bing tracking image
  1. Trailer Ramp Springs
  2. TRC
  3. Single Ramp Spring
  4. 79 Inch Wide Doors
  5. Conventional
  6. 79 Inch Wide Spring
Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 120-lb Capacity

Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 120-lb Capacity

Item # 362SA7218
Retail:$156.80
Our Price: $137.48
You Save: $19.32
Trailer Ramp Springs
This item qualifies for Free Shipping
Shipping Weight: 23 lbs
Quantity: 
In Stock
362SA7218 - 79 Inch Wide Doors TRC Trailer Ramp Springs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 79" wide trailer doors. Great Prices for the best trailer ramp springs from TRC. Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 120-lb Capacity part number 362SA7218 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

TRC Trailer Ramp Springs - 362SA7218

  • Single Ramp Spring
  • 79 Inch Wide Doors
  • Conventional
  • 79 Inch Wide Spring
  • 120 lb Capacity
  • TRC
  • Steel
  • 4-7/8 Inch Tall Spring

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 79" wide trailer doors.


Features:

  • Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
    • Helps take on the weight of your trailer door so you don't have to
  • Spring reduces wear and helps prevent damage to door hinges
  • System can be modified to fit your specific application
    • Slide the bracket and cable drum down and cut the shaft to a shorter length
  • Sturdy steel construction
  • Made in the USA


Specs:

  • Application: 38" to 79" wide trailer door
  • Dimensions: 79" wide x 4-7/8" tall x 7-1/2" deep
  • Spring capacity: 120 lbs
  • Cable length: 150"


Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.

TRCSA 7 218 TRC Enclosed Trailer Ramp Conventional Spring - Single 218 - 77" Wide - Qty 1





Video of Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 120-lb Capacity

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA7218

Today we're going to take a look at the conventional single spring ramp door spring for the seven foot wide enclosed trailers. This has 120 pound weight capacity. Now you can replace your old trailer door spring with this nice heavy duty conventional ramp door spring. Application for this is seven foot wide trailers. Now this ramp door spring lets you easily lift and lower the door on your enclosed trailer without the risk of injury because it'll help take on the weight of the trailer doors so that you don't have to. This spring will help reduce wear, helps prevent damage to the door hinges.

And if you notice on each end they have the cable drums that the cable goes around, those cable drums are marked, they have a right hand on this side and a left hand marking on this side. So when you do go to install this, the right hand drum should be on the curb side of the trailer and the left hand side should be on the road side or driver's side.This is a nice sturdy steel construction. It is made in the USA. It does include everything shown here, includes the galvanized cable with the quarter inch nylon eyes on each end, the brackets, and a nice set of detailed instructions. Now just a warning on the installation, it is recommended that only individuals who have experienced winding these torsion springs should install this product cause winding.

These Springs can be very dangerous if you're not familiar with the procedure, so if you've not worked with a torsion spring system before, we do recommend contacting your local garage door company to install this system. Also, I did want to mention that if you do have a smaller width trailer that's less than seven foot with a heavy door and you'd like to use this higher capacity spring for that application, this can be modified by cutting the shaft to a shorter length and then adjusting the bracket and the cable drum on the end to the smaller width that's needed.You can see there's two screws here that hold the cable drum in place. If they are loosened, this whole bracket and the drum will slide to whatever with you would need and then just cut off the remainder. So it can be adjusted. I'm just going to go ahead and put it back out to seven foot wide trailers because we're going to give you some dimensions here.

So basically when this is mounted in this position for seven foot trailers, overall width on it is going to be 77 inches wide. The depth on it, which will be measured from where this mounts to your trailer to the back here is going to be seven and a half inches deep. And the overall height on it is about 4 7/8 inches tall. And the spring capacity we did mention is 120 pounds. But that should do it for the review on the conventional single spring ramp door spring for the seven foot wide enclosed trailers..

Customer Satisfaction Score:


Customer Reviews

Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 120-lb Capacity - 362SA7218

Average Customer Rating:  5.0 out of 5 stars   (11 Customer Reviews)

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 79" wide trailer doors.

by:

Husband replaced the door spring with no issues. This product worked perfectly




by:

I ordered some ramp springs I installed them myself about a year ago and they are just as strong as the day I installed them!




by:

Works perfectly highly recommend it.




by:

This spring works great easy to install well worth the money




by:

Everyone was as expected. Received sooner than expected. Easy install.




by:

Great




by:




by:




by:




by:




by:



11
11

See what our Experts say about this TRC Trailer Ramp Springs

  • Can Mounting Bracket on Conventional Ramp Door Spring Be Adjusted for Different Door Widths
    Yes, that's exactly how the mounting bracket width is adjusted for the Conventional Ramp Door Spring # 362SA7218. This ramp door spring will work with door widths in the 38" to 79" range ad you'll just cut the shaft/rod to accommodate the smaller door widths. Attached is a review video for you to check out. Please note if you haven't installed something that uses a torsion spring before we highly recommend contacting a local garage door company to come do the installation for you.
    view full answer...
  • Conventional Ramp Door Spring for 95 Pound Ramp Door
    You want the Conventional Ramp Door Spring # 362SA7218 for your trailer with a 95 lb door. It is always best to go on the high side for the capacity so you know the spring can handle the weight of the door. With a 120 lb capacity you won't have the door shutting or lifting on its own, and it won't be difficult to operate. This would only become a potential problem if the capacity of the spring was significantly higher than the door weight.
    view full answer...

Do you have a question about this Trailer Ramp Spring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer ramp spring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924