bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. Kit
  6. LED Light
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

Item # TLL56RK
Retail:$131.24
Our Price: $71.79
You Save: 45%
Trailer Lights
Shipping Weight: 3 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector. Great Prices for the best trailer lights from Optronics. LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger part number TLL56RK can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (320)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - TLL56RK

  • Tail Lights
  • Rectangle
  • Kit
  • LED Light
  • Red
  • 6L x 3-1/2W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.


Features:

  • Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide
    • Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light
    • Built-in license plate light on driver's side light
  • Waterproof housing and lens unit is submersible
    • Great for marine trailer applications
  • LEDs make great replacements for incandescent lights
    • No bulbs to replace
    • No brittle filaments
  • Corrosion-resistant license plate bracket
  • Durable polycarbonate housing and acrylic lens
  • Red lens over clear LEDs
  • Universal mount
    • Stainless steel mounting hardware included
  • 25' Wiring harness with 4-pole connector
  • DOT approved


Specs:

  • Application: trailers under 80" wide
    • Driver side: STL57RB
    • Passenger side: STL56RB
  • Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep
  • Number of diodes:
    • Driver's side: 23
    • Passenger's side: 18
  • Power draw at 12.8 volts:
    • Stop and turn lights: 0.268 amps
    • Side marker lights: 0.059 amps
  • Lifetime warranty on LEDs


Optronics TLL56RK LED Combination Tail Lights for Trailers Under 80 Inch Wide Diagram

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



TLL56RK Optronics LED Combination Tail Lights for Trailers Under 80" Wide - Submersible - 40 Diodes - Driver and Passenger Side - 25 Ft Harness

Alternate part number: TLL-56RK




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger - TLL56RK

Average Customer Rating:  4.8 out of 5 stars   (320 Customer Reviews)

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

by:

After some light disassembly, these fit perfectly under the OEM lens covers of our vintage 1976 apache ramada. LED everything now!



by:

Bright and works. One issue is right side passenger side blinks different and not as Bright as the left one.



by:

Very satisfied. E-trailer had the right fit as I am replacing the tail lights. They were here in a timely fashion.

Thankyou

Gary

6/17/2023

still working as they should thankyou



by:

DURABLE BRIGHT QUALITY. I've taken my trailer and these lights all around North America (California, Yukon, Texas, Key West, Newfoundland) they have never let me down.

Rob

6/21/2022

Bought these lights for my Karavan Double Sea-Doo trailer, excellent lights, better quality than the marina and better quality than the stock ones that came with it. Ver happy with them. All wiring was perfect and durable.



by:

The lights came well packaged. All parts were included in a parts bag. I have some doubts as to the quality of the wiring connectors (3M 801). The white grounding wire is too short. I ran two additional lengths of ground wire directly to the lights and eliminated any trailer body induced grounding problems. The stainless bolts were 1/4" and I thought flat washers should have been included along with the stainless lock washers. I went to the local hardware store and purchased 4 each 1/4" flat washers to complete the installation. There was more than enough wire for my small PWC trailer. Installation was straight forward. The lights look very nice and are bright even in the daylight. Worth the purchase price.

Tom S.

10/27/2017

Thanks for the follow up email. Everything is fine and I am satisfied.



by:

Awesome direct replacement for my boat trailer. Much brighter than original that came on trailer

Dennis

6/8/2023

Still working as good as new

Etrailer Expert

Mike L.

7/7/2023

@Dennis We're glad to hear that the # TLL56RK taillight kit is still working well for you!


by:

These are the best quality lights ever made and have used them for the last 20 years on several boats without fail because they really are waterproof. But the wiring harness and hardware is not but that's OK, just use your own stainless steel hardware and a more robust harness and your golden. FYI Over the years I've used every heat shrink wrap and other alleged waterproof products for connectors that have always failed. Hint, strip wires and twist the leads, fold them over and trim, then use electrical tape. If tightly wrapped with an ample amount of tape it will never fail and this includes below deck. fittings, ain't pretty but for me it's always been bullet proof.



by:

Perfect size for small trailers. Arrived fast and in perfect condition.
Also purchased (and installed) two of the the Wesbar LED Trailer Clearance or Side Marker Light w/ Reflector - 1 Diode - Black Base - Amber Lens - 47-222012. Great products.



by:

Great trailer lights.



by:

Great product. I had to search a lot of different sites to find this size (roughly 6"x3.5") in a LED package because it had to fit my trailer bracket for the lights. As you can see in the picture the bracket protects two sides of the light so I needed the same size as the old ones. Thankfully eTrailer.com had the kit and it shipped within 24 hours. It bolted right on and everything I needed was included in the kit. Very happy with the product and the order process and shipping time from eTrailer. I would recommend this product to anyone.



by:

This is an excellent kit which seems to be a very good quality and is quite easy to install on the trailer. This will permit me back my trailer into the water without having to unplug before getting the lights wet. Also I would advise anyone doing a trailer wiring to keep in mind that if problems arise it most likely is due to a poor ground wire connection. The only problems I had with the lighting installation was due to ground wire not having sufficient contact.



by:

The trailer these lights are installed on is used only during waterfowl hunting going into blackish water, swamp water, ice and snow and traveling through 3 states I hunt. I'm going into my second season and all the LEDs are lite.



by:

Couldn’t be happier! Installation (removal of old bulb-type tail lights) and installed these in under 30 minutes. These lights are SO MUCH BRIGHTER!! Will definitely purchase again. Highly recommend these lights to whoever needs new trailer tail lights.

James

8/22/2022

One year later and these lights have not disappointed. They’re working as well as when installed. Great product, price, shipping and an easy install. What’s not to like?



by:

Submerged over 40 times still work great

James

8/19/2023

Still working great



by:

Very slight modification to make fit but was easy enough. Work well after one year of use. Worth the money.



by:

Easy install. Everything I needed



by:

Finally found led replacements that fits perfectly on my 1985 ez loader trailer!!! They were exactly what I was looking for. They are bright and look awesome!!!!!



by:

Lights are great quality I love the LED, the only downside is I had to buy my own hardware an connectors because the one you guys send are not good for water, if the connectors were water resistant it would be great an better hardware.



by:

LED lights on tail light kit is more than generous. It was easy to rewire into trailer. The only difficulty and perhaps my error is to wire it together with the old set for serious turning and stop signals. I drive mostly highways, curvy, etc and want my trailer to be noticed before a costly accident.
The light set came quickly and as depicted in advertisement. Thanks for a good purchasing choice.



by:

Product worked perfectly. More important; I experienced the best Customer Service
in many years. It seems no Company cares about the customer. Jessica B.
was outstanding. From information, shipping to meet my needs to the follow-up
for delivery. I work for a Fortune 100 company for 32 years our customer service
had not matched this in over 15 years. Thanks for your product knowledge and
making a difference in customer satisfaction. Refreshing !! I will definetly be a returning customer and refer etrailer to my friends.



by:

Great customer service, took the time to make sure of what I needed. Prompt delivery and follow-through with my trailer lights & wiring order!



by:

Shipped on time. arrived without damage and worked perfectly for the use intended.



by:

Changed my Shoreland’r boat trailer lights to
LED, used your product combination
Tail light kit, after 1 year still works
great I recommend this product.
No more changing bulbs



by:

exactly as described, fit perfectly. Th anks!



by:

Great product, came with more than I needed for the job. Very bright!


25
320
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Mounting Bolt Pattern of Optronics Trailer Light Kit TLL56RK
    The distance between the mounting holes of the Optronics trailer light kit part # TLL56RK is 2 inches like you mentioned needing. The distance from the mounting holes to the top of the light is 1.825 inches.
    view full answer...
    Image 1 for
  • Does LED Tail Light Kit TLL56RK Have Side Marker Lights
    The description of the LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK does specify that the lights have a side marker function (in the second line under "Features"). I have added a link to a help article which details trailer lighting requirements, which are different not only for different trailer widths, but also lengths and weights. I have also added a link to a video installation I recommend taking a look at which details the side marker function of the LED...
    view full answer...
  • Wire Gauge Used for the Optronics Waterproof Trailer Wiring Harness # TLL56RK
    The wire for the Optronics Waterproof Under 80 Inch LED Harness # TLL56RK is 20 gauge copper wire.
    view full answer...
  • Replacement LED Tail Lights for 2017 Karavan LB-2200-70-17-SF-ST2-CR Boat Trailer
    For LED tail lights for your 2017 Karavan boat trailer I recommend the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger # TLL56RK. These lights are virtually identical to the lights that came with the trailer so they will make a perfect replacement. They are 6-1/16" wide x 3-5/8" tall x 2-1/4" deep and come with a 25' wiring harness with a 4-way connection. These lights are waterproof and the built in license plate bracket is corrosion resistant....
    view full answer...
  • Is Conspicuity Tape Required for Use on Trailers Less Than 80 Inches Wide
    According to the regulations (see the link I provided) conspicuity treatments are NOT required for trailers that are under 80 inches wide. This being said, it's never a bad idea to make yourself more visible to traffic but it's not a requirement.
    view full answer...
  • How to Determine if Wiring Harness Included With TLL56RK Trailer Wiring Kit is Long Enough
    When I rewired my PWC trailer, I used a length of string to run from the trailer coupler back to each lamp then measured the string. I then added about 5 feet to that length for good measure to account for the length needed to reach the connector on the vehicle. The # TLL56RK kit includes a wishbone-style harness that is 25 feet in length, which I'd consider a great choice for a trailer up to 20 feet in length. If you click the provided link, you can see video showing the # TLL56RK kit...
    view full answer...
  • Upgrading Pop-Up Camper Taillights to LED
    Although they are a bit smaller than the lamps you are replacing, the Optronics # TTL56RK light kit would work great for you. The lamps would provide the same tail light, turn signal and brake light functions as the lamps you are replacing. The drivers side lamp will also provide illumination for the license plate. The only spot where you might have an issue would be in how the lamp attaches to the camper. The TLL56RK lamps are bolt mounted, with the head of the bolts fitting into slots...
    view full answer...
  • Mount Stud Dimensions for Waterproof, Under 80" LED Trailer Light Kit # TLL56RK
    Yes, the mounting hole distance on the lights of the # TLL56RK that you referenced are 2 inches apart on center. These will fit in the space you have that's 6 by 3-1/2 inches as well.
    view full answer...
  • How Does Wiring of Trailer Lighting Kit # TLL56RK Usually Route on Trailer
    The harness that comes with the # TLL56RK is 25 feet in length. Depending on how your trailer is set up you could easily run wires to either side or down the middle and then split off. For more info on this I attached an install video for this for you to check out as well.
    view full answer...
  • What is the Wire Gauge of Optronics Waterproof Trailer Wiring Harness # TLL56RK
    The wire for the Optronics Waterproof Under 80 Inch LED Harness # TLL56RK is 20 gauge copper wire.
    view full answer...
  • Replacement Taillights for EZ-Loader Trailer
    We carry all sorts of replacement trailer lights including taillights that you can see on the linked page. Since trailer makers do not maintain detailed specs on the lights they install during production you can match up the size, shape and functions of your taillights to those we offer, or you may be able to find a brand name and/or part number on the light base (not the lens). You can use the click on filters on the linked page to narrow the presented items to just those that match your...
    view full answer...
  • Required DOT Lights for a Pop-Up Camper
    For light requirements you have to look at the total length and width of the trailer along with its gross capacity. The 1987 Coleman Sequoia is 14 feet, 11 inches long and 6 feet, 8 inches wide. That makes the trailer right at 80 inches wide, but less than 30 feet long and the gross weight will be less than 10,000 pounds. If you go with the under 80 regulations, which is likely how Coleman manufactured this trailer because that is how it is set up then the trailer will need to have: Back 2...
    view full answer...
    Image 1 for Image 2 for
  • Where Is Trailer Measured To Determine What Lights Are Required
    Actually, the width of a trailer is determined by it's widest point. If the wheels are outside of the frame of the trailer then the width is measured for that trailer from outside of the fender to outside of the fender on the other side of the trailer. If the wheels are under the trailer frame then the measurement is taken at the frame width only. I have attached a helpful article that explains how to measure a trailer and the article has also got a complete breakdown of the lights...
    view full answer...
  • Side Marker Lights Required for Trailer Wider Than 80 Inches and Longer Than 30 Feet
    If your trailer is more than 80" wide and 37' long then you need 2 rear side marker lights, 2 rear side reflectors, 2 front side marker lights, 2 front side reflectors, 2 intermediate side marker lights and reflectors, as well as 2 front and 2 rear clearance lights. I have attached a helpful article that explains how many lights you need for different trailer variations and I clipped the parts specific for your trailer for you to check out. We have an abundance of lights and wiring as...
    view full answer...
    Image 1 for Image 2 for
  • What Does it Mean when a Trailer Light is Listed as Waterproof or Submersible
    When it comes to trailer taillights the terms waterproof and submersible are somewhat interchangeable. If a taillight is considered submersible that means that the internal circuits are waterproof and would be protected for if you were to back the trailer into water like when launching a boat. The part # TLL56RK that you referenced is listed as waterproof and submersible so it would work great on a boat trailer. Lights that aren't waterproof or submersible will still work just fine on...
    view full answer...
  • Are Submersible Trailer Lights Guaranteed Against Leakage
    I have an explanation for you. Light kits like the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible part # TLL56RK and other submersible trailer light are actually a little confusing. They are not completely sealed, if fact it is just the opposite there are drain holes on the light that will allow for the water to drain out of the lights after they have been submerged. On incandescent type submersibles there is a thin plastic shield around just the bulb to keep cold...
    view full answer...
  • Trailer Lighting Kit Recommendation for a 7 foot by 14 foot Utility Trailer
    I attached a picture that details all of the required lights and reflectors for a trailer that is over 80 inches in width and shorter than 30 feet in length like what you have. Based on the dimensions of your trailer that you listed a center marker light is not required. For a similar light kit that comes with everything needed to the part you referenced you would want the part # TLL36RK. I attached a review video for this light kit plus a help article trailer light regulations for you...
    view full answer...
    Image 1 for
  • Replacement Tail Light for 1990 Douglas Boat Trailer
    All of our Wesbar Tail lights that are incandescent bulbs use a 1157. To get your replacement bulb, you will need to remove the other bulb and read the number on it. Since you seem concerned about breaking your lights, it may be a good time to consider upgrading your tail lights. I recommend the following LED options: Waterproof, Over 80" LED Trailer Light Kit # TLL160RK Miro-Flex LED Trailer Tail Lights # TLL28RK Waterproof, Under 80" LED Trailer Light Kit with 25' Wiring Harness # TLL56RK
    view full answer...
  • Will Switching to LED Lights on Trailer Prevent Fuses From Blowing on 2013 Honda Pilot
    What I can tell you is that switching from incandescent lights to the LED Combination Tail Light Kit # TLL56RK for your ShoreLand'r trailer will 100 percent prevent you from continually blowing fuses. The reason is the minuscule power draw of these lights, with the stop and turn lights drawing about 0.27 amps and the marker lights about .06 amps. Your problem will definitely be solved in that regard. What we don't know for sure is everything the fuses on your 2013 Honda Pilot serve. I...
    view full answer...
  • What do I Need to Completely Replace my Boat Trailer Lights
    I really like the LED Combination Tail Light Kit for Trailers part # TLL56RK. It offers LED lights which you won't have to be replacing bulbs in and with the submersible design you won't have to worry about water. It has the 4-way connector to connect to your Pathfinder and the wiring to make all of your connections. It also has the hardware for connecting the lights to the trailer. If for some reason your lights are different looking than these or you would like a different type please...
    view full answer...
  • Submersible LED-Type Trailer Lights for 18-Foot Boat Trailer
    We do offer a range of fully submersible boat trailer lighting, in both incandescent and LED types, that can be seen on the link provided. You can click on the filters in the left-hand margin to narrow the results based on shape, color, size, bulb type and mounting style.
    view full answer...
  • Trailer Light Kit With Tail Lights & 4-Flat Connector
    We absolutely have a tail light kit you can use with two tail lights as well as a 4-flat connector, which is the following: - LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK This comes with driver and passenger side tail lights, hardware, and 4-flat wiring harness, and will work with any type of vehicle that has a 4-flat. It also comes with a license plate bracket standard which you can use if need be but don't have to. I have added a link below to a video install...
    view full answer...
  • How to Determine Correct Tail Lights for Boat Trailer
    There is a way for you to pretty easily find out the tail lights you need, although the SAE numbers just means it has been approved by the Society of Engineers and aren't a part number, and we don't have any way of knowing specific lights for any trailer. So you will simply need to measure your current tail lights and find the one that most closely matches your measurement, and also know if your lights are surface mounted or recessed mounted. For example, the Optronics LED Combination...
    view full answer...
  • Replacement Taillights for Boat Trailer
    I took a look and the Replacement Tail Light Lens for Optronics ST36RB and ST37RB # A39RB is nearly 8 inches wide and the screw holes are quite a bit further apart than 6-1/2 inches. I also checked the other Optronics lights and none have the dimensions you are looking for that I can find. The best option we can give you are replacement taillights, which are a good idea as well because you can upgrade to LED lights. These draw much less power and are guaranteed to last for life. If your...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Tyler C
Written by:
Tyler C
Employee Joshua S
Video Edited:
Joshua S
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.