bing tracking image
  1. Trailer Suspension Parts
  2. Dexter
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
Dexter

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Part Number: AP216-H238
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$264.55
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately. Great Prices for the best trailer suspension parts from Dexter. Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers part number AP216-H238 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (10)
  • Q & A (0)
  • Photos

Dexter Trailer Suspension Parts - AP216-H238

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • Tandem Axle
  • Dexter

Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 4 leaf spring assemblies (sold separately) to your trailer frame
  • Includes:
    • (2) 5" Tall front hangers
    • (2) 4-1/2" Tall center hangers
    • (2) 6-3/8" Tall rear hangers
    • (2) 13-1/8" Long straight equalizers
      • 7/8" Diameter center hole for mounting to hanger
      • 9/16" Diameter side hole for mounting to spring
    • (4) 3-1/4" Long x 5/16" diameter spring keeper bolts
    • (4) 5/16" Diameter locknuts
    • (4) 3-1/2" Long x 9/16" diameter shackle bolts
    • (4) 9/16" Diameter locknuts
    • (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts
    • (2) 7/8" Diameter locknuts for spring keeper bolts
  • Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles
  • Does not include components for mounting axle to springs


K71-366-00 and H238 Tandem Axle Hanger Kit - 2" Slipper Springs - 3,500 lbs to 8,000 lbs





Customer Satisfaction Score:


Customer Reviews

Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers - AP216-H238

Average Customer Rating:  4.8 out of 5 stars   (10 Customer Reviews)

Leaf-spring mounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.

by:

We purchased this kit to rebuild an older trailer with worn parts. We received the kit promptly, however, the package was compromised and bolts were missing when it arrived. A quick call and the problem was resolved immediately. Two days later all new bolts appeared on our doorstep. Great company that cares about taking care of its customers. We truly appreciated that and will surely order again very soon as we have several trailers in our fleet.



by:

It is hard to find such great quality and great service ANYWHERE these days, HOWEVER etrailer still has what it takes. The people always make a difference when you need help. A+
They have great Tech support online chat, email, by phone and even great tech articles.



by:

i used every thing but rear hanger all is good.my brother is going to get parts for his trailer



by:

Good quality, nice welds, everything was a exact fit for my 1999 Superline 6CAM16 restoration.



by:

Easy install, parts were just as described. Excellent customer service!!!



by:



by:

Quality product and fast shipping



by:



by:



by:


10
10

See what our Experts say about this Dexter Trailer Suspension Parts

  • Hanger, U-Bolt, and Slipper Spring Kit for 8k Trailer Axles
    If you use the Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # HAP-105-205-01 that you referenced you'd end up with a height of 4-7/8 inches between the axle center and the frame of the trailer and 8 inches between the tires for most tire sizes. How that relates to your fender to tire clearance really depends on the location you install the fenders. For an 8k slipper spring that is 2 inches wide we have the etrailer # e37SR that would work really well. The hanger kit part...
    view full answer...
  • Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
    The spacing is going to depend on the size of your tires, so let's start with that. For a 16 inch wheel/tire combo with an 8 on 6-1/2" bolt pattern the best option is a ST235/80R16 size tire with a load range of G to handle the capacity of your trailer. . A ST235/80R16 tire will measure nearly 31 inches in diameter so if your axles centers are spaced 36 inches apart you will have plenty of room. For the slipper springs you were right on with the 5-Leaf Slipper Spring w/ Hook End for 7,000-lb...
    view full answer...
    Image 1 for
  • Should Bolts be Tightened Down Completely on Leaf Spring Hangers
    I definitely recommend pulling the bolts in until the head is flush with the hangers on your trailer's suspension. It's possible everything will work okay as they are now, but to be safe all the bolts should be tightened down completely. Even when tightened down, there will be some necessary movement there, but you will still want it as secure as possible. I have attached a leaf spring installation video that you may also find helpful
    view full answer...
    Image 1 for
  • How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
    There isn't a specific distance the hangers have to be for hanger kit # AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers. To determine where the center between the 2 axles should be, and then to work and add the hangers from there, you can follow the formula in the picture I have included. Once you know where the center between the 2 axles should be it would just be a matter...
    view full answer...
    Image 1 for
  • Will Redline Tandem-Axle Trailer Hanger Kit Work With 7-Leaf Slipper Springs
    The reference to 4 leaf springs is the quantity of leaf springs the Tandem-Axle Trailer Hanger Kit, part # AP216-H238. Since it is for a tandem set up you would need to use 4 different leaf springs that are designed for axles up to 8,000 lbs capacity.
    view full answer...
  • Hanger Kit Recommendation for use with 29-1/2 Slipper Springs with 7000-lbs Tandem Axles
    Yes. You can use the Tandem-Axle Trailer Hanger Kit # AP216-H238 with your 29.5" Slipper Springs # e39SR; you'll want to make sure that you space your axles 35-1/8" apart (center on center) when assembling your trailer to correctly fit the # SP-161275 springs and the # AP216-H238 hanger kit. The # AP216-H238 kit comes with everything you need to mount your leaf springs including the hangers, equalizers and mounting hardware. You'll want to make sure that the hangers are installed by a...
    view full answer...
  • Does a Slipper Spring Suspension Use a Bushing on the Slipper End
    There is not a bushing on the hangers used on slipper spring trailers. Smaller single axle trailers will have a bolt that runs through the hanger, while some larger and tandem axle trailers will have a welded tube that the spring sits on, but there's no need to use a bushing. If you need to replace your hangers you can use something like the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers # AP216-H238 for a tandem axle trailer or the Single-Axle Trailer...
    view full answer...
  • Hanger Spacing for Tandem-Axle Trailer Hanger Kit AP216-H238 and 29-1/2 Inch Slipper Springs
    When using trailer suspension hanger kit # AP216-H238 with spring E5115, # e39SR, the distance from the center of the front hanger to the center of the middle hanger AND the distance from the center of the middle hanger to the center of the rear hanger are both 31 inches. Measurements for hanger kits are approximate and it is recommended to mock up the suspension to get the proper spacing prior to permanent installation.
    view full answer...
  • Recommended 2 Slipper Spring Hanger Kit For Tandem Axle Trailer W/ 5200-7000lb Axles
    Slipper springs are pretty common on tandem axle trailers with heavy duty axles like yours, and I recommend sticking with them as there are limited double eye springs for axles 5200lb+ like yours. The Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers # AP216-H238 you were looking at are a great choice as it includes 5" tall front hangers, 6-3/8" tall rear hangers, and 13-1/8" long equalizers that attach to 4-1/2" tall center hangers so it will be very close...
    view full answer...
  • Does a Tandem Axle Trailer Need Equalizers
    If your trailer has torsion axles, no worries but it it's a leaf spring suspension you really should have equalizers. Without the equalizer, the trailer will have a rougher ride and the weight won't be balanced across both axles when going over anything other than a flat surface. So potentially if you have 7000 lb trailer going over a bump with 2 , 3500 lb axles. When one axle is temporarily in the "air " the other axle will take on all the weight. That is why you don't see it too often....
    view full answer...
  • Redline Triple-Axle Slipper Springs Equalizer Spacing
    In order to find the correct spacing for your hangers item # AP316, equalizer kit item # H302, and your 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long item # e74SR you will need to mock up all the parts to determine the proper locations prior to permanently installing everything. The equalizer you referenced item # AP316 are 10-1/8" and I have attached a picture to show the bolt spaces. When using 2" slipper springs on your triple axle trailer the distance between...
    view full answer...
    Image 1 for
  • Trailer Lift Kit For Stock Trailer
    The Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # AP216-H238 you referenced is a good option, alternatively, the Torflex Lift Kit # K71-724-02 is another option that is compatible with #11 Torflex axles with 4,100-6,000-lb capacity; And will work as long as your axle uses side mounted brackets, however torsion axles that mount from the top cannot use lift kits. This kit will work as long as your axles do not use 3" tall brackets.
    view full answer...
  • Axle Spacing To Use 29-1/2 inch Long Leaf Springs with Slipper Axle Tandem Hanger Kit # AP216-H238
    With 29-1/2 inch leaf springs like the # e46SR that you referenced the axle spacing you'll want to use with the hanger kit part # AP216-H238 would be 35-1/8 inches. You cannot use the over under kits we offer with slipper springs.
    view full answer...
  • Hanger Spacings for Trailer Suspension Hanger Kit AP216-H238 with 26-5/8 inch Slipper Spring
    When you use the Tandem-Axle Trailer Hanger Kit # AP216-H238 with the 4 Leaf Slipper springs part # SP-230275 the distance between the front hanger and the center hanger will be 30-1/2 inches, the distance from the center hanger to the rear hanger will also be 30-1/2 inches. This will put the axle centers at 36 inches apart.
    view full answer...
  • Slipper Spring and Tandem Axle Hanger Kit Recommendation for a 14k Trailer
    Both slipper springs and double eye springs will work just as well as the other as long as they are rated for the weight of the trailer. Typically slipper springs are seen more on the heavier capacity trailers. For an 8k axle rated spring you really only have the option of slipper springs. You would want the # e46SR like you referenced. For a tandem axle hanger kit for use with this spring you would then want the part # AP216-H238.
    view full answer...
  • Tandem Slipper Spring Hanger Dimensions
    When you use the Tandem-Axle Trailer Hanger Kit # AP216-H238 with the 4 Leaf Slipper springs part # SP-230275 the distance between the front hanger and the center hanger will be 30-1/2 inches, the distance from the center hanger to the rear hanger will also be 30-1/2 inches. This will put the axle centers at 36 inches apart.
    view full answer...
  • Jack Placement on Tandem-Axle Trailer Changing Flat Tire
    If you are asking can you place the jack directly under the equalizer of the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs, # AP216-H238, I recommend against doing so. I suggest for purpose of lifting the trailer for wheel removal, you go directly to the axle for jack placement or at a designated lift location on the trailer identified by the OEM.
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Eric H
Updated by:
Eric H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.