bing tracking image
  1. Trailer Ramp Springs
  2. M-3 and Associates
  3. Dual Ramp Spring
  4. 84 Inch Wide Doors
  5. Conventional
  6. 81 Inch Wide Spring
Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity

Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity

Item # ERS120D81
Our Price: $271.75
Trailer Ramp Springs
This item qualifies for Free Shipping
Shipping Weight: 26 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 7' wide trailer doors. Great Prices for the best trailer ramp springs from M-3 and Associates. Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity part number ERS120D81 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (256)
  • Q & A (0)
  • Photos
  • Why etrailer?

M-3 and Associates Trailer Ramp Springs - ERS120D81

  • Dual Ramp Spring
  • 84 Inch Wide Doors
  • Conventional
  • 81 Inch Wide Spring
  • 120 lb Capacity
  • M-3 and Associates
  • Steel

Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 7' wide trailer doors.


Features:

  • Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
    • Helps to take on the weight of your trailer door so you don't have to
  • Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury
    • If one cable falters, the other spring will prevent the trailer door from freefalling
  • Spring reduces wear and helps prevent damage to door hinges
  • System can be modified to fit your specific application
    • Slide the bracket and cable drum down and cut the shaft to a shorter length
  • Yellow safety covers install on top of the bolt heads to prevent any unwanted adjustments
  • Sturdy steel construction
  • Made in the USA


Specs:

  • Application: 7' wide trailer door
  • Dimensions: 81" wide
  • Spring capacity: 120 lbs
  • Cable length: 150"
  • 1-Year limited warranty


Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.



9500470 M-3 Enclosed Trailer Ramp Conventional Springs - Dual Spring - 120 lbs - 81"





Customer Satisfaction Score:


Customer Reviews

Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity - ERS120D81

Average Customer Rating:  4.7 out of 5 stars   (256 Customer Reviews)

Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 7' wide trailer doors.

by:

Spring assist door ramp works perfect!




by:

This unit looks real nice going to install it soon arrived in good time considering it had to ship to Alberta Canada the price is decent the tracking was perfect thanks sure are easy to deal with




by:

Bad service


Comments
I am sorry to hear that you are unhappy with our service. I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 09/20/2022


by:

Directions can be a little confusing, since I installed this on a she door, not a enclosed trailer. Left and right are painted and all was clear except on which way cable winds on drums, according to rep you wind it thru front unlike a garage door. Called to confirm because drums are labeled r and l but are reversed as your installing it,which prompted a call call.


Comments
Thanks for the follow up Brandon. This system is set up so that when you are in the trailer or shed in your case looking out of the down door, the end with the black cable drum and the red winding cone should be on your left. If you are not comfortable or experienced with the installation of torsion springs, it is highly recommended that a local garage door company complete the installation.
-- Etrailer Expert Rachael H - 05/31/2018


by:

Already pre-assembled for the most part....I like the instruction method for setting spring tension....everything seems to be working as it should




by:

Works great on the ramp door that I built for a storage shed to keep golf cart in.




by:

I installed this on a heavy fold-down ramp door that I made for hauling my Jeep in an enclosed trailer. The ramp was so heavy that I couldn’t hardly lift it by myself. I bought the dual spring model because I thought I needed it, but I don’t. One spring is all I needed. I can now lift the heavy ramp door with one hand.


Comments
A year later and I’m still very pleased with this spring assembly. Has made my life much easier. Definitely would recommend this product.
Rick - 12/03/2020


by:

Haven't put on yet but seems like it will be great




by:

Great service from etrailor shipper sure beat up box but appeared OK a little tweeked but should work.




by:

This enclosed trailer door ramp spring pulley system is great. It is so smooth unlike the one that came wiyh my pace American trailer. Doesn't grind or squeek. Does exactly what it is supposed to for an outstanding price! Trust me, I did the research. I had to install by myself and it wasn't bad at all. Should have read the directions first so I had it turned around the wrong way. Lol. But it was a 2 minute fix to get back on track. I really am glad I found this.
Definitely would recommend.




by:

I ordered the assist ramp lift because my ramp door was too heavy for me to lift by myself. After installing the assist lift correctly a 12 year old can lift the ramp door using only one hand. I recommend this product and the price is very reasonable for what you get with this company.


Comments
Im very happy I purchased the assist ramp lift. It is still working great after a year of using it.
Charlotte P - 02/02/2018


by:

Very easy to order, Quick deliver, the parts arrived in good condition even thogh the boxes was ripped open during shipping, I have not had time to install it yet o
. so no picture is available.


Comments
Easy to install, work great. money well spent.
John W - 09/16/2020


by:

First off, Deborah was awesome to deal with and had the ramp door spring shipped super fast. Thank you!
I had never installed a torsion spring and this one took me two hours, including removal of the old one off a Pace cargo trailer. You might need to cut off part of the tube ends to fit your application. I put a grinding wheel on my skilsaw and chopped off 3 inches from each end. I used my existing mounts on the header and so I removed the ones on the new spring assembly...4 bolts. The mounting plates on the assembly are easy to slide to fit my application. Installation onto the header was very quick and easy. Again, four bolts that are a bit soft and easy to strip...I used my existing hardened bolts that were exact match in every respect...only harder alloy. The cables came next. I suggest using existing hardware if it's in good shape. The provided pins and cotter pin mount left too much slop at the ramp. Good bolts and a good locking nut was what I used and allowed for plenty of relaxed movement without compressing the eye of the cable end. Vise grips come in handy when rolling the cable on the drums as you'll want to keep the bar assembly from moving while loosening the drums to roll up the slack of the cables...tighten the two set bolts on each drum and you're ready to start winding the springs. Make sure the BLACK drum is mounted to your left while looking out from inside the trailer or the entire assembly will need to be flipped. I used some rebar for winding rods and ground them down a touch to fit easily inside the cavities of the spring winder. This worked well for me, but the proper winding rods are no doubt safer and should be used or simply get a professional garage door company to do the winding part and balancing for safety reasons. Once wound according to the instructions, lock the set bolts onto the rod and you can remove the winding rods. I used the top of my trailer to help hold the rod while tightening the set bolts...all the while holding another rod in the cavity for safety. From there, you will want to readjust your drums on the cables to get an equal amount of tension on each cable. One cable will likely be a lot tighter while the other relaxed upon rasing the ramp. With the door up and closed, loosen the drum set bolts on the LOOSE cable drum and spin it to get a tighter cable and lock the bolts back into place. Raise and lower the door a time or two and go back into the trailer with the door closed and readjust the drum that has cable slack until they are fairly equal.
That was it and other than the appeals for safety around the entire process, it was easy to do.
Unless you are used to working around stuff like this, I think having a garage door company wind the springs and adjust the drums would be money well spent to avoid any potential injuries. I doubt it would cost much because that part goes pretty quickly and they would have the experience to do it in about 15 minutes or so.




by:

Yes, I know it is recommended for personnel whom have utilized a torsion spring before, but I am definitely on the stubborn side. Before I could contact my local garage door guy, I pulled this out of the box to see if I needed to make a modification. So, I shortened the bar. I then noticed that the old one had to come down. Then I happened to notice that the placement of the plate almost lined up to the old one. Two minutes later, I was too far in the installation to not finish this job myself. Total time it took me was 1hr45min. 15 of those minutes were spent unwinding the cables because I didn't read the directions to put it on with the ramp down. Other than that, it was a breeze. Customer service was also the most amazing experience ever. I called to make sure I was ordering the right part from Pace and they informed me that my trailer was to old and to go to a recommended dealer 30 minutes away. etrailers crack staff told me to go out and measure my trailer twice, to make sure it would fit. Voila, 2 minutes later, i knew I had the right part.




by:

The mounting plates are adjustable so there adjusted to fit my Pace 16' trailer perfectly. I had to install the cable pulleys backwards from what the directions called for and with the set screws facing the outside walls as well.

I installed mine with the door closed not open against what the directions say as well. When you put some tension of the springs with the door closed you must stretch out the springs some before using the set screws. If the springs are not stretched out some the door will barely open and stop because the springs will have to room to turn and expand.

The real trick is getting the cables wound up even and tightly. I needed my parts ASAP so I paid next day air which was very cheap for such a large part.




by:

I reinforced the rear ramp of my aluminum trailer and needed a bigger torsion spring set to compensate for the extra weight. The information I found on etrailer.com made it easy to choose exactly what I wanted.
The best part was the shipping speed. I ordered it Monday and received it by Wednesday.
Not only was it cheaper than the local trailer supply it was quicker.
Easy to install and works like a charm.




by:

I've order many items from this company. First website is perfect very quick,also every item u may need with a item your ordering is shown (such trailer wiring connectors and so on) shipping is fast as we can ever ask. And all information for products is available including wiring diagrams and ext. Hands down great company.Just keep it up!!




by:

Bought this spring assembly for my 7x14 enclosed trailer ramp door. Delivery was quick and it fit perfect. Its been a full year and still working well. If i remember correctly a friend and I installed it in about an hour.




by:

Exactly what it says it is. Looks like a nice piece. Easy installation. Best deal on the internet. I searched for probably hours trying to find a better deal and you wont. They didnt have it in stock but ended up shipping it straight to me and I had it before they thought I would. Great Service. Very easy to work with. Will always come here and look for future trailer parts.




by:

Everything fit perfectly and worked as intended




by:

Best service ever, I was packing for an a tv trip and the spring broke as I closed the rampthree nights before leaving. Trailer saved my vacation big time by shipping quick and the video really helped a lot. Thanks etrailer




by:

Item fit perfect and has function flawlessly after I installed it !! Thank you Etrailer !!


Comments
Excellent no issues
Marty B - 07/07/2017


by:

Product came in a timely matter through UPS. Installed it with no problem at all but you MUST read the instructions first so that you know what you're doing. Turned 38 quarter turns and then a few more (4) after that. Not sure if I should do a few more turns because the ramp door still takes two hands to close.


Comments
Thanks for your review and your business, Jim. We recommend contacting a local garage door company to install this system.
-- Etrailer Expert Laura E - 01/18/2017


by:

The gate spring worked great and still is after a year. before I was lifting this gate
by hand. This gate is several hundred pounds. With this system I can lift it with
one hand with ease,well worth the money.




by:

Haven't installed it yet, but it appears to be a well made assembly. It will be installed in the next week or so. Delivery was prompt, and package arrived in very good condition. My ramp is quite heavy and the trailer somewhat narrow, so this spring assembly should fill the bill nicely.



25
256
Show More Reviews

See what our Experts say about this M-3 and Associates Trailer Ramp Springs



< Previous



Do you have a question about this Trailer Ramp Spring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer ramp spring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.