Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-5/16" Round. 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. Accepts industry-standard 3-prong plug.
Features:
Specs:
This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
Recessed-mount trailer lights install underneath a housing or a grommet (A45GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1368 Customer Reviews)
4-5/16" Round. 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. Accepts industry-standard 3-prong plug.
Worked exactly as advertised
Communication with etrailer has been really good.This item was back ordered and they let us know immediately.
The grommets fit well into the holes and the lights pop in snuggly.
solid lights, perform well and are easy to install- I'd rather they were made in the USA []
Etrailer makes it easy to find hard to find items, their follow up communications and prices are great.
Everything fit well and is still working after 1 year of light use (no pun intended).
Being in business for 45 years it is great to find a company that has the knowledge of the products and excellent service. Great product lines. A+
Item received in just 48 hrs. Item was very close match to one being replaced. minor difficulty getting into existing hole, however once installed worked very well. I will soon replace the opposite side on vehicle to have a matching VERY bright set.
Nice and bright
I gave 4 stars because I really thought they’d be brighter for backup lighting. They definitely do help in letting others know you’r intentions from behind.
We installed these clearance lights on a 16-foot tandem axle trailer a year ago that is primarily used for hauling firewood. We use it in the forest and most of the road miles are gravel. Since the lights are not housed in a recessed light fixture, we made one of steel pipe with the leading edge extended ¼ inch to deflect flying road rocks and running through brush in the forest. All the wiring under the trailer is in conduit and all the wiring is Ancor brand marine grade. Had we installed the lights as demonstrated in a picture on the etrailer.com web site, the lights would have been damaged quickly in our service conditions. The Led lights are working fine although they run a bit hotter than preferred which may lead to a shortened life. Tip: Never use copper clad aluminum automotive wire from China on trailers as aluminum is the sacrificial metal for cathodic corrosion and the wire conductors will soon disappear into powder.
Love how bright they are. If you are planning a surface mount, as I did, you probably won't want a pigtail. Space was at a premium and my access holes are small. I just cut the connector leaving 3 inches and tied into the existing bundles.
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.
I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
a little loose in the side marker bracket, but easily solved with a wiretie.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
10/25/2022
I see that you gave your experience with etrailer 1 star. If you give me more information about why you are disappointed in us, I will be happy to assist you.