1" Diameter spring-retainer bolt attaches slipper spring to front hanger or equalizer on trailers with 10,000-lb, 12,000-lb or 15,000-lb Dexter axles. Locknut included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to take a look at the 5 1/2-inch long spring eye bolt and locknut for the heavy duty Dexter axles. This is a one-inch diameter spring retainer bolt that'll attach the slipper springs to your front hanger or equalizer. The locknut is included, and this is designed for use on 10,000 pound, 12,000 pound, and 15,000 pound heavy duty Dexter axles.A few specs, starting with the bolt. It's a Grade 5 bolt. Again, the diameter is one inch. It does have eight threads per inch.
A few measurements on it. The total length, which is measured from under the very end, inaudible 00:00:33 5 1/2-inches. The threaded portion is 2 1/2-inches. Now, the locknut has an inside diameter of one inch, so it fits on the one-inch bolt. Again, threads per inch is eight threads per inch.
The head size or socket size is right at 1 1/2-inches.Now, the last thing I do when I show you when you go to install this, what you want to be aware of, if you notice on this locknut, on this side there's three indentations and on the other side there's not. The three indentations lets you know that that's the side that has the locking feature on it. When you go to install this onto the bolt, you want to make sure those three indentations are facing out. That you can see them when you install it, so that way it'll turn on and once you get it far enough, it'll stop and that'll lock it into place. If you try it the other way, you'll think you'll have the wrong nut, because it won't allow you to start it because of that locking feature.
You always want to make sure that's facing out, that you can see it when you install it.That should do it for the review on the 5 1/2-inch long spring eye bolt and locknut for heavy duty Dexter axles.
Average Customer Rating: 4.6 out of 5 stars (20 Customer Reviews)
1" Diameter spring-retainer bolt attaches slipper spring to front hanger or equalizer on trailers with 10,000-lb, 12,000-lb or 15,000-lb Dexter axles. Locknut included.Usually you are completely on top of your game. This time my company is slightly disappointed in the timeframe of events. We stock checked all parts prior to ordering but then found out after the order was placed some were not in stock. Nobody reached out to let us know the parts were out of stock or asked if we would like to have the rest of the order shipped while waiting for the remaining out of stock items. Once we called we were able to get things moving however the shipment still was not expedited and took an additional extra five days.
perfect
Very good
as advertised
prefect fit
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.