bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Slipper Springs
  4. 26-5/8 Inch Long
  5. 7000 lbs
  6. 2 Inch Wide
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long

5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long

Item # e74SR
Our Price: $79.99
Trailer Leaf Springs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long part number e74SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (36)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e74SR

  • Slipper Springs
  • 26-5/8 Inch Long
  • 7000 lbs
  • 2 Inch Wide
  • 5 Leaf
  • Painted
  • Hook End
  • etrailer

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushing included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Eye of spring attaches to hanger mounted on trailer frame
    • Slipper end slides into hanger or equalizer


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 3,500 lbs
  • Axle capacity: 7,000 lbs
  • Length from center of spring eye to end of spring (unloaded): 26-5/8"
  • Spring width: 2"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 5
  • Additional dimensions: see table


Hook End Slipper Spring Diagram

Part NumberABCDEF
e74SR11-1/4"22-3/4"26-5/8"12"16-1/16"3-3/16"


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.


Slipper leaf springs attach to hangers that are welded onto your trailer. The eye of this spring will attach to the front hanger with a suspension bolt. The hooked slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs. The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.


To mount this spring, you will need hangers, a suspension bolt, and possibly a spring keeper bolt, depending on the design of the rear hanger. If you are simply replacing a spring, you may still have hangers welded onto your trailer, but it would be wise to replace the bolts as they can experience wear. It is also recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.


If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.



e74SR etrailer Slipper Trailer Leaf Spring - 5 Leaf - 3,500-lb Capacity

Compares to SP-232275





Customer Satisfaction Score:


Customer Reviews

5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long - e74SR

Average Customer Rating:  4.8 out of 5 stars   (36 Customer Reviews)

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.

by:

Without etrailer the ability to call for help finding the right parts and the ultra fast shipping my trailer be part less right now.
Thanks everyone at Etrailer! Thank you for knowing what I needed without seeing it. Thank you for everything!



by:

Trailer went back together no problem hauling cattle!!



by:

Super easy to place order and the customer service is tops!



by:

The chat option helped with finding the items we needed. Loved the online videos. Item shipped promptly with great communication. Excellent customer service.



by:

Right fit first time thanks



by:

Good quality.



by:

very frustrating, I ordered one spring and two bolts. Only one spring showed up. I called and asked about the bolts, they shipped one Bolt. Now I'm waiting on the second bolt. My customer is very mad!!!!



by:

Perfect fit!!



by:

Very fasted shipping very good place to buy from



by:

Made in China is the only draw back



by:



by:



by:



by:

Worked as expected



by:



by:

Quick,fast, & easy…that simple.



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
36
Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • Can I Switch From 5-Leaf Slipper Springs to 7-Leaf Springs?
    You can switch from a 5-Leaf # e74SR to a 7-Leaf # e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the # MR66ZR which are 7-3/4" tall.
    view full answer...
  • Weight of 5 Leaf 7,000 lb Slipper Spring
    The 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long # e74SR shipping weight is 19 lbs so the spring will be around 18 lbs.
    view full answer...
  • Is the 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles Equivalent to the 1203T3 Spring
    The 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles # e74SR is equivalent to the 1203T3 and is listed as its replacement. This 5 leaf spring measures 26-5/8" long and has a capacity of 3,500 lbs. As noted down below on the product page, to ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
    view full answer...
  • Replacement 7k Slipper Springs and Hanger Kit for Triple Axle Trailer
    Sounds like it's a good time to go ahead and replace all of your 7k slipper springs with the part # e74SR and use a slipper spring triple axle hanger kit part # AP316-H302 that you referenced and you'd be set to make the modifications you are wanting.
    view full answer...
  • Proper Configuration of Trailer Suspension Components
    The proper configuration of trailer suspensions is shown in the linked article. In a triple-axle set up on each side of the trailer there will be a total of four spring hangers welded to the trailer, two equalizers and four sets of shackle straps. Please refer to linked photo taken from the article. I also included an article concerning axle placement on trailers and a link to our main page for all trailer suspension parts.
    view full answer...
    Image 1 for
  • Recommended Slipper Spring And U-Bolt Kit For Trailer With 7,000 Lb Axle
    We have just what you are looking for. The slipper springs we offer for a 7,000 lb axle are part # e74SR. This is a 5-leaf spring that measures 26-5/8 inches long and 2 inches wide. It is always recommended to replace both sides of the trailer suspension at the same time to make sure they wear evenly and support the trailer evenly as well. You can check out the attached photo with the dimensions noted for the leaf spring. When checking the dimension of the spring you will want to check...
    view full answer...
    Image 1 for
  • Will Dexter Tandem-Axle Trailer Hanger Kit # HAP-105-205-01 Fit Dexter 7000 Axles on Dump Trailer
    If you have 2 inch wide 7k slipper springs like the part # e74SR and your current axles are 38 inches apart on center the hanger kit part # HAP-105-205-01 that you referenced would be what you'd need.
    view full answer...
  • TRAILER SPRINGS
    For the large 8000 lb. springs you want to use U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles part # APUBR-35 and for the smaller 3500 lb. springs use the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles part # APUBR-1. Thes will give you the u bolts, nuts and the new plates so you will be set.
    view full answer...
  • Mounting Dimensions for Slipper Leaf Spring e74SR and Tandem Hanger Kit APT6SE
    With the 26-5/8 inch long leaf spring part # e74SR you referenced and the hanger kit part # APT6SE you also mentioned the dimensions in the chart you referenced would be correct to use. The distance between the front and center hanger should be 28-1/2 inches, distance between center and rear hanger 29-1/2 inches, and the distance between axle centers 33 inches. This will then put the distance from the trailer frame to the axle center right at 4-1/2 inches.
    view full answer...
  • How to Determine if Leaf Springs Will Work on 7,000 lb Trailer Axle
    We may have an option for you but don't have any way to know the current suspension or leaf springs you have on your current trailer axles. The two leaf springs we carry for a 7,000 lb axle are: - Double-Eye Suspension: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR - Slipper Spring Suspension: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long # e74SR In order to determine if these will fit you will need to measure the length from...
    view full answer...
  • Recommendation To Replace Slipper Spring And Bushings
    Yes, you will need to replace the spring with something like Item # e74SR. It is best to replace all springs at the same time so that you have even support and maintenance for the trailer. We do not carry 2 inch never fail bushings. I contacted Lippert Components who manufactures never fail bushings and they do not have a 2 inch option available at this time. It also sounds like you have a new axle. Your hubs and axle shaft/spindle should work together so long as the bearing numbers...
    view full answer...
  • How to Determine Correct Replacement Springs for a 2019 Keystone Fuzion 424 Toy Hauler with 7K Axles
    I was able to find that your 2019 Keystone Fuzion 424 Toy Hauler has 7K axles and while we do have leaf springs for 7K axles, you'll need to take some measurements of your leaf springs to ensure that you get leaf springs that are the correct length for your application. Height can be a factor as well unless you are swapping out all of your leaf springs on all of your axles. If you are referring to suspension enhancement we have that too. Unfortunately we don't have a way to look up exactly...
    view full answer...
    Image 1 for Image 2 for
  • Measurements for 5-Leaf Slipper Spring w/Hook End for 7,000-lb Trailer Axles e74SR
    The B measurement for slipper spring # e74SR is from the center of the eye to the part of the opposite end where it levels out after the bend. The spring eye center to the end is 26-5/8 inches. The overall length would be about 27 inches. With worn springs they will flatten out some and have slightly different measurements than a new spring. That is likely what is going on here. Out of the available options for 2 inch wide slipper springs for 7,000 pound axles # e74SR is the best option...
    view full answer...
    Image 1 for
  • Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
    The spacing is going to depend on the size of your tires, so let's start with that. For a 16 inch wheel/tire combo with an 8 on 6-1/2" bolt pattern the best option is a ST235/80R16 size tire with a load range of G to handle the capacity of your trailer. . A ST235/80R16 tire will measure nearly 31 inches in diameter so if your axles centers are spaced 36 inches apart you will have plenty of room. For the slipper springs you were right on with the 5-Leaf Slipper Spring w/ Hook End for 7,000-lb...
    view full answer...
    Image 1 for
  • Which Leaf Springs for 7000-lbs Axles
    You're going to choose the correct leaf spring replacement based off of the type of spring (either double eye or slipper), the capacity and the length of the spring; the spring pack size is mostly inconsequential. It looks like there is only one option available for 7000-lbs springs in double eye and slipper springs, but I do still recommend measuring to confirm that your existing springs are close to these (within an inch of so). If you've got a double eye spring that is around 25" long...
    view full answer...
  • How to Measure Leaf Springs on a 2020 Forest River Cherokee Alpha Wolf 26DBH-L
    While we do have a way to measure your leaf springs, we do not have the specs that show the exact leaf spring size on a 2020 Forest River Cherokee Alpha Wolf 26DBH-L. With that being said, you can definitely figure out the measurements you need on your trailer. The measurements you need depend on if you have double-eye leaf springs or slipper springs on your rig. If you have double eye springs, here is the information we need: - number of leaves needed - axle weight rating - length...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Slipper Spring to Replace Dexter 072-032-00 Spring
    I did a little research and found that slipper spring # e74SR does have similar specs and measurements as Dexter spring 072-032-00. Both are 2 inches wide, 5-leaf slipper springs but # e74SR is 26-5/8 inches long with 3,500 pound capacity for 7,000 pound axles.
    view full answer...
    Image 1 for
  • Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
    If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will be very stiff and can cause a very rough ride on the trailer. For the best ride I recommend sticking with the recommended size # e74SR and I do recommend replacing all of the springs at the same time to avoid uneven wear.
    view full answer...
  • Converting from Double-Eye Leaf Springs to Slipper Springs on my Triple Axle Trailer
    When looking to convert your triple axle double eye spring trailer to slipper springs, I recommend going with the 5-Leaf Slipper Spring, # e74SR, for your 7,000 LB axles. This spring has a 3,500 LB capacity, an axle capacity of 7,000 LBS, and the height of this spring is the same as your current 6-Leaf Double-Eye Spring, # e64SR. When it comes to whether there will be a change in the ride height when switching from double eye springs to the slipper springs, this is going to depend on the...
    view full answer...
  • Replacement Triple Axle Hanger Kit for 2015 Kaufman Car Hauler with 7k Axles
    What you have is a slipper spring setup on your 2015 Kaufman car trailer. So what you need for a triple axle hanger kit then is the part # APTT6SE which comes with everything needed. If you need new leaf springs too you'd want the 7k rated part # e74SR for each one.
    view full answer...
    Image 1 for
  • Correct Spacing for Triple-Axle Trailer Hanger Kit for 2 Slipper Springs with 10-1/8 Equalizers
    We sure can! The spacing you're looking for between the hangers for the Triple-Axle Trailer Hanger Kit for 2" Slipper Springs # AP302-H302 is 28-1/2" for the first to second hangers, 33" from the second to third hangers, and then 28-1/2" from the third to the fourth hangers. This would allow you to use a 2" slipper spring like the 5-Leaf for 7K Axle # e74SR. When it comes to exact placement of the hangers on the trailer frame that's something you'll have to play with to get the correct...
    view full answer...
  • Could Slipper Spring # e74SR Fit 2013 Kaufman EZ4
    If your 2013 Kaufman EZ4 trailer has a 7,000 axle and uses slipper springs that are 26-5/8 inches long then the leaf spring part # e74SR that you referenced will fit and work well. We don't have a way of looking up what your trailer's suspension has so I am unable to find that info for you.
    view full answer...
  • How to Measure for Replacement Silpper Springs for 12K Trailer
    Given the description, it sounds like you have a slipper spring suspension. The # e74SR springs you looked at are a likely replacement, but it's best to get a correct measurement. Generally speaking, you'll want to measure from the center of the spring eye to the highest point of the slipper end, as well as to the end of the spring, as shown in the provided photo. Because leaf springs tend to flatten out as they age, you'll want to take your measurement with the trailer up on jack stands...
    view full answer...
    Image 1 for
  • Slipper Leaf Springs, Equalizer and Wet Bolts for 2009 PJ Dump Trailer 7 x 14 14K
    Yes, the leaf spring part # e74SR would work great on a tandem axle 14k trailer like your PJ dump trailer. The equalizer part # TREQ4541 is the correct one to use as well with this spring and trailer. For wet bolts you'd need the part # TRFA71063 for a 7/8 inch center bolt and then part # 126B2 for the 9/16 inch bolts and you'd be set.
    view full answer...


< Previous
12




Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S
Employee Ryan G
Installed by:
Ryan G
Employee Andy C
Installed by:
Andy C
Employee Ethan H
Video by:
Ethan H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.