Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
10-1/8" Long, swan-shaped equalizer connects slipper springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Fits springs with 9/16" diameter eye.
Features:
Specs:
Part Number | A | B | C | D | E | F |
---|---|---|---|---|---|---|
13-4 | 4-5/8" | 5-1/2" | 5" | 9/16" | 5/16" | 7/8" |
Related part numbers and quantities required:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the swan-shaped equalizer for two-inch wide slipper springs. This is going to connect slipper springs on dual or triple axle trailers. One end of the slipper spring attaches with a bolt and shackle strap. That would go on this end right here. That would go through the eye of the spring. The hardware to get that installed is not included, so it needs to be provided separately.
The other end, the arched end of the other spring, would rest on a keeper bolt at this location. Again, that hardware's sold separately also. Then the equalizer will be suspended from the center hanger, and that hardware that goes with the center hanger, as well as the center hanger, that's all sold separately. If you need any of those supplies, you can find that stuff right here at etrailer.com. This unit's designed to transfer the load and sudden impacts from one axle to another by permitting movement between the axles. It's really going to help distribute weight evenly, and it's going to result in a smooth ride for the trailer.
It's constructed of steel construction with a black finish. It's going to fit two-inch wide slipper leaf springs. The center bolt hold diameter, that's this hole right here, that's going to measure 7/8 of an inch. The side bolt hold diameter for mounting the spring, that's this one right here, 9/16 of an inch. The bolt hold diameter for the keeper bolt, right here, that's 5/16 of an inch. A few measurements to go over with real quick.
We're going to take a measurement from the center of the center hole to the center of this hole over here. If we do that, that's going to give us measurement . Let me make sure this straight. It's going to give us a measurement of around 4 5/8 of an inch. If we do a measurement from the center of the center hole to the hole down here, that's going to give us measurement of about 5 inches.
That's going to do it for today's look at the swan-shaped equalizer for two-inch wide slipper springs.
Average Customer Rating: 4.7 out of 5 stars (24 Customer Reviews)
10-1/8" Long, swan-shaped equalizer connects slipper springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Fits springs with 9/16" diameter eye.Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John
I think that the one pictured is nice and shinny black
And the one I received is rusty
Excellent product did what it was designed to do. Thank You for your quick service
David
5/24/2023
Still working good no problems
The equalizer bar was a perfect fit, replaced the rusted out original, exactly. E trailer also had the best price and cheapest shipping...which showed up 2 days faster than expected!!
Good quality springs and bolts, revived the suspension on the trailer. Quck turn around and delivery.
great product and great customer service as always with etrailer
Fantastic, quick service. Products weren't available anywhere else I could find but here. Highly recommend.
Product was an exact fit and great quality
Everything fit perfectly
Exactly what we needed and really fast too!
very well made ---they are the same as the old ones on a 1974 trailer--hard to find thanks
Good product
WORKING AS DESIGNED
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
12/7/2023
Oh no! I will have our Customer Service team reach out to you.