Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or a clearance light when properly mounted. Clear lens over Amber LEDs. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (100 Customer Reviews)
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or a clearance light when properly mounted. Clear lens over Amber LEDs. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.Very bright and nice lights along with a great lifetime warranty!
They look great and work flawlessly. Very happy with these lights. I definitely recommend.
1 year review, good quality, bright attractive LED look and still holding up on the boat trailer.
Exactly what I needed for my boat trailer. Got here quick and was easy to install.
The led light are bright and work well for the most part. I have changed a few in the last couple of years. The housing on some are not quite sealed properly. Water gets in and out they go. 1 of 3 lights replaced worked for a few months and then water found its way in.
Overall they or good. If you rtv the seams and seal them yourself, they will last a long time.
Marker lights look just fine
Was looking for an exact match to replace a few of my clearance lights on my trailer.
With the help of a young lady on the customer assistance line, she found the perfect match!
Received the lights yesterday, and mounted perfectly in the same spot as my old ones.
Thanks for the outstanding customer service!
The LED marker lights were exactly what I was looking for. Installation was quick and easy. Great product. Great service.
Good replacement parts. Company provided tracking number and updates.
The lights are awesome. I used four of the amber and two red ones for clearance lights on a trailer that i built for a friend, along withe the clear lens tail and turn lights made for a hreat look. Very happy with etrailer and there service. I will reorder for my next project for sure. Thanks
I love these lights. They compliment the other leds on my truck and camper. I installed these on the running boards.
I purchased 3 of these lights to build a "raptor" style grill light system for my 2016 F350. They are a perfect match to the factory Ford running lights and work great!
These lights were exactly as described. They are extremely bright for the size. Highly recommended for any body looking to add style and brightness for there trailer.
Direct replacement for my trailer. Easy install.
These little lights are fantastic! They're small, but very bright. I bought these LED marker lights to replace the other LED marker lights (on my aluminum boat trailer) that actually broke because they used the mounting screw as the ground. The plastic became brittle and broke away from the screw on one of the lights and it just dangled by the brown wire.
I specifically bought these lights because they have two wires instead of a mounting screw for ground -- and they were cheaper! I just rewired my entire trailer and ran a separate ground wire to each light, thus removing all grounding from the trailer, and using the truck as ground. Now I don't have to worry about the effects of electrolysis or galvanic corrosion when I dunk my trailer in the salt water since I removed any chance of potential.
Just for cosmetic reasons, I also mounted these lights onto small pieces of plastic (Starboard) before I mounted them to my trailer.
Unfortunately, it's raining right now so I'm not going to submit any pictures of my installation.
Chris R.
8/25/2018
Fantastic1 i couldnt be happier with these lights. I use my boat a LOT and Ive had zero problems. None!
One year later and still going strong.
Purchased these because I wanted a little extra night time visibility.
I use these lights to help see my tires at night on my camper. They are mounted on the bottom of camper between the axles. Mounted here they get all of the road spray and rocks coming off of the tires. They are holding up well, there is no moisture in the lens at all. As a added benefit they help when setting up at night. You are able to see where to put the leveling blocks and chocks without a flashlight. I would buy these again when needed.
Excellent little lightIn case it was missed in the description this is a 2 LED light. The lens spreads the light acceptable and it makes a great running light.
The wires are attached right next to each other directly in the center of the back of the light making extensive drilling and connectors unnecessary. I do wish that black machine mounting screws were available as the screw wholes are a slightly odd shape (tough usable).
Light output is great for nighttime operations and will drastically increase visibility over a reflector but do not expect super bright daytime operation.
Also if the unit does not appear to work try switching the leads my black was power with white as ground. A bit odd but not a real problem.
Well sealed unit. Exact match for other lights on my trailer. Added more side lights for increased visibility.
Thanks for the opportunity to comment regarding the recent order from "etrailer" for your lighting products. The items arrived in good condition. The items seem to as advertised. It's very nice to have an organization such as yours to meet the needs of the motoring/trailering community. Your prices are reasonable and your products are of excellent quality.
I used these on my running boards. They look great and have been functioning flawlessly.
Used these as marker lights along the bottom of the rockers on my pickup. Have been working and looking great for a year now. They do get some moisture in them, but doesn’t seem to affect them so far.
I have not had these lights very long, but them seem to be high quality. And at just under 50mA each, the circuit load will be substantially reduced with this upgrade.
Rated 4 stars since I have yet to evaluate their durability.
Wanted toads more to our trailer and they are awesome. Love etrailer products.
I replaced the lights on my boat trailer one year ago and haven’t had one go bad yet.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
12/15/2018
Follow-up, one year later. The LED marker lights are performing great. the lights are just as bright as new with no discoloration. Excellent product.