10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Normally you need two lights: a tail light and a back up light. But what if you could have just one Introducing the Optronics Combination LED Lamps. These incredible lamps combine the standard stop/turn tail functions with the addition of the back up function, into a single design.Optronics Combination LED Lamps are available in multiple formats to fit any application. The eight inch STL68RB features a slim half inch profile, hardwired design, and can be surface mounted with the popular A68SSB trim ring. The four inch round STL201RB features a recessed grommet mount design, and is available in industry standard PL-3 connection or a weather-tight connection. The four inch round STL201RFMB features a more secure flange mount design with weather-tight connection.
The six inch oval STL211 series gives you the option of the red lens, STL211RB, or the clear lens, STL211RCB. Both lamps feature a grommet mount design, and use the industry standard PL-3 connection.All Optronics Combination LED Lamps are sonically sealed to keep out rain and road grit, utilize cost efficient SMD LED technology to increase corrosion resistance, are encased in a tough, impact resistant polycarbonate housing, and of course are backed by Optronics LED Lifetime Warranty.The new Optronics Combination LED Lamps.
Average Customer Rating: 4.7 out of 5 stars (153 Customer Reviews)
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.Complete garbage. ordered a pair, neither work correctly. 1 tail is bright like brake light, other no tail period. test before installing.
Placed an online order, which was easy to navigate website. Order was delivered when they said it would be. Very satisfied !
Exactly what was needed to replace the OEM non-led lights
Part very difficult to find and etrailer.com had in stock and fit perfectly
Review from a similar Fusion LED in Trailer Lights
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
Review from a similar Fusion LED in Trailer Lights
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Review from a similar Fusion LED in Trailer Lights
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
Review from a similar Fusion LED in Trailer Lights
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
Review from a similar Fusion LED in Trailer Lights
Great light works exactly like the factory orginal
Review from a similar Fusion LED in Trailer Lights
Added as auxiliary lighting to my 10' trailer. Mounted high up on the tailgate ramp for enhanced left/right turn visibility. Very much wanted the back-up light functionality for nighttime trailering.
I especially was impressed with customer support. No "21 questions," no hoops to jump through... they just solved my problem. They have earned my repeat business.
Review from a similar Fusion LED in Trailer Lights
tail lights need to have better packaging, they where scratched and scuffed during shipping, lights where loose in package no wrapping at all.
Review from a similar Fusion LED in Trailer Lights
Item shipped the day I ordered it and arrived in three days. Always prompt shipping, excellent customer service. The website is also has a tremendous amount of information about each product they sell. Great website.
Review from a similar Fusion LED in Trailer Lights
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
Review from a similar Fusion LED in Trailer Lights
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Review from a similar Fusion LED in Trailer Lights
lights were what they said but packaging was all thrown in with metal parts and got extremely scratched to where I won't be able to use them.
Review from a similar Fusion LED in Trailer Lights
It's a great light! Just be aware that the backup light won't work with a 4-flat wiring harness. I didn't know that, and now I have to add an extra line just for the reverse light.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.