bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Round
  5. LED Light
  6. Red
Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens
Optronics

Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens

Part Number: STL23CCRB
$19.29
Retail:$29.99
You Save: 36%
Trailer Lights
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted red reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug. Great Prices for the best trailer lights from Optronics. Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens part number STL23CCRB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1757)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL23CCRB

  • Tail Lights
  • Round
  • LED Light
  • Red
  • 4-5/16 Inch Diameter
  • Recessed Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted red reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug.


Features:

  • Round trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal
  • Miro-flex faceted red reflector design provides increased light output with a contemporary appearance
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Clear lens over red LEDs
  • Durable polycarbonate housing and lens
  • Compatible with 12V DC systems
  • Flush mount with grommet (A45GB - sold separately)
    • Mounts in any 360 degree position
  • Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately)
  • DOT compliant


Specs:

  • Dimensions: 4-5/16" diameter x 2-3/8" deep
    • Light face diameter: 4"
  • Diodes: 12
  • Power draw at 12.8V:
    • Stop/turn: 0.181 amps
    • Tail: 0.023 amps
  • Lifetime warranty on LEDs


Optronics STL23 Series Miro-Flex Tail Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a grommet (A45GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



STL23CCRB Optronics Miro Flex 12V LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens

Alternate part number: STL-23CCRB




California residents: click here



Customer Reviews

Miro-Flex LED Trailer Tail Light - Stop/Turn/Tail - Submersible - 12 Diodes - Round - Clear Lens - STL23CCRB

Average Customer Rating:  4.8 out of 5 stars   (1757 Customer Reviews)

4-5/16" Diameter x 2-3/8" deep. Waterproof trailer light serves as a stop, turn, and tail light. Miro-Flex faceted red reflector increases light output. Flush mount with required grommet (sold separately). Accepts standard 3-prong plug.

by:



by:

These side markers (both red and amber LED) are great for my 12' trailer. They have 3 LEDs (you can also get 4), and their size is perfect for a small trailer. The LED's are really bright, not only at night, but also during the day, so they are easily seen. I especially like the fact that they are sealed, so there should be no water intrusion problems in the future. I have included a few pictures, the first showing the round LED brake/turn/running/reverse lights (that I had purchased earlier from etrailer) with the red side marker mounted vertically on the outside. The second shows a side view of the red side marker light, and the 3rd picture shows the side marker mounted to a small piece of 1" X 1" x 1/8" aluminum angle which I painted black to match the mounting frame of the round LED lights. I mounted the LED side marker to one leg of the aluminum angle, then mounted the other leg with 1" standoffs to two holes already present on the black mounting frame of the round LED light. Although all the lights are sealed against water intrusion, I decided to mount them on each side of the trailer at the top of 2 PVC pipes, about 36" long each, where the lights would not be exposed to immersing in water when launching/retrieving a boat.



by:

I installed these lights in a T@B teardrop camping trailer. The grommet would not work on this style trailer so I installed the lights using a silicone adhesive the same as the original Peterson lights. eTrailer delivered them in the same timely manner I have come to expect from them and the LEDs were easy to install. These lights are blindingly bright - simply amazing. I had rear lights with 1157 bulbs which I had upgraded to 2357 bulbs and equipped the tow vehicle with a powered converter but the light output was dim by today's standards. These lights are twice as bright on running lights and about 4 times brighter on the brake/turn signal elements. The thing we all fear when towing is being hit from behind by a driver that does not see our running, brake or turn signal lights in time. I know these lights will vastly improve the safety and visibility of our trailer. Thanks!



by:

love etrailer. They are fantastic!



by:

Looks and works way better than the factory lights on my Thule Transporter Combi.



by:

Great little lights, and very bright as well. They have been installed on a trailer and submerged many times since installed, and still work great!! Can't beat LED's for brightness and, hopefully, longevity!!! Attached is one picture of the overall trailer, and a closeup of the amber side light. I also have 2 red sidelights that are mounted above water at the rear of the trailer, and they are still working great as well.



by:

The lights look ok, but I haven't gotten them installed yet. My main complaint is the packaging, because everything I ordered was thrown loose into one box. You need to do better to ensure nothing is damaged during shipping.



by:

The lights look ok, but I haven't gotten them installed yet. My main complaint is the packaging, because everything I ordered was thrown loose into one box. You need to do better to ensure nothing is damaged during shipping.



by:

This fixture was the exact replacement for my 2011 Trailmanor 2720 trailer. The manufacturer had moved to a more modern looking fixture. I was even able to use the old chrome piece from the old fixture to keep a uniform age look. I installed a wireless rearview camera and needed a new fixture and its longer wires to make everything work. May look a little strange, but it works like a charm. E-Trailer service was excellent as usual.



by:

These are a perfect upgrade on my jet ski trailer which was constantly burning bulbs maybe because the lights were not watertight. No amount of dielectric grease prevented it. These were easy to install. They are watertight and are twice as bright as the old ones. Great customer service! I highly recommend the lights and etrailer.com!



by:

etailer has everything, even these tail lights for my Thule hitch Terrapin Cargo Box to replace the original sealed incandescent Tail Light Units.



by:

Failed after 2 years.



by:

shipping delayed but communication with etrailer outstanding giving the truth.



by:

The lights fit great and work great.



by:

I received the lights and tested
them;
they worked fine. They are destined to be used on a car, not a
trailer. Side marker lights for cars/trucks are rare now because they are
incorporated into the front and rear light assemblies and rap around the
vehicle. The lights I ordered from you are the only ones I could find that
had a hole-mount pattern wide enough to clear the metal cutouts, under the
old lights, in the fenders of my car. I'm glad you have a huge selection to
choose from. I'm not sure when I'll get around to installing them. The car
is undergoing a restoration for the third time. All I know is the next time
I remove the stock side markers, they will shatter. Few trim parts are
available for this car these days and nylon snap-in mounting tabs dry rot
and break after a couple of decades. I bought this little car new 26 years
ago and took it around the world with me before I retired from the Air
Force.

I attached a picture of it from the last touchups 7 years ago. It won't quit
running so I keep giving it new birthdays. This little rat car has become a
part of my DNA.

1991 GEO Tracker 4x4. Original owner.



by:

I received the lights and tested
them;
they worked fine. They are destined to be used on a car, not a
trailer. Side marker lights for cars/trucks are rare now because they are
incorporated into the front and rear light assemblies and rap around the
vehicle. The lights I ordered from you are the only ones I could find that
had a hole-mount pattern wide enough to clear the metal cutouts, under the
old lights, in the fenders of my car. I'm glad you have a huge selection to
choose from. I'm not sure when I'll get around to installing them. The car
is undergoing a restoration for the third time. All I know is the next time
I remove the stock side markers, they will shatter. Few trim parts are
available for this car these days and nylon snap-in mounting tabs dry rot
and break after a couple of decades. I bought this little car new 26 years
ago and took it around the world with me before I retired from the Air
Force.

I attached a picture of it from the last touchups 7 years ago. It won't quit
running so I keep giving it new birthdays. This little rat car has become a
part of my DNA.

1991 GEO Tracker 4x4. Original owner.



by:

great service !! I ordered my lights and they shipped the same day .Received them today. I could not be more happy. Thanks,



by:

These lights are of very good quality and are really bright. I use them on an early 70's Bronco for the front turn signals. Day or night, they are distinct and unique and best of all, . Definitely visibly on during the night AND the day (this can be seen in the photo taken on a Snow day, bright, while half way out of my garage). Great price for a great product



by:

Bought these to replace all of the single wire, ground to the trailer type lights that were on my boat trailer. I bought the amber, red and white lights for the various positions I needed them in. They are bright and work very well. For mounting hardware, an 8-32 machine screw fits just right. Something to be aware of, they say it’s a flush mount, but it’s not with the wires sticking out the back of the light. Instead of drilling a relief in my trailer, I opted to use some aluminum cable stops as standoffs. See pictures to further explain. Worked great in the end. These are quite bright for marker lights and and perfect for what I wanted. ETrailer has prompt shipping as usual.



by:

I've been wanting to upgrade the trailer tails from incandescent to LED for a long time, as I felt the incandescent tails were just not visible during the daylight.

These Miro-Flex model TLL28RK are just STUPID bright, their daylight visibility is incredible, and that's just what I wanted. They were easy to mount, easy to wire, and I also like the lower power consumption.

The only thing I had to change was to drill a new hole in my light brackets for the wires, because with my old lights, the wires came out on the top, and on these, the wires exit from the bottom of the light.



by:

Bought these to replace all of the single wire, ground to the trailer type lights that were on my boat trailer. They are bright and work very well. For mounting hardware, an 8-32 machine screw fits just right. Something to be aware of, they say it’s a flush mount, but it’s not with the wires sticking out the back of the light. Instead of drilling a relief in my trailer, I opted to use some aluminum cable stops as standoffs. See pictures to further explain. Worked great in the end. These are quite bright for marker lights and and perfect for what I wanted. ETrailer has prompt shipping as usual.



by:

I love LED lights and these are working great on my boat trailer. They're so much brighter than the incandescents.



by:

I got these because the original ones were a single bulb theses are much brighter. I also got a 7pole to 4 pole adapter my old one got squashed I went to 5 different places and no one had it checked on etrailer and there it was I ordered it and it was in my hands in less than a week as you see I taped it together so I never have to search for it. one other thing I got was a chrome led license plate light I had replaced mine with a original plate light from the trailer company twice and they keep breaking I think it was because they were black and you couldn't see it with this one being chrome it sticks out and being led it is much brighter and it cost less than the original one



by:

Definitely a major upgrade from the single bulbs that finally went out on my old trailer. Simple as can be when it comes to install them. I did have to run additional ground wires to get to get lights to work when the parking lights are on. Could have been due to the fact my trailer is a tilt trailer? No big deal just a heads up if anyone else is having the same problem. Pictures shows them with parking lights on and brake lights. They're bright that's for sure!



by:

These bright and waterproof little lights are wonderful. They draw only .5 watts (ie so little they will probably not make a difference to any auto, RV etc lighting circuit). I used them to enhance the dim stop and turn signal on my RV. The plastic lens were fogged and the voltage kind of low (a 40' RV has a lot of voltage drops) but these little LEDs shine bright and were a LOT cheaper than trying to replace the existing fixtures. I just wired them in parallel with the existing light bulb. So now I have a bright stop light and a built-in spare (the existing bulb could burn out and the LED will keep working). The photo shows how I did it


25
1691
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

Do you have a question about this Trailer Light?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.