bing tracking image
  1. Trailer Leaf Springs
  2. TruRyde
  3. Double Eye Springs
  4. 27 Inch Long
  5. 3500 lbs
  6. 4 Leaf
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
TruRyde

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long

Part Number: TRU62FR
In Stock
$42.82
Trailer Leaf Springs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from TruRyde. 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long part number TRU62FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (1)
  • Photos

TruRyde Trailer Leaf Springs - TRU62FR

  • Double Eye Springs
  • 27 Inch Long
  • 3500 lbs
  • 4 Leaf
  • 1-3/4 Inch Wide
  • TruRyde

USA-made leaf spring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer
  • Made in the USA


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 1,750 lbs
  • Axle capacity: 3,500 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 27"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 4


Double-Eye Leaf Spring Basics

Leaf springs, as you probably know, make up an important part of your trailer's suspension. Their main purpose is to absorb road shock as you travel, as well as allow your axle(s) to move independently of the rest of the trailer.


Double-Eye Spring Parts

To mount this leaf spring, you'll need hangers welded onto your trailer frame - which you probably already have in place - as well as shackle straps and a suspension bolt. It's a good idea to replace your existing straps and bolt while you're under there working on things because they tend to wear out quickly. One thing that could help keep them from wearing out too fast would be upgrading to galvanized or zinc-plated hardware. Doing so will boost the corrosion resistance and, therefore, the longevity of your trailer.


We also always recommend replacing both of your springs at the same time because it's not unusual for leaf springs to sag and elongate over time. If you replace just the one, there's a good chance that it won't match your existing spring on the opposite side of your trailer, and that can mess up your alignment.




93185 TruRyde EMCO Double Eye Trailer Leaf Spring - 4 Leaf - 1,750-lb Capacity

Compare to e97SR





Video of 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU62FR

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this 27 inch long four leaf double eye spring for 3,500 pound trailer axles. Now, this leaf spring here will act as part of your trailer suspension system, it provides the attachment point for your trailer's axle. This is for a quantity of one leaf spring. The number of leaves we mentioned is four.

Spring capacity on this leaf is 1,750 pounds. So when this is matched with one on the other side of the axle, it'll meet your 3,500 pound axle capacity. Now, the multiple leaves here allow flexibility to absorb any road shock. Allows for a nice smooth ride that'll reduce wear and tear on the trailer, ensures a level ride on bumpy and uneven surfaces. It is a sturdy steel construction.

If you look on each eyes right here, they do include the nylon bushings. Now the pre-mounted hangers are the aftermarket hanger kit, which is required for installation. Those items we do sell separately on our website. Basically, this spring attaches to the hanger that's mounted on your trailer frame at one end, and then the other end connects to shackle straps suspended from your hanger equalizer. Now, the length is always measured from the center of one eye to the center of the other.

So if we get our tape measure, we go center to center, measure 27 inch measurement, the spring width, 1 3/4 inches. And the eye diameter with the bushing included is 9/16 of an inch. But that should do it for a look at the 27 inch long four leaf double eye spring for 3,500 pound trailer axles.

Customer Satisfaction Score:

0
0

See what our Experts say about this TruRyde Trailer Leaf Springs


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Ryan F
Written by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.