Miro-Flex LED Trailer Tail Light - 7 Function - Submersible - 20 Diodes - Square - Red - Driver

See what our Experts say about this Optronics Trailer Lights

• Replacement LED Tail Lights for 1990 Featherlite Horse Trailer
  You will be able to replace the incandescent lights on your trailer with LED without a problem. Like you said, you can just take the old lights out and replace them with new lights. If the Miro-Flex LED Combination Trailer Tail Lights - Submersible # STL28RB & # STL29RB you looked at would be a great choice assuming they are the style and size you want. These are surface mount lights so they will be able to mount in most places without a problem. The dimensions of these lights are 5-1/4"...
  view full answer...
• Availability of a Submersible Trailer LED Light Kit
  For a waterproof LED light kit you would want to use # TLL9RK. I can verify that his kit is listed as waterproof which would include it being submersible. The # STL28RB & # STL29RB is comprised of lights not listed as submersible as you have said.
  view full answer...
• Will Replacement LED Tail Lights on Boat Trailer be Compatible with Current Incandescent Lights
  There is no harm in using LED Tail Lights, like part # STL28RB & # STL29RB, along with incandescent lights on your boat trailer. They will work just fine together. I am linking our selection of LED tail lights for you to look through but if you can let me know the dimensions of the lights your are wanting to replace I can see if we have a similar LED option available.
  view full answer...
• Recommended Replacement Tail Light Assemblies for a Yamaha Trailer
  If your Yamaha trailer measures over 80 inches, then I recommend the Optronics Waterproof LED Trailer Light Kit, # TLL160RK. This light set is designed for marine trailer applications which means the unit is sealed and waterproof. The units are hard wired to your current trailer's lighting wiring and the units have separate ground wires. For a trailer that is smaller than 80 inches, I recommend the Optronics Micro-Flex LED Trailer Tail Lights, # STL28RB & # STL29RB. These light are square...
  view full answer...
• Recommended Plastic Fender for 14 Inch Wheel and Tail Lights
  We have white plastic fenders that will fit your 14 inch wheel. I recommend the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps # PF11X35W. If you want matching fenders, then you want # PF11X35W-2. If you need the mounting brackets, I recommend the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender # PF1135-BKT-2. These don't have the integrated lights, but trailer lights are an easy addition. I recommend the Miro-Flex LED Trailer Tail Lights -...
  view full answer...
  
• Replacement Square Trailer Tail Light Without License Plate Light
  We do! The Optronics Combination Trailer Tail Light # STL29RB you were looking at is the driver's side with that license plate light so the equivalent of that is part # STL28RB which is designed for the passenger's side so it doesn't have the license plate light. Attached is a review video for both lights for you to check out.
  view full answer...
• Mounting Dimensions of Miro-Flex LED Trailer Tail Lights
  The mounting dimensions of the Miro-Flex LED Trailer Tail Light # STL29RB and Miro-Flex LED Trailer Tail Light # STL28RB are exactly the same - they have mounting studs which are 2" apart on center. These are exactly the same lights with the only difference being that Tail Light # STL29RB has a license plate light function because it is the driver's side tail light. Apart from that both lights have mounting studs in the same location, both measure 5-1/4" wide x 5" tall x 2-5/8" deep...
  view full answer...
  
• Replacement Options for Miro-Flex LED Trailer Tail Light Kit # TLL28RK
  I was able to look back at your order and find that you purchased the tail light kit TLL28RK. You will need to replace one of the lights because the manufacture does not offer just the lens. The good news is you will not need to replace the entire kit though. For the left hand side you will need # STL29RB and for the right hand side # STL28RB. I have linked the above mentioned products to this page for your convenience.
  view full answer...
• Recommended Replacement Tail Lights for a 2018 Bass Tracker Boat Trailer
  I have some great compatible replacement tail light options for a 2018 Bass Tracker Boat Trailer. For this, you can use the Optronics LED Combination Trailer Tail Lights part # TLL160RK if you have the rectangular style or the Miro-Flex LED Combination Trailer Tail Lights part # STL28RB & # STL29RB is you have the square style. If either of these don't match up with what you have please just send a photo and I'd be glad to see if we have a better option.
  view full answer...
• Is a Special Converter or Adapter Needed to Tow a Trailer with LED Lights
  Most aftermarket trailer wiring harnesses are compatible with LED trailer lights but I would need to know the year, make, and model of the vehicle to be sure. Factory tow package wiring usually works fine but German vehicles (Volkswagen, BMW, Audi, Mercedes) can have issues since the LED lights draw far less power than incandescent lights. I have heard of only a few cases of other vehicle manufacturer tow package wiring being an issue with LED lights. But even if the low power draw causes...
  view full answer...
• Replacement Tail Light for 1990 Douglas Boat Trailer
  All of our Wesbar Tail lights that are incandescent bulbs use a 1157. To get your replacement bulb, you will need to remove the other bulb and read the number on it. Since you seem concerned about breaking your lights, it may be a good time to consider upgrading your tail lights. I recommend the following LED options: Waterproof, Over 80" LED Trailer Light Kit # TLL160RK Miro-Flex LED Trailer Tail Lights # STL28RB & # STL29RB Waterproof, Under 80" LED Trailer Light Kit with 25' Wiring...
  view full answer...
• Replacement Tail Lights on Malone Microsport XL Kayak Trailer
  Yes. The tail lights on the Malone Microsport trailers like the # MPG460XT are submersible. You can use the # STL28RB & # STL29RB to replace these lights with another submersible light or go with a completely sealed and waterproof light set with the # TLL9RK. I do recommend going with the # TLL9RK waterproof lights just because of the added protection and durability you get with this application.
  view full answer...
• Square Replacement Taillight Lens With 3-9/16" Hole Spacing
  The Replacement Tail Light Lens for STL2RB and STL3RB part # AL8RB-1G offers hole center to center measurements of 3-3/4". Which would be very close and as close as I am able to come up with to the 3-9/16" you have. Check it again to see what you get as they are only about 3/16" different.
  view full answer...
• Drivers Side Replacement for the Miro-Flex LED Combination Tail Lights
  For a driver's side replacement for the Miro-Flex LED Combination Trailer Tail Lights TLL28RK use the Miro-Flex LED Trailer Tail Light # STL29RB.
  view full answer...
• Solution for Installing Trailer Wiring Where Wire Colors Are Different and Unknown
  So sometimes trailer wiring and taillight wiring end up using wire colors that are different from standard. It's frustrating but the only solution is to first verify what all of the functions of the wires are and then wire accordingly. You can use a vehicle battery to verify the functions of the lights first and then use a circuit tester like part # PTW2993 to verify wiring by having it connected to a vehicle and then test the wires while all of the taillight functions are applied.
  view full answer...
• Recommended Trailer Tail Light Kit with 38 Diodes
  Yes, the Miro-Flex LED Combination Trailer Tail Lights part # STL28RB & # STL29RB have a combined total of 38 diodes. In order to add the wiring you can use the 35 Ft 4-Way Trailer Wiring Harness part # A35W42B.
  view full answer...
• LED Trailer Wiring Set Recommendation for Replacing Lights with 3 Wires
  The Miro-Flex LED Tail Light Set # STL28RB & # STL29RB would be a great choice for you as they are an LED trailer taillight set that uses three wires. The white is ground, the brown is taillight, and the yellow is for left stop/turn and the green right stop/turn.
  view full answer...
• Bright LED Trailer Taillight Recommendation
  The Miro Flex LED Trailer Taillights # STL28RB & # STL29RB have 38 diodes which are incredibly bright. This would be a great solution for what you are looking for. I attached a picture that shows just how bright these are installed on a PWC trailer.
  view full answer...
  
• Fit and Compatibility of Optronics LED Trailer Lights in Redline Light Guard # LLG440NP
  Good news! I was able to go out to the warehouse and test fit these two products together for you. The Optronics # STL28RB & # STL29RB LED trailer lights did indeed fit into the # LG440NP housing. They were slightly tight in the height but they did indeed fit. I measured the interior of the light guard # LG440NP and found that it measures 5-1/8 inches tall by 5-5/8 inches wide. Another great tail light protector that won't require modification for the license plate light like the #...
  view full answer...
• Can I Use LED and Incandescent Lights on My Trailer Together
  Yes, you most certainly can use LED and incandescent lights together on a trailer. I have linked our selection of trailer lights for you to check out. If you need to choose some lights if you just let me know what dimensions you are looking for and I can make some recommendations for you.
  view full answer...
• Recommendations for Trailer Side Light Lens
  Without knowing which replacement lens kit you are looking at, I will give you the general rules. If it is the side of the tail light like # STL28RB & # STL29RB for instance, then the side lens will be red. If you mean the side of the trailer and are referring to the clearance lights, then they should be amber like # MCL95AB. I've attached an article to assist.
  view full answer...
• Wiring Installation for Miro-Flex LED 3 Wire Trailer Lights
  The Miro-Flex LED Combination Trailer Tail Lights # STL28RB & # STL29RB have a separate white ground wire with ring terminal because the mounting hardware is surrounded by plastic not giving the light a solid ground connection. The ring terminal over the mounting hardware works around this to connect the light to the trailer frame. This ground wire doesn't need to be on the mounting hardware and can be attached directly to the trailer frame with a different screw or bolt if desired. The...
  view full answer...
• Replacement Tail Lights for an EZ Loader Boat Trailer
  I do not know exactly what lights your boat trailer came with nor would we have an exact OEM replacement but we do have the Miro-Flex LED Trailer Tail Lights part # STL28RB & # STL29RB which are a submersible LED tail light that should work well for you. The lights mount via two bolts placed 2" apart on center. The circuit boards are sealed, which means that water will not damage the diodes or circuit boards. The lights do not come with sealed wiring connectors but you can add them using...
  view full answer...
  
• Installing LED Trailer Light with Black, Red, and Green Wires
  Typically with an LED light that has a black, red, and green wire the black wire is for ground, the red wire is for the turn/brake light circuit, and the green wire will go to the running lights circuit on the trailer. If you can tell me what model LED lights you purchased I will be happy to verify this for you.
  view full answer...

Do you have a question about this Trailer Light?