Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rectangular LED trailer light with 22 diodes provides stop, turn, and tail light functions and an incandescent license plate light. Durable black polycarbonate base. Surface mounts to driver side of trailer with included bracket. 3-Wire pigtail.
Features:
Specs:
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Average Customer Rating: 4.7 out of 5 stars (98 Customer Reviews)
Rectangular LED trailer light with 22 diodes provides stop, turn, and tail light functions and an incandescent license plate light. Durable black polycarbonate base. Surface mounts to driver side of trailer with included bracket. 3-Wire pigtail.
Tail light delivered on time and easy to install . LED’s much brighter and visible than the original incandescent bulb.
Nice lights!
1st light had a problem but etrailer replaced it. New one works great. Etrailer customer service is the best thank y’all
I don't typically do this but when you purchase a $55 light one would think it would come with hardware. To all those who may be considering this light as a replacement for your current light keep the old screws you'll need them.
Kate and Dave did an excellent job on the phone service. I will call him next time when I need parts.
Still wrks!
Great product
Had exactly what I needed. Delivery was super fast.
easy installation, and great lighting. So far, so good.
Just received the lights and will be installing this week. They arrived in great condition and well packaged. These are replacements for original Bargeman lights on my 21 yr old trailer and will complete my update to all led lighting. Noted that license plate light is not led and at the price of these lights it should have been. I have a led bulb that will fit and I’ll make that changeover. Otherwise these look exactly like my current lights and should be a quick change and provide much better lighting. Thanks etrailer for a nice product and fast service.
I've had these tail lights installed for about a year. They are much improved over the original tail lights. They are plenty bright and I haven't had any issues with them. They were easy to install and I sealed around them with caulking.
Delivery was on or before the date provided when I ordered. Products arrived extremely well packaged.
This is a nice, bright tail light BUT it does not have a clear lens illuminating the licence plate. The are slots for a clear lens in the mounting plate. I called eTrailer and was advised the fixture does not come with a clear lens for the licence plate bulb. This is not a true LED fixture as the bulb that illuminates the licence plate is an incandescent. The tail, turn brake, running lights are all LED.
I Would not recommend this tail light assembly only because it does not have a lens for the licence plate - this large opening will allow road debris, moisture, etc to enter the fixture.
I made my own lens and in the process of fitting, and fine tuning the fitment, broke one of the tabs holding the main lens. Nothing a dab of clear silicone didn’t remedy.
Purchased to replace taillights on an old Pop-Up. Easy to install. I used solder and shrink tubing. Quality is OK for all plastic housing. There was some damage from shipment but it appears from worse than usual handling as the carton was crushed. etrailer Customer Service was great, 5 stars, in getting me a replacement. Time will tell on durability but for now everything looks good.
So far I haven't mounted the light on my trailer but did hook it up to my trailer plug on the truck. Wanted to see how bright it was and if there was hyper-flashing. Brighter than I thought it would be and there is no hyper-flashing. So I am happy. Bought one for each side (not a license bracket).
Taillight for our travel trailer was exactly as advertised, came quickly, and a year later is still in great shape. I would recommend etrailer for any of you trailering (is that a word?) needs!
I was replacing my original Command Electronics tail lights with their LED version. All went well but I did need to reroute the wires in the new lights through some other hole/slot in the back of the light unit since they came out toward the left side rather than the middle of the unit. They look and work great.
Gwen with etrailer was the Epitone of what customer service should be! The lights arrived right to my doorstep as promised and the quality is second to none! Of course this the why I will continue to shop etrailer
Etrailer is a very good place to buy your trailer parts. Everything I bought from them so far has been quality. The only thing I was disappointed in was how long it took to get the stuff I ordered (but it was free shipping so I shouldn't complain)
A perfect fit to replace the original camper taillights. So much brighter with LEDs than with the old bulbs. Placed order on a Sunday and received on Wednesday. Light was exactly what was promised. Will definitely save this web site for future orders.
Purchased these and LED tail lights. Easy to install and the video was so very helpful.
The lights are still working great. These units were easy to install and are much brighter than the original lights from the manufacture.
The lights look good, I only wish they came with foam strips on the back to seal the light against the camper wall.
Very nice looking, the LED’s you can see from a good distance. Our RV only had bulbs that you couldn’t see, that’s the reason we changed them.
Good looking light fixture and easy to install on my travel trailer. Much brighter than the old light. Feel safer now when traveling.
Work great.
Works perfectly!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gerald
9/2/2024
Still working just fine!When installing, make sure you put a bead of caulk around part to keep moisture out.