#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

See what our Experts say about this TruRyde Trailer Spindles

• Are #84 Spindles Threaded into the Axle?
  No, they're welded. You assumed correctly. The spindles listed below that I referenced in your previous question all have to be welded on. There are no thread on spindles. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter item # TRU24FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter item # TRU84FR Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide item # TRU47FR
  view full answer...
• Recommended Replacement Disc Brakes For A 2008 Trail-Rite With UFP DB-42 Brakes
  From the pictures you provided, you have a UFP DB-42 disc brake set up on your 2008 Trail-Rite. This isn't something we carry, but it looks like these systems use the # L68149 inner bearing and the # L44649 bearing, so you do have a common spindle for a 3,500 pound axle. With that said, we do have the Kodiak Disc Brake Kit # K2HR35DS that looks like it would be a perfect replacement. This is rated for 3,500 pound axles and will use these same bearings, though not included so you will need...
  view full answer...
  
• Mounting Bolt Pattern of 10 Inch Electric Drum Brake Assemblies
  The Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35 has a mounting pattern that is typical for 3,500 lb axles. The center on center horizontal measurement of the mounting bolts are 2-7/8 inches and diagonal center on center of 4 inches. You can see this with the mounting flange # 4-35. I can't confirm the fit of the hubs on your trailer without knowing if the spindles on the axles are the standard length or not. The standard spindle length leading...
  view full answer...
  
• Longest Replacement Trailer Spindle with 6 Lug Hub
  The longest spindle we have is the part # TRU84FR which is 11-1/4 inches long overall. So for 6 lug hubs that would fit this you'd want the part # 84656UC3-EZ for a hub drum or part # AKIHUB-655-35-EZ-K for an idler hub.
  view full answer...
• Replacement Hub for Trailer With Timken 158123 Inner and 09067 Outer Bearing
  I looked through our selection of hubs and hub/drums, and couldn't find anything compatible with the bearings you mentioned. This leaves you with two alternatives. Number one would be to cut off your existing spindles and install spindles like # TRU84FR that would be compatible with a standard hub like # 84545BX. The hub has the same number of lugs and bolt circle as your existing hubs, so you could use the same wheels. Removing the old spindles and welding the new ones into place is best...
  view full answer...
  
• What Size of Spindle is Needed for a 3,500-Lb Axle
  I have three spindles that are for a 3,500-lb axle and have the bearing dimensions you have listed. The only difference is the dimension for the grease seal is 1.75 inches, not the 1.795 inches that you have mentioned. Maybe you typed in the seal diameter wrong. The hub number you have mentioned is just a casting number, not a part number. The three spindles I have for a 3,500-lb axle are as follows. #84 Spindle - 1-3/4" Diameter (8-1/4" OAL) # TRU64FR #84 E-Z Lube Spindle w/ Brake Flange...
  view full answer...
• How to Determine Which Replacement Hubs Will Fit Spindle
  There are a few different ways to make sure that you are getting the correct hub to match your spindle like the wheel bolt pattern, bearings, and weight capacity. You can either use a Digital Caliper # PTW80157 to measure the different sections of your spindle (see attached picture), or you can simply remove your current hub and locate the bearing, race, and seal numbers (on same attached picture). Once you know what the measurements or numbers are you can either filter through our selection...
  view full answer...
  
• Replacement Spindle and Hub for my Lippert 3500# Axle
  The #84 Spindle for 3,500-lb Trailer Axles part # TRU84FR and the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-550-35-K for a 5 on 5" wheel bolt pattern or the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K for a 5 on 4.5" bolt pattern will have you set up and ready to go.
  view full answer...
• Compatibility of Dexter 3500-lb 5-on-5 Trailer Hub # 84550BX with TRU84FR Spindle
  The hub you referenced, Dexter 3500-lb 5-on-5 Trailer Hub # 84550BX, which comes with inner/outer bearings # L68149 and # L44649, is indeed a correct fit for the Number 84 Spindle, part # TRU84FR .
  view full answer...
• Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
  I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle. Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using...
  view full answer...
• Replacement Axle for a 1991 Lowe Boat Trailer
  None of the spindles we carry have the same measurements as what you have. The only real recommendation I could make would be to replace the axle since by the time you buy the spindles, have them professionally installed and get the correct hubs you're almost at the same price as just getting a new axle. In order to recommend an axle assembly for you, I'll need some more information. First, you will need to ensure that the existing wheels and tires you are using are rated for the extra...
  view full answer...
  
• What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
  The Trailer Hub Assembly # 84550BX that you referenced will use # L68149 as the inner bearing and # L44649 as the outer bearing. These are the inner and outer bearings used by a # 84 spindle. We offer the following spindles: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR [R2061-284] #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter (9" OAL) # TRU74FR [R20384EZ] #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4"...
  view full answer...
• Replacement Hub For Boat Trailer Using Bearings L68149 And L44649
  The closest we have is Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. This uses inner bearing L68149 (1.378" inner diameter) and outer bearing L44649 (1.063" inner diameter) that you currently have. It also has the outer race L44610 that you have. There is not a hub available that has the inner race L68110 that you have which measures 2.327". This kit includes inner race L68111 which measures 2.361". You can stick with your current...
  view full answer...
• Replacement Hub and Spindle for TDE 11033 Hub
  The Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles like the # AKIHUB-545-35-K. Then for a spindle the part # TRU84FR that you referenced would be what you need.
  view full answer...
• Replacement Spindles For 3,500LB Trailer Axle With Tapered Spindle with 1-1/16" & 1-3/8" Bearing ID
  We do have the following replacement spindles that will fit on your axle. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter # TRU24FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU84FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR
  view full answer...
• Spindle Replacement Recommendation For Donahue Horse Trailer
  In order to make sure you get the right components for your Donahue Horse Trailer, we will need some more information. If you are wanting to replace the spindle, the first thing you will need to know is the weight capacity and dimensions of the axle you plan on using the spindle on. Please keep in mind that installing the spindle require welding it to the axle by a certified welder. They use special jigs so that it is concentric and square on the axle or it can cause problems with uneven...
  view full answer...
• Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub
  When installing a hub like the # AKIHUB-545-35-K on the # TRU84FR the hub is going to stop where the grease seal sits. If you look at the attached picture below, you will see the measurement marked F which is 6-1/2". This would be the stub length, which is the same as the distance from the end to the back of the hub. If you are talking about the other end, the distance would be the overall spindle length of 11-1/4" minus F, which would be 4-3/4".
  view full answer...
  
• Hub and Spindle Recommendation for the Kenda 215/60-8 Bias Tire with 8 Galvanized Wheel # AM3H325
  For a hub to match the bolt pattern of the # AM3H325 that you referenced you will want an idler hub that has a matching bolt pattern, 5 on 4-1/2 inches. For a hub I would recommend the part # 84545UC1-EZ, and then for a spindle part # TRU84FR.
  view full answer...
• Hub and Drum Assemblies and Spindles for Dexter Electric Trailer Brakes 23-112
  The brake assembly # 23-112 is rated for 6,000 pound axles, not 3,500 pound axles. For a 3,500 pound axle you will need to look at 10x2-1/4 inch brakes such as # 23-26 for the left side and # 23-27 for the right side. These mount to a 4-bolt flange, such as # 4-34 for 1-3/4 inch round axles, or # 4-35 for 2-3/8 inch round axles. Brake mounting flanges need to be installed by a qualified professional with experience welding on brake flanges because it is a precision job requiring special...
  view full answer...
• Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
  You should still be able to use your spindle without having to replace anything, especially because this is not in the seating areas for the bearings. Regardless, I recommend cleaning off the spindle with emery cloth to try to remove as much of the rust as possible. You'll want to take care to make sure that there is no pitting on the spindle that might damage the new bearings, which would be the only case that I recommend replacing the spindles. If you do end up needing to replace your...
  view full answer...
• Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
  First, it does sound like, based on the measurement and information you have provided, that race # L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing # L68149 which has an inner diameter of 1.378 inches and fits a number 84 spindle. On these spindles the diameter where the seal goes is 1.73 inches such as # TRU84FR. The seal should be a tight fit. I once had a heck of a time pulling a hub off of a trailer that was held on by the seal only!...
  view full answer...
• How to Grease Trailer Bearings and Spindle without EZ Lube Axle and Spindle
  If you don't have an EZ-Lube spindle on your axle then you'll need to remove the hub, remove and repack the bearings, races and seals manually. Standard trailer bearings should be re-packed and greased every 10,000 to 12,000 miles in normal towing conditions; if you're routinely towing at maximum load or live in an extremely warm and dry area it might be less than that. This will be the only way to properly grease the bearings and spindle to perform this routine maintenance. If you don't...
  view full answer...
• Spindles for a Trailer Hub Assembly for 3500 lb Axle
  The following spindles will fit hub 84545BX 1. Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide (8-1/4" OAL) # TRU47FR 2. #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4" OAL) # TRU64FR 3. #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR
  view full answer...
• Replacing a Hub on a #84 Spindle
  Being off as little as it is, the hub may just be getting caught on something. Remove the hub from the spindle to make sure there is nothing that could be catching the inner bearing. Next, install just the inner bearing # L68149 making sure it gets all the way to the correct location on the spindle, which should measure 1.378 inches. Once that is in place, slide the hub on making sure it seats completely on the rear bearing and holding it in place. Then slide the outer bearing # L44649...
  view full answer...

Do you have a question about this Trailer Spindle?