bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Oval
  5. LED Light
  6. Red
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens

Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens

Item # STL22RB
lowest price pledge
Our Price: $23.59
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.31 lbs
Quantity: 
In Stock
STL22RB - 6-1/2L x 2W Inch Optronics Tail Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug Lowest Prices for the best trailer lights from Optronics. Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens part number STL22RB can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (1394)
  • Q & A (0)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - STL22RB

  • Tail Lights
  • Oval
  • LED Light
  • Red
  • 6-1/2L x 2W Inch
  • Recessed Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug


Features:

  • Oval trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Miro-Flex faceted reflector design provides increased light output with a contemporary appearance
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over white LEDs
  • Flush mounts with grommet (A70GB - sold separately)
    • Mounts in any 360-degree position
  • Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
  • DOT compliant


Specs:

  • Overall dimensions: 6-1/2" long x 2-5/16" tall x 2-1/4" thick
  • Diodes: 12
  • Power draw at 12.8V:
    • Stop/Turn: 0.161 amps
    • Tail: 0.009 amps
  • Lifetimes warranty on LEDs


Optronics STL22 Series Miro-Flex Oval Sealed Tail Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a grommet (A70GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL22RB Optronics Miro Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 LEDs - Oval - Red Lens

Alternative part number: STL-22RB




California residents: click here



Customer Reviews

Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens - STL22RB

Average Customer Rating:  4.8 out of 5 stars   (1394 Customer Reviews)

6-1/2" x 2-5/16" Oval. Waterproof trailer light serves 3 functions: stop, turn, and tail. Miro-Flex faceted reflector increases light output. Flush mount with grommet (sold separately). Accepts industry-standard 3-prong plug

by:

Fit like a glove. Just what I needed. It replaced a tailight on a 2001 trailer.




by:

Excellent replacement products for the bullet bass boat trailer. Upgraded all trailer lights to LED.




by:

Definitely a major upgrade from the single bulbs that finally went out on my old trailer. Simple as can be when it comes to install them. I did have to run additional ground wires to get to get lights to work when the parking lights are on. Could have been due to the fact my trailer is a tilt trailer? No big deal just a heads up if anyone else is having the same problem. Pictures shows them with parking lights on and brake lights. They're bright that's for sure!




by:

Ordered led lights to replace all the lighting on my triaxle trailer. Parts arrived sooner than expected and were a terrific upgrade. I had an issue with one taillight. The item was replaced at no charge, no hassle, no questions asked. Fantastic customer service.




by:

Sirs: I have a ten-foot enclosed motorcycle trailer that I purchased new in 2010. Recently, I noticed the existing taillights were working -- but were far from being safe. I assumed that I had a wiring problem and that I might have to take the trailer somewhere and have the wiring harness checked and/or replaced. Fortunately, I looked at several of the videos on your web site and decided that I would replace the existing taillights before committing to a re-wire job. I ordered a pair of STL22RB 12 diode trailer lights and a pair of a70gb gaskets. These items arrived in the mail yesterday, and I installed them this morning. Problem solved! The new LED lights work quite well, and the installation took less than five minutes. I have some light bulbs in the house that take longer to replace than did these taillights. Thanks, guys, the videos that I looked at on the etrailer.com web site convinced me that I could do the job simply, quickly, and safely. Piece of cake!!! Now, I may change out all the old marker lights with new LED lights. Thanks, again. Lou C.


Comments
These LED lights are still working as well as the day day they were installed. Great product. Great video info provided by etrailer.com.
Lou C - 05/12/2017



by:

Love these LED trailer lights and now Love Etrailer!! Did a quick Google, found these guys, they had what I was looking for and at a great price. Their shipping was FAST, and I really liked the e-mails letting me know every little thing about my order and when it will arrive. Installed them the same day I got them. Installation was very easy and the lights were VERY bright. We had to bring the 3k pound trailer home today in 6" of snow. I felt great knowing the people behind me knew I was hitting the break, because you can see these break lights from a mile away!! Thanks Etrailer!!




by:

Nice and bright. Drivers will be able to see these lights when my taillights are obscured by bicycles.




by:

Good design and materials. Bright light, and easy fit into accessory mounting parts. As a single middle third light, it functions as a brake, running and directional lights. Perfect for a hitch mounted bicycle rack.




by:

The lights are good and standard size, but they seem to have a slightly off plug receptical. I ordered 6 of them and all seemed to be the same. I had to bend my connectors with a pliers a little bit to get them plugged in.




by:

I needed a replacement left tail / stop light combination for my trailer. After loosing the operation of one of the two lights which left me vulnerable to a possible accident or ticket violation during the last long trip I was on, I chose the STL22RB LED above for lasting durability (usually found in LED's) and quicker response time in operation over incandescence lamp fixtures that were originally installed on my 2015 Big Tex Trailer. I have been adding extra LED marker light fixtures to my black Big Tex over the last year to make it more visible during night time operation and easier to operate in motion at night. The both fixtures were easily changed and work flawlessly.




by:

The lights were great. Instigation was very easy. The service and delivery time was excellent. I will adding more LED lights to my trailer and I will be buying them here! Thank you to your entire staff!




by:

Bright lights. Great upgrade from the incandescent. Very easy to remove old ones and install these on my triton snowmobile trailer.




by:

Will be two more weeks before ready to install them. They look like made good. Only reason not 5 star is not hooked up yet to test.




by:

Awesome tail lights


Comments
Awesome tail lights !!!!
Samuel - 05/21/2017



by:

One was fine, the other is a different light. I ordered 2 of this model and got one and a 72RB plus it looks used, the lens is all scratched


Comments
Wow, I am sorry that you received the wrong product. Customer Service will take care of this for you.
-- Etrailer Expert Sierra K - 08/24/2021


by:

these lights are bright, reliable and after being submersed a 100 times still like the day they were put on. Highly recommend these and anything you may need from the good folks at etrailer.




by:

These lights were an exact replacement for the original incandescent lights in my car trailer. They are very bright, and traffic behind me actually pays attention when I turn my signal on now. They are a much needed improvement over stock. Juanita was also very helpful in verifying that I had the right connector for them. Very prompt shipping too, as I had them in 3 days after I ordered them.


Comments
The lights work as good as new. They are a great replacement over stock tail lights.
Don G - 10/21/2015



by:

they are nice and bright sorry no picture of them in action video would not load to site


Comments
Ahhhh! Is all I hear from those behind me cause they are so bright and thats what you need on the back of your motorcycle. Very pleased!!!
Randall - 07/30/2017



by:

good deal - had to replace a light that had burned out in 6 months and figured i'd do the smart /safe thing and put in brighter long lasting led's . so glad i did , worth the extra money , nice and bright. slid right into the existing rubbers.


Comments
still working great a year later. really make the back of my car trailer much more visible - great deal thanks.
anthony d - 08/10/2018



by:

What do y'all want a follow up to? If i had a nickel for every item I've ordered off of ETrailer, I wouldn't have to work for a few months... I keep coming back because the prices are fair, shipping is free and fast, and ETrailer has everything I need.

I do wish you sold trailer kits though. Being a welder, I have built a few trailers in my free time and sold them for a small side business. Why isn't there an axle, fender, brakes, springs (shackles and all hardware) tires and wheels kit? It would be nice to not have to go and click and add to cart all the multitude of items I need to build a trailer individually. Just saying...




by:

Plug and play and they work perfectly. Very bright. These were direct replacements for the tail/brake/turn signal lights on the back of my Ranger Trail trailer for my 2016 RT188. They work beautifully but SAVE YOUR GROMMETS because the grommets that you can buy with these lights are absolutely useless and won't hold the lights in the trailer.




by:

Miro-Flex Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 12 Diodes - Red Lens - STL22RB EXCELLENT LED if you are in the market for an oval shaped RED or AMBER LED light, this new technology by Optronics, Miro-Flex is amazing. Love these over the 1st generation of LED. Reflects light even without being on, is very bright, solid construction and looks cool. Using 4 on the back of the trailer, just getting the 1st one hooked up was bright!!! Purchased the 3 pigtail to plug into it, the female plug frame is solidly constructed. This is a great purchase. Also look at the other Optronics Miro-Flex lights. ETRAILER.COM delivered quickly in a solid packaging. Great job guys!




by:

Awesome looking upgrade for older trail er...




by:

Used these to replace stock lights on a 2010 Continental Cargo (Forest River) box trailer for our Boy Scout Troop. New lights snapped in perfectly and are much brighter, factory wiring harness had no issues. Would buy again if I need to, but with LED hopefully this is a non-issue.




by:

I upgraded the lights on my kayak trailer from incandescent to LED after getting tired of replacing burned out bulbs on the old lights. The new STL22RB LED tail-stop-turn lights are great. I also installed the red and amber side marker lights MCL11RKB and MC11AKB and the are great too! The new tail lights are very bright when viewed from directly behind the vehicle (see picture), but they are less bright when viewed from an angle...I think that is normal with all LED lights. Everything was easy to install on my trailer with the BK70BB brackets and wiring harnesses. I will definitely recommend the lights and etrailer to my friends!



25
1425
Show More Reviews

See what our Experts say about this Optronics Trailer Lights



  • What to Consider When Picking Out LED Trailer Lights
    I have a couple links for you to check out. First check out the link I attached that details all of the different lighting requirements for trailers based on overall size. Most likely you will just need to replace every light you currently have with an LED version, but it can't hurt for you to check out just in case. The second link I attached will take you to a page that has all of the LED trailer lights we offer. You will need to compare what you have on your trailer to what is listed...
    view full answer...
  • What is the White Wire of a Trailer Taillight Wiring Harness For
    The white wires of your trailer lights are the ground wires. It sounds like your previous trailer lights grounded through the mounting hardware so because of that you would need to run the white wire of the new assemblies to either a clean metal surface that touches the trailer frame or back to the main ground for the trailer's wiring. The green would be right stop/turn and the yellow would be left stop turn. The brown is taillights.
    view full answer...
  • How to Wire a Stop/Turn/Tail Trailer Light With Two Wires to a Trailer
    It sounds like you have a trailer taillight that grounds through the mounting hardware. Typically the red wire would run to the turn signal/stop light circuit and the black would run to the taillight circuit, and then the ground circuit would be complete through the mounting hardware.
    view full answer...
  • Troubleshooting Trailer Wiring that Stopped Working After LED Trailer Light Install
    Sounds like you have a short between the stop/turn circuits and the 12 volt accessory circuit which is putting voltage on the power wires for the lights at all times. Best option is to go over the wiring of the trailer looking for any obvious shorts like exposed wire etc. and fix as needed.
    view full answer...
  • Troubleshooting Installation of LED Trailer Lights with Red, Black, and Yellow Wires
    If your LED has red, black, and yellow wires, then I recommend running jump wires from a battery to test functions before installation. It is likely the red wire will be the stop, the black wire is running light, and the yellow is possibly the turn signal. It sounds like this is a 3 wire light that may ground through mounting hardware. Without seeing the light, that is my initial thought since the wire colors are not standard. When you test functions on each wire, then you will know...
    view full answer...
  • Is White Wire of Trailer Wiring Most Commonly the Ground Circuit
    For trailer wiring the white wire is almost always the ground wire circuit. Since trailer wiring gets redone periodically it's not uncommon for the colors of the wiring to get changed but in general white being ground is the most consistent. Then the brown would be most likely the running light circuit. I attached a link to a page that has trailer wiring diagrams for you to check out as well.
    view full answer...
  • Recommended Replacement Tail Lights for 2013 Itasca Cambria Motorhome
    We don't have a database that tells us exactly what lights are on specific coaches, but I was able to find some photos and videos online that show a 2013 Itasca Cambria and it looks like they've got a fairly unique oval shaped tail light. With that said, it looks like they're LED lights, so you may be able to use something like the Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens # STL22RB. These are recessed mounted lights that are 6-1/2"...
    view full answer...
  • Locating Replacement Tail Lights for Boat Trailer
    We have a large selection of trailer lights that may work great on your boat trailer. The closest option we have available to the dimensions you provided is with an oval tail light like the Optronics Micro-Flex Trailer Tail Light # STL22RB. This LED light measures 6-1/2 inches long, 2-5/16 inches tall, and features an overall depth of 1-3/4 inches. It has a sealed, waterproof housing and lens unit that will work nicely for your boat trailer. I have attached a short video demonstration...
    view full answer...
  • Replacing 2-Wire Trailer Light with 3-Wire Trailer Light
    The white wire on your new trailer light assembly is indeed for ground. Your old tail light grounded through its mounting hardware so it didn't use a separate wire for this purpose. You just need to attach the white wire on the new light to a clean, bare metal surface on the trailer frame.
    view full answer...
  • New LED Lights Do Not Work on Trailer with Same Connector
    The photo did not come through but are you sure that the pins inside the old connector matches the socket inside the new light? They could look very well the same and even plug into one another but that doesn't mean they are wired the same. I would find the pin inside the light that is supposed to receive power and then check to see if it is in fact receiving power using a circuit tester. There could also be a ground mixup. For example, the new light may ground though the hardware and the...
    view full answer...
  • Determining Function of Trailer Light Assembly with White, Brown, and Green/Yellow Wires
    Based on standard trailer wiring colors the white wire will be the ground, the brown would be running light, and the green/yellow will be the stop/turn circuit.
    view full answer...
  • LED Trailer Light Replacement Recommendation for 2005 Featherlite Model 8546 Gooseneck Trailer
    Based on the picture you submitted it looks like you are looking for the part # STL22RB which is an LED version of the light you have that has 12 light emitting diodes.
    view full answer...
    Image 1 for
  • Troubleshooting Dim LED Trailer Lights after New Wiring and Light Assembly Installation
    The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part # 3808. Next, trace the wiring back to the light assembly testing as you go with the circuit tester to make sure the voltage is making it to the light assemblies. Next, you need to make sure the ground wire of the light assemblies are connected to a clean, metal surface. If you...
    view full answer...
  • Troubleshooting Trailer Lights Not Functioning When Headlights are On
    It sounds like there is too much amperage being drawn on your trailer when the headlights are on and it is too much for the trailer so everything shuts off. This could be because of a bad ground somewhere. First thing I would do is check the grounds on the trailer for any loose wiring and corrosion and fix as necessary. If the grounds are good you might need to convert your trailer lights to LED lights so as to minimize the draw on the trailer light circuits. LED lights draw a fraction...
    view full answer...
  • Optronics Trailer Lights # STL70RB and # LED Light Brightness
    I spoke with my contact at Optronics and was informed that the Lumen difference between part # STL70RB and part # STL22RB LED stop, turn and tail lights is not tested by Optronics. I was told that the more LED lights in the tail light the brighter the light will be. I have seen these lights on display and these lights are very bright especially as compared to incandescent lights.
    view full answer...
  • Optronics Trailer Lights # STL72RB LED Light Brightness
    I spoke with my contact at Optronics and was informed that the Lumen Difference between the # STL22RB and the # STL72RB LED tail lights is not tested by Optronics. I was told though that the more LED lights that are in the tail light the brighter the light will be whether the description says super diode or not. I have personally installed the Sealed, 6-1/2 inch Oval LED Trailer Stop, Turn and Tail Light, 10 Super Diode, item # STL72RB, on a CornPro 24 foot car hauler and these lights...
    view full answer...
  • Troubleshooting Trailer Lights on 1997 Maxum Trailer that Arent Working
    To make sure the problem is isolated to the trailer, I recommend using a simple light tester, like part # 40376, to test the trailer connector on your tow vehicle to make sure it is functioning properly. I have attached a video that shows how to do this. If the connector on your vehicle is not functioning as it should, then the problem could be related to a poor connection or faulty wiring on your vehicle. If this is the case, you can send me the year, make, and model of your vehicle and...
    view full answer...
  • When Installing Optronics # STL22RB,The Right Rear Running Lights Work But Stop and Signal Do Not
    To determine why your stop and signal lights do not work we have a process that can give some direction. First, we have to determine if the issue lies in your truck or your trailer. To test the truck, use a circuit tester such as Draw-Tite # 40376, and test the pin in question. I have attached a short video showing the testing process. If you find the pin without voltage when the corresponding function is activated, there lies your issue. If all of the pins check out with voltage on...
    view full answer...
  • Running Lights and Marker Lights do not Work on a Boat Trailer with LED and Incandescent Lights
    There are a few different things that could be causing your problem. The fact that some lights are LED and some lights are incandescent should have no effect on their functionality. The first step I would take is to use a circuit tester, like part # 40376, and test the trailer connector on your tow vehicle. With the running lights on, test each pin in your trailer connector for power. If you do not have power for the tail lights at the vehicle side trailer connector, then you most likely...
    view full answer...
  • How To Wire LED Stop/Turn/Running Light
    You should have 3 wires at the rear of your LED light, or from a pigtail like part # A47PB, that plugs into a light like part # STL22RB. The red wire will be connected to your stop/turn circuit on your vehicle. The black wire is spliced into your running lights, or the lights that are turned on your vehicle when the headlight switch is on. The white wire is your ground and needs to be attached to a clean, bare metal surface. It may help using a circuit tester like part # 40376, to...
    view full answer...
  • Troubleshooting New Trailer Lights That Flash Both Side Taillights when Turn Signal is Activated
    First, I recommend testing the trailer connector at the rear of the truck to ensure that the wiring on the truck is functioning properly. You can use a circuit tester like # 40376 to test the pins at the connector, while a buddy in the cab of the truck runs through the functions of the connector. If the wiring on the truck is not working properly, you will want to take the truck back to the shop to installed it. If the truck wiring checks out properly, then we know the issue is on the...
    view full answer...
  • Light Bulb Replacement in a Sealed Light?
    It would not be possible to replace only the bulb in a light such as # ST70RB because it is sealed. You would need to replace the entire thing. There is also an LED version of this light, # STL22RB, which you may be interested in.
    view full answer...
  • Method of Bulb Replacement on Oval Red Grommet-Mount Trailer Taillight
    Usually a grommet-mount incandescent tail light will be pressure-fitted into the grommet and held there simply by friction from the rubber. If there are no visible screws to allow lens removal and no accessible portion of the light's rear surface then its almost a sure thing that you'll just need to carefully pop the light out of its grommet. Ideally you'll have a tool that is strong enough to flex the grommet material but not so hard that it can damage the lens or base. The light in your...
    view full answer...
    Image 1 for
  • LED Tail Lights for a Ranger Trail XT188 Boat Trailer
    I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light # STL22RB is a great option for an LED upgrade. These lights use pigtail # A47PB and will fit the mounts currently on the trailer. If your trailer has different tail lights, such as those that hang from studs then # STL16RB and # STL17RB are great options for that mounting style. If neither of the recommendations above are the light style or...
    view full answer...


< Previous
123. . .4






  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Tyler C
Written by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.