bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Square
  5. LED Light
  6. Red
Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side

Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side

Item # STL8RB
lowest price pledge
Retail:$20.56
Our Price: $13.45
You Save: 35%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.54 lbs
Quantity: 
In Stock
Trailer Lights STL8RB - Square - Optronics
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design. Lowest Prices for the best trailer lights from Optronics. Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side part number STL8RB can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (457)
  • Q & A (0)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - STL8RB

  • Tail Lights
  • Square
  • LED Light
  • Red
  • 5L x 5W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Side Marker
  • Side Reflector
  • Rear Reflector
  • Submersible Lights
  • Optronics

5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.


Features:

  • Square trailer light serves 6 functions
    • Stop light, turn signal light, tail light, rear reflex reflector, side marker light, and side reflex reflector
  • Built-in reflex reflector removes the need for a separate reflector
  • Sealed, waterproof construction is submersible
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide better light with less power output
    • No bulbs to replace - no brittle filaments
  • Molded plastic housing and durable acrylic lens
  • Red lens over white LEDs
  • Stud mount with included hardware
  • 3-Wire pigtail
    • White wire is the ground
    • Brown wire is for the tail lights
    • Yellow wire is for the stop and turn lights


Specs:

  • Configuration: passenger's side
    • Driver's side: STL9RB (sold separately)
  • Dimensions: 5-1/16" wide x 4-9/16" tall x 2-5/8" deep
    • Light face: 4-9/16" wide x 4-9/16" tall
  • Distance between mounting studs (center on center): 2"
  • Diodes: 14
  • Power draw at 12.8V:
    • Stop light: 0.259 amps
    • Side marker light: 0.062 amps
  • Lifetime warranty on LEDS


Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



STL8RB Optronics Combination LED Taillight for Trailers Under 80" - Red lens - 11 Diodes

Replaces STL8R3B

Alternate part number: STL8-RB




California residents: click here



Customer Reviews

Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side - STL8RB

Average Customer Rating:  4.9 out of 5 stars   (457 Customer Reviews)

5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.

by:

Exact replacement for my broken tail light. Works great!




by:

this light will work great for my trailer, good price point for a led light




by:

This LED trailer light has performed flawlessly over the year its been installed. The LED'S are bright day or night, and the lense has held up well in the SW desert environment its exposed to. Highly recommended.




by:

This is a replacement Tail light I need, It great I had order Lights from etrailers before. This is the only place I can order just one that all I needed. Thank you so much.


Comments
I purchase to as a replacement for the I damage, its bright and quite visible, outstanding, Like I said before etrailers is the only place where you do not have to order two, you can order one or two. Thank you so much.
Andres G - 11/14/2021


by:

This is the second pair that I have purchased for a PWC and dirt bike trailer. They are excellent. One of the lenses in the first pair was defective. I called Optronics and they immediately shipped me another. Excellent Tech Support. The lights are very bright and so easy to install. Be sure and secure the ground wire to the trailer frame against raw metal (un-painted and freshly ground), or the lights will not perform properly. Also, the washer provided goes on the fixture side of the trailer mount. Locking nuts secure the light on the opposite side with no washer.


Comments
I have since bought two more for my dirt bike trailer. These taillights are exceptional. They are very well made, easy to install and provide BRIGHT red light. I did have to return one of the lights which was defectivenew. You replaced it right away and I have had no further issues. I would highly recommend. Wish you had lights for my Toy FJ40LandCruiser.....
Steve W - 07/24/2014


by:

My Phone call to etrailer answered all my questions on these lights before I placed my order. shipping was right on time.(5days)

This light is a great up grade to the stocks lights that came with my new "Trailer in a Bag". I am looking forward to these LED's working well with all the bouncing road punishment a small trailer has.
I will report again once I have put on 500 trailer miles




by:

Easy install and a nice upgrade from st ock




by:

A great replacement light for standard incandescent tail lights at a reasonable price and these are so much brighter than stock. Installation was a no brainer and took less than a half hour as the bolt pattern is standard and the wires are as well.
Customer service is what sets this retailer apart from the rest!


Comments
After a year and 5000 mi. I had forgotten about these lights. Thats what a good light should be, something you never have to worry about. These lights are just that!
Bud - 07/17/2015


by:

Installed Easy




by:

Fast service




by:

Easy to install and works great!




by:

Sending you a pic of my lights I got from you and the hitch with the full wiring system. All works great. Thank you so much. Now it's time to go riding!!




by:

Best replacement light I've found so far. Set out in the weather 24/7. Easy to install, fit brackets with no modifications.




by:

Perfect replacement for a broken light on my utility trailer.




by:

Still working great after one year on my off-road trailer.




by:

These led's are better than several others I have tried, which all failed in a matter of weeks when exposed to saltwater. It has been about a year and all 20 of the main LED's (10 each light) are still working. However, the side marker lights both failed within a month or two. The lights should probably get 3 stars since the side marker lights failed quickly. Considering that 2 other sets (different brands) began failing one LED at a time immediately upon saltwater exposure, these have been far better, hence the 4 stars.


Comments
After one year all 20 of the main LEDs 10 each light still work. The side marker lights failed quickly. In total, these have held up much better to regular saltwater exposure than other brands.
joseph - 08/10/2020


by:

I ordered the trailer lights on Mon and received them on Thursday. It took about a half hour to install them only because I had to drill holes for the ground wires that the other lights did not have. They are brighter than anticipated and work great. The old ones worked, but you could barely see them except at night. I am very pleased with the product and service (as usual). I have ordered a number of items from e-trailer and will continue to do so. The only problem was that I couldn't find the left hand light. When I called, they had the number for it instantly. Great service and speedy delivery. What more can you ask for. Thanks again.


Comments
These lights still work just like new I buy all my parts from etrailer and will continue to do so. The prices are cheaper than from my local big box hardware store.
Don K - 12/07/2014


by:

Bought a set of these for my boat trailer. install was easy and look great




by:

Product is just as described. Fast economy shipping with tracking. This was my first experience ordering with etrailer. It is very nice to know that there are companies still in this world that make customer service a priority. Etrailer has definitely won my business and I will be ordering more from them.


Comments
Still working great. Still look brand new.
Patrick - 08/19/2016


by:

Light has worked perfectly. LED's are bright, and easy to see!!




by:

Light is bright and sealed from 'Water'- that's what usually kills these. This one's a replacement for one that I broke. They are worth the extra cost. billooltewah




by:

This light is an exact brand replacement for one that I broke. My neighbor has a boat trailer with "waterproof" lights that leak and chronically blow bulbs. I will tell him about these lights--and your great prices and quick service.


Comments
Cool. Like new.
Bud B - 11/11/2016


by:

Works , used to replace broken trailer lights on an old equipment trailer.




by:

easy installation. led, gotta love the brightness!!




by:

I should have purchased these when I first got my trailer. Stock lights were junk and always had to work on them to make sure they were working. A year later with theses new led lights wit zero issues.


Comments
Excellent!
Keven - 01/19/2020

25
457
Show More Reviews

See what our Experts say about this Optronics Trailer Lights



  • LED Trailer Light Recommendation to Reduce Amperage Draw and Prevent Converter Burn Up
    It is very possible that you are overdrawing the taillight converter you have installed on your race car trailer and that is why it is burning up. The easiest fix would be to go to LED trailer lights as they put a fraction of the amperage draw on the trailer wiring when compared to an incandescent. To see all of the LED trailer lights we carry check out the link I attached to the right.
    view full answer...
  • Are the LEDs of the Optronics Light # STL8RB Attached to the Lens or the Housing
    The lens of the LED Submersible Trailer Stop, Turn and Tail Light # STL8RB that you referenced is held on with 4 screws around the outside of the housing. The LEDs on the inside of the light are not attached to the lens. They are attached to the housing. Since the light isn't designed for that type of modification it would be hard for me to safely recommend you do that. An easier option might be to install the # 763560 as this is a capsule designed to replace the light assembly of a taillight....
    view full answer...
    Image 1 for
  • Can Trailer Tail Lights be Grounded to the Towing Vehicle Instead of the Trailer Frame
    When installing the LED Submersible Trailer Stop, Turn and Tail Light, # STL8RB, you will want to ground it to the trailer. Having a ground that is attached to the tow vehicle would be so long it could make the ground ineffective. Also, you would have to disconnect it every time you disconnected the trailer. The movement of the trailer could also pull the ground loose if it were attached to the tow vehicle. If corrosion is a problem, you will need to find the best place you can near the...
    view full answer...
  • New Trailer Tail Lights Blow a Fuse and Cause Lights to Turn Off
    The LED Submersible Trailer Stop, Turn and Tail Light, # STL8RB, comes with one wire for turn and brake functions (green) one wire for tail lights (brown) and a white wire as the ground. The ground wire will need to be attached to a clean and corrosion free metal surface on the trailer. A lot of trailers have tail lights that ground through the mounting studs. These types of lights will also need to be attached to a clean and corrosion free metal surface. A bad or absent ground could...
    view full answer...
  • With Vehicle Head Lights On Trailer Turn and Brake Lights Do Not Work
    The problem you are having is indicative of a bad ground connection. Ground issues usually show up when there is more load on the system. In this case the constant draw of the running lights is causing too much power draw for the weak ground when you try to use another function. Make sure that the main trailer connector ground and the grounds for all of the lights are attached to clean and corrosion free bare metal surface. Anything placed between a ground wire and the metal frame can...
    view full answer...
  • Trailer Lights Flicker After Installing New LED Lights and Rewiring a Car Hauler Trailer
    You have definitely taken all of the correct steps so far. Since you are still experiencing problems after the rewire and installing new lights, I would suspect a ground problem. Especially since you were careful not to pinch or damage any of the new wires. Rust and corrosion can often show up at ground locations where the wires make contact with the metal. If you used any of the original ground screw holes, I recommend moving them to a clean bare surface on the trailer frame and scrape...
    view full answer...
    Image 1 for
  • Replacement LED Submersible Tail Light Recommendation for One that Fell Off
    The LED Submersible Trailer Stop, Turn and Tail Light # STL8RB that you referenced would work as a replacement right-hand (passenger side) trailer light. This light attaches with the mounting studs on the back of the assembly with the included nuts. I attached a review video and an FAQ article on trailer wiring for you to check out as well. If your trailer lights look differently than the # STL8RB email me back with a picture and I'd be more than happy to help you.
    view full answer...
  • Will Water Get Into LED Trailer Tail Light # STL8RB and Short Out the Light
    The LED trailer light # STL8RB is submersible meaning that water can get in but the lights are sealed so the water will not short them out. If you were to seal up all the holes in the back of the light then no water could get in at all and it would not be an issue. Since the lights are sealed on the inside water would not be an issue either way.
    view full answer...
  • Could Optronics Trailer Light # STL8RB Be on Both Sides of Trailer If Plate Light Wasn't Needed
    There's no reason you couldn't run a Optronics Trailer Lights # STL8RB on both sides of your trailer.
    view full answer...
  • Troubleshooting Right Blinker/Stop Light Not Functioning on a Trailer
    The first thing I would do is check the ground on the right tail light assembly. The ground may not be strong enough to carry the amperage.You will want to make sure the ground is attached to a clean metal surface or if the assembly grounds through the mounting hardware you will want to make sure that surface is a clean metal surface too. Since you have voltage at the connector you know the problem lies somewhere between the connector on the trailer and the light assemblies. Most likely...
    view full answer...
  • How to Ground the LED Submersible Light part # STL8RB
    The LED Submersible Light part # STL8RB that you referenced would work perfectly for you. You would match the brown and green color wires of the assembly to the brown and green wires of your trailer and then would run the white wire to a clean metal surface that touches your trailer frame. This is the ground circuit. Your old light assemblies probably grounded through the mounting hardware. If so, you could just put the ring terminal of the white wire on one of the mounting studs of the...
    view full answer...
  • Right Side Trailer Brake and Turn Signal are Not Working but All Other Lights Work
    This is a classic ground problem, especially since everything else is working. It could be at the trailer connector, vehicle or trailer side, or at the light itself. Start with the vehicle side connector and make sure it is properly grounded and that any corrosion or dirt is cleaned out of the connector. Then do the same with the trailer side connector and the main ground for the trailer. Some lights ground through a wire and others ground through the mounting studs. In both cases the...
    view full answer...
  • Turn Signals and Tail Lights Blink on Trailer After Installing LED Bulbs
    It sounds to me that when you activate the left turn signal, the tail light signal (lower intensity signal) on the right tail light blinks. My first thought is there is a wiring or ground issue somewhere on the trailer. It may have not been immediately evident with the incandescent bulbs because they require more power to function than LED bulbs. LED bulbs require only a fraction of power to function and any type of power issue could trigger other lights to function. To troubleshoot this...
    view full answer...
  • Left Turn Signal is Dim and Left Brake Signal is Bright on a 2010 Heartland Edge M18 Trailer
    I would suspect a poor ground connection as well. It is odd that the brake signal is bright and the turn signal is dim because those signals typically run through the same wire. Any time there is a loss of power or brightness, a ground issue is the likely culprit. It is also important to check for the ground issue first because a new light will have the same problem if there is a poor ground. I did some research on your trailer and found that it probably has an aluminum frame. Finding...
    view full answer...
  • Will the LED Submersible Trailer Stop, Turn and Tail Light # STL8RB work on a EZ Load Boat Trailer
    It sounds like the two wires on your trailer wiring are for the stop/turn and tail light functions and the ground is through the mounting hardware of the light assemblies. The # STL9RB and the # STL8RB should still work well for you. You will just need to ground the white wire so that everything will function. Check out the review video for this video I attached and the FAQ article on trailer wiring.
    view full answer...
  • Trailer Clearance Lights Blinking with Turn Signal
    It sounds like you might be getting some bleed-over from the turn signals occurring in the trailer connector. Take a look at the trailer connector, and check the plug for corrosion in the sockets. If you see any green or white corrosion in the sockets, then there is a good chance it has spread to the interior of the connector, to where the wires attach to the plug terminals. Once this corrosion starts building up, it can actually contact adjacent terminals and cause signal bleed-over. You...
    view full answer...
  • Troubleshooting Trailer LEDs that Don't Work that Are Replacing Incandescent Bulbs
    If you tested the LEDs and they work when they have power and ground the problem has to be the wiring of the trailer. Since previous lights worked there it would seem that the problem may be somehow ground related. Some assemblies ground through their hardware and other ground through a wire. I attached a couple help articles that might be informative as well.
    view full answer...
  • Distance from Center of Mounting Stud to Top of Trailer Taillight # STL8RB Base
    From the center of the mounting stud to the top of the back of the light base is 1-13/16 inches on the LED Submersible Trailer Stop, Turn and Tail Light # STL8RB.
    view full answer...
    Image 1 for
  • Recommendation to Add Extra Right Tail Light on Trailer
    To add an extra tail light to your trailer, I recommend using a Trailer Tail Light like the Optronics # STL8RB. This light will give you stop light, turn signal light and tail light functions and will mount to any surface using the included studs. You will simply splice the wires into the existing tail light wiring of your trailer. The white wire will be grounded, the brown wire is for the tail lights and the yellow wire is for the stop and turn lights. I have attached a video review...
    view full answer...
  • With Turn Signal and Brake Lights On All Trailer Lights Flash when Connected to 2007 GMC Yukon
    It sounds like there may be a ground problem or a possible overload. Ground problems and overloads normally show up when there is more draw on a system such as when you have the running lights on and then use another function like a turn signal or brake light. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should...
    view full answer...
  • Troubleshooting Trailer Wiring That Stops Working with Vehicle Headlights On
    It sounds like you might have a bad ground connection. When the headlights are on, that is when there is the most power draw on the system. Stepping on the brakes would then add more and this is when a ground problem will usually show up. The taillights usually ground through the mounting bolts on trailers. Check for a bad ground, loose connection, and dirt and corrosion. Any of those can cause this problem. Also check the light bracket connections to the trailer frame as lights can ground...
    view full answer...
  • Troubleshooting Trailer Lights Where Turn Signals are Dimmer than Running Lights
    Sounds like you have the circuits backwards and have the running light circuit ran to the stop/turn circuit of your trailer lights and then have the stop/turn circuits of the trailer ran to the running light circuit of the taillight. Try just swapping those two connections and the problem will be fixed.
    view full answer...
  • Can Optronics Tail Light STL8RB be Used for Brake and Running Lights on a Quad
    Technically, yes, you could use trail tail light # STL8RB as a brake light and running light on a quad. The white wire is ground, brown is for the running lights, and green will be for the brake light.
    view full answer...
  • Troubleshooting Trailer Light Assembly that Doesn't Get Brighter with Blinker/Stop Light
    Sounds like the brighter stoplight/turn signal function of your taillight isn't working. This is typically caused by the running light circuit of the trailer wiring being ran to the stop/turn circuit of the light wiring. Make sure the stop/turn circuit is ran to the green wire (if you have the STL8RB) and not the brown wire which would be the running light circuit. Also verify that the stop/turn circuit is making it back to the assembly and that a short isn't taking preventing the circuit...
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Brian T
Updated by:
Brian T
Employee Dustin K
Video Edited:
Dustin K
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390