Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
5-1/2" Diameter round. Incandescent trailer light provides backup light function. Durable stainless steel housing. Retainer ring protects light against vibrations. Flush mount with flange - hardware not included. 1-Wire design. (1) 1156 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck-Lite # 80344
Grote # 62151
Optronics # BU41CB
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Peterson trailer backup light with the stainless steel housing and the clear lens. This is an incandescent trailer light that'll provide a backup light function for trailers or utility trucks. It does use an incandescent bulb, can be to replace. It's a bulb type 1156. Has this nice clear lens over the incandescent bulb, and the lens is held in place by this metal retainer ring on the outer edge, here. That's how you'll access to replace the bulb.
If you put a screwdriver in there, pop that retainer ring out, the lens'll come out, and you can access replacing the bulb.It's a durable stainless steel housing that resists rust and corrosion. It is a flush-mount design, has the built-in mounting flange. The hardware to install this is not included. Does require a four and a half inch diameter hole for installation, and this light is compatible with 12 volt DC systems. It is a single-wire design, and when you hook up this wire to your backup light, it'll ground through the mounting hardware.
This light is DOT, Department of Transportation, compliant, and it is made in the USA.A few dimensions on this. The overall width of it, including the flange, is right at five and a half inches. The depth of it is going to be right at one and five-eighths inches, and the light face itself, the lens portion, is four inches. The distance between these mounting holes .. There's three mounting holes, the bottom one is sort of an elongated one.
But the center-to-center on all of them is going to be four and a quarter inches. Bulb type, we mentioned, is 1156. The power draw on this at 12.8 volts is 2.1 amps.The last thing I'm going to do is hook this up to some 12 volt power, just so we can see how bright it is. What we're going to do is go ahead and take the power wire, and we'll go ahead and hook that up to our single wire, and then we'll take our ground wire and let's see if we can get a ground. I'll hook it to the stainless steel housing and see if that'll give us a ground.
I'll go ahead and turn on our power. Yeah. This is a good enough ground. There's your backup light. We'll go ahead turn off the overhead lights. You can see it has a very bright backup light to it. You can go ahead and turn back on the overhead lights. Disconnect our wires.That should do it for the review on the Peterson trailer backup light with the stainless steel housing and the clear lens.
Average Customer Rating: 4.8 out of 5 stars (15 Customer Reviews)
5-1/2" Diameter round. Incandescent trailer light provides backup light function. Durable stainless steel housing. Retainer ring protects light against vibrations. Flush mount with flange - hardware not included. 1-Wire design. (1) 1156 bulb.Good parts and delivered quickly. Was a direct replacement for arrow light that wasn't made anymore.
Product was great! Bolted up & functioned the way it’s supposed to. Website was good and a simple phone answered my questions. Great experience.
I purchased this product to replace original equipment that became rusted after 6 months of camping in an Oceanside RV park. I am back at the same park this year and the new lights have been working well and show no signs of rust. This is a 5 star product.
Lights fit perfectly and are the exact style for the vehicle they are mounted on (1956) school bus. Ordering was easy and delivery was quick!
Great light. Used it as an interior light on my stick trailer and works perfectly.
Good ServiceProduct arrived quickly in excellant condition. I'm sure glad I found etrailer. Good folks to do business with.
I am happy with this purchase
Just as advertised, great service.
Built to lastnice construction...will last a long time. mounts easy after hole is cut. looks great
Great service
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stan T.
9/30/2021
working as I had hoped. Only thing was the hitch stabilizer didnt work so I purchased one that does.