2/2020

Overall still satisfied with the product. Have had no issues to speak of and still operates as expected. I do use my trailer up through the middle of Dec so just a little salt issues, nothing major or alarming but it would be nice if there was a little better corrosion protection. Common challenge when running late season in MN and Ive yet to find a jack that doesnt show similar signs. I would still buy the product again.



by:

Don't know yet I have not used the trailer yet since I installed it



by:

Well built and very easy to install !



by:

The trailer jack was perfect! The bolt hole pattern was critical and it was exactly as advertised. Installed in 15 minutes with absolutely no alterations. The information provided on products sold at etrailer.com is the biggest reason I will keep coming back (not to mention quick delivery and great prices). The jack easily lifted my boat and trailer into position for hitching up. Hope the fish are biting!



by:

Great price offered by etrailer and fast shipping. The jack fit the trailer properly and works good. My only criticism would be there is a small amount of play in the rotating bracket which concerns me in regard to the longevity of the product. I suppose time will tell.



by:

Very happy with this trailer jack. Quality is decent even though it’s made in China. The oversized wheel allows me to push my 2000 lb trailer around effortlessly on packed gravel driveway.



by:

Replaced my worn jack on my Ranger boat and it has held up very well. Quality product.

Randall

6/27/2020

Been using for a year now and it is still functioning well



by:

Used this jack to replace the jack on my aluminum trailer that was stolen. It fit my 3"x3" aluminum square tongue perfectly. The wheel is a lot bigger than I expected but should work will in gravel.



by:

Great Product, we use the swivel jacks on our trailer builds and they hold up well. the Fulton Swing Jack is less sturdy in comparison.



by:

I installed on my trailer yesterday and really impressed at the quality of this unit. I have installed others in the past and nothing like this one. Great buy for the money



by:

Works like a champ



by:

Wow! Just received my trailer swivel jack and all i got to say is that it is built heavy duty! E Trailer shipped this item out to me fast!



by:

Kudo's to etrailer. Prompt delivery with the product received exactly as advertised. Price very competitive. I am a repeat customer because they are the real deal. Do business with etrailer in confidence for all your trailer needs.



by:

While I have not had a chance to go through the packages that arrived yesterday. I was pleasantly surprised that they did arrive way ahead of schedule. I also can not thank Katrina B. enough on her help with correcting my mistake with an online order. She was pleasant the whole time, and has followed up with me to make sure that everything is good. Once I get the packages opened and installed I will be writing another review on the parts. For my part Customer Service goes a long way in to making a happy customer. Thanks Katrina



by:

Big and heavy duty. Overkill for my 18’ boat but a lot easier to handle than the smaller ones.



by:

The packaging was very beat up. If any of the hardware slipped out, I will be giving you a call.


25
850
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Can Jack MJ-1500B Replace Shelby Jack
    The Round Swivel Marine Jack # MJ-1500B won't connect to the weld-on bracket of a Shelby jack; that said, you can still use it. This is a bolt-on jack, so as long as you have 6-7/8 inches of space somewhere on your trailer's frame (and its frame is between 2 inches and 4 inches tall), the jack will still fit. You will just use the mounting brackets and attach it directly to your trailer frame without any welding or drilling needed. I have added a link below to a video review for you...
    view full answer...
  • How Do Bolt-On Round Swivel Marine Jacks Mount to Trailer
    The Mounting Kit # MJ-1000B-MK is a replacement part for the Round Swivel Marine Jacks # MJ-1200B and # MJ-1500B which actually mounts to the side of the frame of your trailer instead of in the hole location in your A-Frame coupler area. As long as your trailer frame is 2" to 4" tall this bracket system will work for you. If you're needing a different style that mounts in an A-Frame I recommend either the manual # TJA-5000S-B or electric # EJ-3527-BBX. These have a 2-1/4" outer diameter...
    view full answer...
  • Replacement Cap for etrailer Swivel Jack
    We do have replacement caps available for swivel jacks. If this is an actual etrailer jack you need one of the following: -Replacement Cap # MJ-1000B-CP (for MJ-1000B Series) -Replacement Cap # MJ-1500B-CP (for MJ-1500B Series) I noticed you looked at Dutton-Lainson as well. If it is a Dutton-Lainson jack e have the following: -Replacement Cap # DL6602 (6800 Series Marine) -Replacement Cap # DL22354 (3400 and 6400 Series)
    view full answer...
  • Bolt Thread Size of Mounting Hardware for etrailer Round Swivel Marine Jack w/ Wheel
    The bolts for the mounting hardware that comes with the Round Swivel Marine Jack w/ Wheel # MJ-1500B have an overall length of 4 1/4" and the thread is 3/8-16 course threaded. If you are needing new hardware for this jack then we actually have that available as part # MJ-1000B-MBB.
    view full answer...
  • Dimensions for etrailer.com Round Swivel Marine Jack # MJ-1500B
    I was not able to obtain a 3D model or CAD drawing for the etrailer Round Swivel Marine Jack w/ Wheel # MJ-1500B referenced in your question. I did attach an image with some basic dimensions labeled that you can take a look at. Please also let me know if there are any specific measurements you are needing and I will be happy to go out to our warehouse and take them. This round swivel jack features a lift capacity of 1,500 pounds and an outer tube diameter of 2-1/4 inches. I have also...
    view full answer...
    Image 1 for
  • Replacement Bolt-On Side-Frame-Mount Swivel Jack to Replace Shelby 5876A8
    The Shelby 1500-lb trailer jack 5876A8 is not available but we do have options in other 1500-lb-rated side-frame-mount swivel jacks. You can see all such products on the linked page. For a similar option that offers bolt-on installation consider the Fulton # FXPD15L or the etrailer # MJ-1500B.
    view full answer...
  • Does Round Swivel Marine Jack Come With Mounting Hardware
    Yes, the Round Swivel Marine Jack # MJ-1500B does come with the mounting hardware and bracket, as you can see by the accompanying photo which shows the hardware included. This jack will fit trailers with a frame height from 2" to 4" has a 13" retracted height and 24" extended height with a 1,500 lb lift capacity. I have added a link to a video review of this jack for you to check out as well.
    view full answer...
    Image 1 for
  • Replacement Trailer Jack for 2009 Coachman Pop Up Camper
    We have a variety of replacement trailer jacks to choose from and from that linked selection I recommend checking out the Round Swivel Marine Jack w/ Wheel # MJ-1500B. This is a swivel jack rated for 1,500 lbs and has a bolt-on installation so it's something you can easily do at home with your own tools. This fits trailers with a frame height from 2" to 4" and offers 11" of travel for an extended height of 24" which should fit your needs just fine. If you end up needing a different style...
    view full answer...
  • Swivel Jack for Tear Camper With 2 x 2 Trailer Tongue
    You can use the Round Swivel Marine Jack w/ Wheel # MJ-1500B for your tear camper. This fits trailers with a frame height from 2" to 4" and has a capacity of 1,500 lbs. It has a bracket height of 13" when retracted and 24" when extended which means an 11" lift. This has a bolt-on installation so no welding is required.
    view full answer...
  • Does the etrailer Round Swivel Marine Jack Have Same Bolt Holes as Fulton F2?
    The etrailer Round Swivel Marine Jack, # MJ-1500B may replace a Fulton F2 depending on your current bolt hole dimensions. The Marine Jack has eight different bolt holes, as you can see in the photo I've attached. The mounting bracket itself is 6-7/8" long x 5-3/4" wide, and the hole dimensions are the following: - 5-1/2" from center of left holes to center of right holes - 2-7/16" from center of top hole to center of nearest hole - 3-7/16" from center of top hole to center of middle hole -...
    view full answer...
    Image 1 for
  • Recommended Trailer Jack With Wheel for 2.5 x 2 Inch Trailer Tongue
    For your 2.5 inch wide and 2 inch high trailer tongue, the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,500 lbs # MJ-1500B is my recommendation. It will work very well with the trailer tongue you have and will give you 11 inches of travel from the 13 inch retracted height. I've attached a photo to assist as well as a couple videos.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Swivel Trailer Jack To Replace 1,200-lb Shelby Jack
    The Round Swivel Marine Jack w/ Wheel - 1,500 lbs Item # MJ-1500B will probably fit your hole pattern. If it does not then it comes with a mounting bracket with different mounting options. The mounting bracket is 6-7/8 inches long x 5-3/4 inches wide. The mounting hole options are: 2-7/16 inches from center of top hole to center of nearest hole 3-7/16 inches from center of top hole to center of middle hole 4-7/16 inches from center of top hole to center of bottom hole The Jack has...
    view full answer...
  • Replacement Sidewind Handle for RAM 1500 Swivel Jack
    For your RAM 1500 swivel jack you need a handle that matches the 1,500 lb capacity. The correct replacement handle is the Replacement Sidewind Handle for etrailer and Ram Swivel Marine Jacks - 1,500 lbs # MJ-1500B-HD.
    view full answer...
  • Can The Wheel be Replaced With a Foot On The Round Swivel Marine Jack # MJ-1500B?
    As the wheel mounts are welded on the Round Swivel Marine Jack # MJ-1500B you would have to cut them off and weld on a plate for this jack. We do have the Round Snap Ring Swivel Jack # TJBB-2001-B which also fits trailers with a 2" to 4" tall frame but comes with a 7-1/2" x 3-3/4" footplate rather than a wheel.
    view full answer...
  • Could Round Swivel Marine Jack # MJ-1500B Replace Shelby Jack
    Yes, the Round Swivel Marine Jack # MJ-1500B that you referenced is a similar jack to the Shelby you have and would work well as a replacement. It has a higher capacity of 1,500 lbs so it will crank easier as well.
    view full answer...
  • Diameter of Wheel Center Hole of etrailer.com Jack part # MJ-1500B
    The wheel of the etrailer.com jack part # MJ-1500B is the part # JWK-8P which has a center hole diameter of 5/8 inches. There's a bushing that fits into the wheel where a 1/2 inch bolt fits into as well.
    view full answer...
    Image 1 for
  • Recommendation to Replace 1,500 Pound Swivel Jack on Trailer
    To replace the frame mount jack on your trailer, I recommend taking a look at the etrailer.com Round Swivel Marine Jack # MJ-1500B. This swivel jack has a 1,500 pound lift capacity, and it measures 13 inches when fully retracted and 24 inches at full extension (11 inches of total travel). The mounting bracket for installing on 2-4 inch tall frames is included. This jack should work perfectly as a replacement to the one you have pictured. I have attached a short video demonstration on...
    view full answer...
  • Trailer Jack with 1,500 lb Capacity for 2 inch Trailer Frame
    While the cost of the Round Swivel Marine Jack # MJ-1500B is relatively low it still is a quality trailer jack. We get a special price on this since it's our house brand of jack but it will function and last just as long as the other more expensive trailer jacks. This also fits a 2 inch trailer frame like you have so in that regard it would work great for you.
    view full answer...
  • Recommendation For Replacement Trailer Jack For 2000 Mastercraft Boat Trailer
    The Round Swivel Marine Jack with Wheel, Item # MJ-1500B, comes close to the dimension you sent and has several different mounting options. The mounting bracket is 6-7/8 inches long x 5-3/4 inches wide. The mounting hole options are: 2-7/16 inches from center of top hole to center of nearest hole 3-7/16 inches from center of top hole to center of middle hole 4-7/16 inches from center of top hole to center of bottom hole 5-1/2 inches from center of left holes to center of right holes This...
    view full answer...
  • Best Replacement for Snap Ring Shelby Trailer Jack
    I do have an option for you but Shelby trailer products have been out of business for some time now and there are no direct replacements that will reuse their mounting bracket. The best and easiest option we have for you would be to remove the jack and just use a bolt-on option on the remaining available frame, the Round Swivel Marine Jack w/ Wheel part # MJ-1500B is what I recommend. The other option would be to cut the old bracket off and weld a new one on but most just go with the bolt-on...
    view full answer...
  • Replacement Trailer Swivel Jack for Trailer with Two 3500-lb Axles
    Trailer tongue weight (TW) is usually around 15-percent of gross trailer weight. If your trailer is a car hauler with two 3.5K axles, the jack capacity I suggest is 1500-lbs. You can click on the linked page to see all 1500-lb-rated swivel jacks. For a cost-effective bolt-on swivel jack you can use the etrailer # MJ-1500B. This jack fits frames from 2- to 4-inches in height and it provides 11-inches of travel.
    view full answer...
  • Recommended Bolt-On Swivel Jack for 5K Food Trailer
    I recommend using the 2K Round Snap Ring Swivel Jack w/ Footplate # TJBB-2001-B OR the 1,500 lb Round Swivel Marine Jack # MJ-1500B if you'd like a jack with a wheel. Both of these are cost-effective options that are still quality products. The 2K jack has an extended height of 21-1/2" while the jack with a wheel has an extended height of 24". Every bumper pull trailer should have a tongue weight that is no less than 10% or no more than 15% of the weight of the trailer. Since your 5K trailer...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Ryan F
Updated by:
Ryan F
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.