7-7/8" x 3-5/8" Oval. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts standard 3-prong plug.
Features:
Specs:
This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (sold separately).
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at a Peterson LED Trailer Tail Light. This is an oval trailer tail light that serves three functions, such as your turn signal light, tail light and brake light. Now, this is an LED unit. LEDs make great replacements for incandescent lights. They last longer. They burn brighter.
They're more efficient. With LEDs, you don't have to worry about replacing bulbs or worry about brittle filaments.We have a nice red lens with a black base, so it has the black flange. It is a recessed-mount installation with the built-in mounting flange. That's a really nice design. Mounting hardware not included.
This is designed to fit in a 6-3/4" long hole measure 2-1/2" this direction. Now, we can tell that because right here printed, or labeled, on the actual flange, it says, slotted hole size 6.75" by 2.50". Again, this is designed to mount inside of a hole that measures 6-3/4" by 2-1/2". It accepts an industry standard three pronged plug which is sold separately and available at etrailer.com.It's Department of Transportation compliant. It meets FMVSS108 requirements for automotive lighting.
It features a nice sealed design so it's protected from the elements. The product is made in the USA. When it comes to the overall dimensions, we'll take a look at those and then we'll hook it up to power. Edge to edge going in this direction, measures about 7-7/8". Edge to edge going in this direction is about 3-5/8".
The lens going in this direction measures 2-1/4" by 6-1/2". The mount holes, side to side are separated apart from one another on center, by 4". Going in this direction, they're separated on center by 3".All right, we're going to go ahead and hook it up to power, that way you can see what it looks like with power running to it, and then we'll turn off our overhead lights so you can see it in a low light setting. This is the taillight function. Then when we apply the brakes, the signal output increases. Does that same thing when we activate our turn signals. Now, it contains a total of seven diodes, or seven LEDs, so the multi-diode design really helps optimize the overall light output. Also, LEDs have a much faster response time when compared to incandescent. The rated input voltage is 9 volt to 16 volt DC.That's going to do it for today's look at the Peterson LED Trailer Tail Light.
Average Customer Rating: 4.6 out of 5 stars (117 Customer Reviews)
7-7/8" x 3-5/8" Oval. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts standard 3-prong plug.Sure would’ve been nice to know the mounting flange and enclosure is plastic.... not one place in the description or video.... disappointed
Thank George J for keeping me inform about my BO lights . Will do business with you again .
Having stuff in stock means a lot these days, fast & friendly service. Great people to work with also.
I replaced the entire running lights system and the LED lights are high quality and work great.
The running lights and backup lights are all amazingly bright!
I really appreciate that they help keep my trailer visible and safe!
The installation was done without problem and the lights worked as expected.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
The lights look ok, but I haven't gotten them installed yet. My main complaint is the packaging, because everything I ordered was thrown loose into one box. You need to do better to ensure nothing is damaged during shipping.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
The light is very bright and is good quality I love it
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
perfect timing on the ETA of parts Thanks alot
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
I used these to replace the tail lights on my utility trailer. They are bright and because they are LED they will not require any attention. I look forward to many years of reliable service.
Easy installation. Working perfectly after 1year
Exactly what we were looking for. I do think the description needs to be more clear as I ordered an extra wire that actual came with the light. Other than that received the product earlier than expected and we were able to finish the job for the customer sooner.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.