7" Diameter. Waterproof, LED transit tail light with 32 diodes provides stop, turn, and tail functions. Built-in reflex reflector. GloLight lens creates a solid panel of light. Surface mount with included gasket. Accepts male AMP-style plug.
Features:
Specs:
This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the round seven inch glow light three function LED transit light.Now this is a nice round trailer transit light that'll serve three functions, tail light function, brake light function and your turn signal light function.This one happens to be a glow light design. This glow light lens will create a nice solid light pattern, it's a nice smooth appearance. The outer band of LEDs will function as a turn signal and brake light and that solid section, the glow light part will act as a tail light.I am going to hook this up to some power in the end of the video here just to show you how bright it is.This is a sonically sealed waterproof housing and lens unit. It is submersible. It's a polycarbonate housing and an acrylic lens and this light does use the SMT technology, which is surface mount technology.It's a durable construction of the LED circuit board. Helps better withstand shock and vibration, allows improved heat distribution and thinner construction.The LEDs of this light will make great replacements for incandescent lights because they'll last 50 times longer, they're more efficient, they'll provide brighter light with less power output and of course no bulbs to replace, no brittle filaments to break and there is a lifetime warranty on the LEDs.This is a red lens over 32 white LEDs.
It is designed to Mount on the surface of the trailer with the built-in flange. Now the hardware to install this is not included. It does include the gasket on the back. This does accept the industry standard three prong plug. We do sell that separately on our website.This light is DOT, Department of Transportation compliant.
It does meet the federal motor vehicle safety standard 108 and the Canadian motor vehicle safety standard requirements for automotive lighting.A few specs on this. The power draw at 12.8 volts for the tail light is .135 amps. For the stop and turn light circuit is .340 amps.Dimensions on this again. Diameter of this is seven inches. Total depth of it is right about one and five eighths inches and what I've done is connected some clips to the plugs.
We can turn the power on and show you what it lights up like.We'll go ahead and turn our 12 volt power on. You can see there's your glow light, the middle section. I'll go ahead and turn off the overhead lights and probably on the video that you're looking at, this ring actually probably looks yellow, but actually in real life it is a red ring, so it's a solid, that would be your tail light function. Then when you hit your brakes, there would be your brake lights. Then when you do your turn signal, that would be your turn signal also.Go ahead and turn back on our overhead lights and we'll turn off our 12 volt power, but that should do it for the review on the round seven inch glow light three function LED transit light..
Average Customer Rating: 4.8 out of 5 stars (1369 Customer Reviews)
7" Diameter. Waterproof, LED transit tail light with 32 diodes provides stop, turn, and tail functions. Built-in reflex reflector. GloLight lens creates a solid panel of light. Surface mount with included gasket. Accepts male AMP-style plug.The order experience was great . You kept me informed where my order was and that it was in time.
Great experience.
Really happy with this purchase. Makes the trailer highly visable in bad weather and at night.
I gave 4 stars because I really thought they’d be brighter for backup lighting. They definitely do help in letting others know you’r intentions from behind.
We installed these clearance lights on a 16-foot tandem axle trailer a year ago that is primarily used for hauling firewood. We use it in the forest and most of the road miles are gravel. Since the lights are not housed in a recessed light fixture, we made one of steel pipe with the leading edge extended ¼ inch to deflect flying road rocks and running through brush in the forest. All the wiring under the trailer is in conduit and all the wiring is Ancor brand marine grade. Had we installed the lights as demonstrated in a picture on the etrailer.com web site, the lights would have been damaged quickly in our service conditions. The Led lights are working fine although they run a bit hotter than preferred which may lead to a shortened life. Tip: Never use copper clad aluminum automotive wire from China on trailers as aluminum is the sacrificial metal for cathodic corrosion and the wire conductors will soon disappear into powder.
Love how bright they are. If you are planning a surface mount, as I did, you probably won't want a pigtail. Space was at a premium and my access holes are small. I just cut the connector leaving 3 inches and tied into the existing bundles.
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.
I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
a little loose in the side marker bracket, but easily solved with a wiretie.
These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed.
These are some pretty sweet lights. Very bright and attention getting. I am constantly getting compliments on them.
The High Points-
- I bought the standard 3 prong style, works just fine with a Truck-Lite plug and with a no name one I had lying around.
- When not using driving lights both the outer and inner lights flash for turn signal. Don't remember reading about that, but it's pretty sweet(at least for the people behind me!).
- All 4 arrived in excellent shape and with all lights working.
Now, for the only negative that I can come up with-
- 2 of the lights have what I think is a sliver of white plastic stuck between the outer circle and the cover. I'm guessing it's from pressing the halves together. They can't be seen until you're very close to them, but for a $28 light it's a bit disappointing for that to get past QA.
Regardless, I highly recommend these, they are very distinctive and so far I haven't seen anyone else with them. Can't wait to be able to afford 4 more!
Added Glolight LED's to my trailer. Much brighter than the factory originals. Makes launching pre sunrise much easier. You can see where you are backing up.
These are great light. They look so good i put them in my restomod. I didnt like the factory light i replaced all lights with LEDs. These were a perfect fit!
Great Product, it's good quality and will fit perfectly for the trailer I use in my Air Conditioning, Heating & Refrigeration Business. The only problem is I ordered the wrong side. Wasn't sure if by the which one was the left or the right? I was looking at the trailer form the front when I determined it was the left one but it appears your suppose to look at the back of the trailer when you do that. Guess I will be ordering the otherside here shortly. Maybe I can get an exchange or if not then I will have a spare and hope if it does get broken again it's the other side. Etrailer has some really good quality stuff at a very good price. I got my hidden hitch from them at a Great Price. They even had a video that showed me how to install it. A couple of the local places here wanted 3 times the amount of what I paid to provide the hitch and install it for me. Will never go anywhere else for any trailer parts or accessories.
The Optronics surface mount light (STL178RK1B) was easy to install and the 22 LED diodes provide exceptional light.
The light fits snug on the trailer bracket and the foam gasket provides extra protection.
Great Light! Put two on the back of a toyhauler for backing up.
You will need the grommet and pigtail to do it right.
I had to cut two oval holes for mounting in trailer frame. Take your time with the layout and get the right sized hole saw, makes installation pretty easy.
I have a Triton trailer which had a blown out incandescent tail light.
I decided to upgrade all the lights to LED.
It took me only 30 minutes to change out all 13 lights. I used a little silicone spray and a small screwdriver and the old lights came right out of the rubber grommets and the new lights fit perfect.
They are really bright and makes a big difference, glad I did the upgrade!
exactly the replacement I needed for my boat trailer
Very good glow light trailer lights. I mounted them on a small 1972 Coleman VersaTrailer. Very pleased with quality and the glow light appearance. Very strong light as well.
I really like these lights. I use them for my rear lighting and rear side marker/turn signals. I went out of the way to use these on my trailer which involved reinforcing the frame since I had to cut a large piece out to install them. Well worth it. They are bright and have a distinctive look.
These LED stop, turn, tail lights are an exceptional upgrade. They halo is a great feature and blinker lights are very bright! I truly believe these lights have made my unit safer!!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.