Arrives before Christmas 
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.
Features:
Specs:
Note: This does not work with MORryde CRE3000 equalizers.
Raise Your Trailer's Ride Height
Newer trucks are being built to ride higher. This means that your trailer may have to be raised to match. If the two aren't the same height at the connection point, the nose of your trailer or RV is going to ride too high. This will put too much weight on the rear of your trailer, which can result in poor handling and may eventually cause damage.
The Correct Track helps to solve this problem by lifting your trailer or RV 1-1/4" or 2-1/4", which provides a level towing setup for taller trucks. This added lift is also great for 5th-wheel trailers that might have trouble clearing tall pickup bed side rails.
Correct Misaligned Axles and Suspension
If the tires on your RV or trailer are wearing down quickly and prematurely, there's a good chance your axles are out of alignment. Driving with misaligned axles for long periods of time will shorten the life of your tires, reduce your gas mileage, and can make it difficult to steer your rig. Misaligned axles are often caused by an imbalance of weight, which can result from simply using the slide-out on your 5th wheel or having heavy appliances positioned on one side.
The Correct Track integrates into your trailer's suspension system and shifts the axles back into proper alignment. This kit allows you to adjust the axle alignment by 1/4" increments for a properly aligned suspension. It will correct your RV or trailer's alignment whether the axles need to be moved forward or backward.
Average Customer Rating: 4.4 out of 5 stars (32 Customer Reviews)
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.Built heavy duty ,my axles are in line for once,opted to lift my rig at 2 1/4 " it sits level with my 17 dodge 3500. I like this kit better than the lippert kit. This kit is like it was made for my suspension.
The kit came exactly as described and works as indicated. The shipping was stunningly fast but that might have just been my location. Either way everything was delivered quickly and as described.
I am not sure if I did not read the part about it not working with my Dexter equalizers but I had to modify the kit considerably to get it to fit with my system. The equalizers rubbed on the plates and the plate with the holes extended to far down and rubbed on the rubber of the equalizer. I made it work for me. So far so good.
This will not be easy to install. The product is designed for use on 2" ID spring supports, however our supports are 1-7/8" ID. Hence bolt lengths and etc. will be a PITA to correctly install. Not happy to see this issue, however it is better to notice before beginning the project. This will end up being a 2-day minimum project with all the time spent going to the hardware store. However, upon completion it should work to correct our trailering concerns.
Kaitlyn has been great with helping me with my orders for my trailer parts.
We have talked many times about getting all of the right parts that I will need. She is very helpful and I appreciate e-trailer for having great people working there.
I needed to raise the height of my Keystone Laredo because my new truck was too high for a level pull. And it also allowed me to correct a tire wear that I had for years, due to an alignment issue.
Looks great and hopefully will work as advertised. Will be installing in a couple of weeks.
It CAN work with the Moryde CRE3000 suspension! For obvious reasons etrailer cannot and will not advise on making any modifications to this product and in doing so you are likely forfeiting any chance at returns or exchanges. I spent plenty of time researching best I could before pulling the trigger on this because I didn’t want to replace my perfectly good Moryde CRE3000 stabilizer unless I absolutely had to or the modifications would be too much work than it was worth. I’ll include as much information as I can.
Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!
When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.
I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)
I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.
I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.
Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.
ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!
The Triple Axle Kit costs less and includes three boxes instead of two, as with the tandem axle kit. However, the instructions could be clearer. I’d recommend choosing a triple axle set even if you’re working on a tandem axle, so you can adjust each hanger individually and maintain the correct spring angles. Otherwise, if you only install it on the center and rear hangers, you’ll need to adjust both the center and rear if you need to tweak the front right wheel, which can be tricky to get right. Alternatively, buying two single-axle kits could save you around $150 and simplify the setup.
I have not installed the kit yet. The ordering process was easy and had plenty of information to make sure it was what I needed. The delivery date estimated during the order process was not accurate. The delivery date during the order process stated it to be the end of April. A few days after the date had passed I received a notification saying the order was being gathered and was expected to ship May 1. I received the order on May 6. This is not a huge issue, but with porch pirates these days, I make plans based on the stated date when ordering.
*** That being said, I have always had great great experience with eTrailer and is my go to for specialty and towing items. I am grateful for the detailed answers, videos and feedback they have for their customers. ***
Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to
It raised my camper to better match the height of my truck. Also, I was able to align the axles for more even tire wear.
Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied
I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.
This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!
Installing this kit on my travel trailer corrected my dual axle alignment problem which was wearing the inside of the left rear tire. It was easy to install, easy to understand, and very adjustable.
Price was good and it was in stock.
I was confused why it took four days to ship when it was pulled the second day?
I ended up not being able to use it before I left on a six-week excursion.
Looking forward to getting back home and installing the product.
Product is great. I just wish the instructions addressed tandem and triple axle applications. And some actual pictures of installation would be even better.
I can’t review the product since installation is not scheduled until Friday. I have ordered fro eTrailer because I like their service, customer service and quick ship and deliver.
Used this to lift my fifth wheel 2 inches to reduce the nose height condition that is common with newer trucks. Not as easy as changing a tire though.
Do not purchase. These did not work at all and I had to remove them.
Pretty simple to do with great benefits down the road.
The product looks great and seems very well made. I have not been able to install on my own and I have tried with two different shops to install this system on my RV and they will not.
I have not had a chance to install them yet, but they seem to be exactly what I need.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.