Arrives before Christmas 
2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 2-prong plug. PC rated.
Features:
Specs:
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side maker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Steven here with etrailer.com. Today we're looking at our Peterson LumenX LED clearance and side marker trailer light. It is a submersible light, and it's obviously a round shape and amber lens. Now folks, the LED trailer light functions as both a clearance and side marker, because it's what's called a PC-rated. So a PC-rated light basically produces a 90-degree angle of light to either side of its center line. And that's gonna give you a total of 180 degrees of coverage.
So the beam pattern can be clearly seen when you're either standing directly in front or as well as either side of the light when it's properly installed. And it can function again as both a front clearance light and a side marker. As you can see, the connection points are down inside of there. You would need a industry standard two-prong plug and a recessed PVC ground, and both of those sold separately. It is a 12-volt compatible light.
And again, this is an amber lens over the LEDs. Now, LEDs, as you know, are more efficient. They're brighter. They last longer, and they basically gives you a light that eliminates the entire lens. So and again, in this case, it is a sealed housing, so you don't have to worry about water getting in there.
It is waterproof and it has five diodes inside. It's two inches diameter and about 1 1/2 inches deep. Well, that's gonna wrap it up, folks. I'm Steven, thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.