5-3/4" x 1-9/16" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to show you Optronics Sealed Miro Flex Star LED Side Marker and Clearance Light part number MCL19RB. The lens of this light is sealed and waterproofed against the housing. Inside are 4 red LEDs that draw a total of .080 amps at 12.8 volts. The LEDs inside are also covered by a lifetime warranty from Optronics. The light utilizes a 2 wire design meaning one wire will act as your electrical ground and the other wire will make your power connection. There is also a snap on plastic chrome cover to dress up the light. Next we are going to hook the light up to a power supply so you can see how bright the light is. We will connect one wire to ground and the other wire to power. Next we will turn off the overhead lights so you can see how bright the light is. And that does it for Optronics Sealed Miro Flex Star LED Side Marker and Clearance Light part number MCL19RB.
Average Customer Rating: 4.8 out of 5 stars (1781 Customer Reviews)
5-3/4" x 1-9/16" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.great
Excellent!
excellent!
Looks very nice on the trailer.
Good quailty. Looks great.
Excellent product! Thank you etrailer!
nice part, a little pricey
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.