bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Standard Equalizer
  4. Boat Trailer
  5. Camper
  6. Car Hauler
  7. Snowmobile Trailer
  8. Utility Trailer
Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
Redline

Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Part Number: AP316
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$204.75
Retail:$241.14
You Save: $36.39
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Kit includes 13-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H302 hangers for a complete triple-axle kit. Great Prices for the best trailer suspension parts from Redline. Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers part number AP316 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Trailer Suspension Parts - AP316

  • Standard Equalizer
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • 13-1/8 Inch Long
  • Triple Axle
  • Redline

Kit includes 13-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H302 hangers for a complete triple-axle kit.


Features:

  • Attaches 6 leaf springs (sold separately) to your trailer frame
    • Hangers sold separately
  • Includes:
    • (4) 13-1/8" Long straight equalizers (13-44)
      • 7/8" Diameter center hole for mounting to hanger
      • 9/16" Diameter side hole for attaching to spring
    • (6) 3-1/4" Long x 5/16" diameter spring keeper bolt (7-7)
    • (6) 5/16" Diameter locknuts (6-11)
    • (6) 3-1/2" Long x 9/16" diameter shackle bolts (91635B)
    • (6) 9/16" Diameter locknuts (916DLN)
    • (4) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1)
    • (4) 7/8" Diameter locknuts for 7-1-1 (6-111)
  • Use in conjunction with H302 for complete kit
    • H302 contains front, center and rear hangers
  • Designed for use on trailers with triple, 3,500-lb to 8,000-lb axles
  • Does not include components for mounting axle to springs


AP316 Triple Axle Hanger Kit - 2" Slipper Springs - 3,500 lbs to 8,000 lbs





Video of Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Breaking Down the Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Dexter Triple Axle Trailer Equalizer Kit for two inch wide slipper springs. Now, this kit here will include four of these 13 and one eighth inch long equalizers and all the necessary bolts and hardware you need for suspending your lease spring from your trailer frame. Now, when this is used with the part number H302 that we sell separately, it'll give you a complete triple axle kit. Just to pop up an insert, that H302 kit would be that insert I just pictured there, and it contains the front, the center, and the rear hangar, and the mounting hardware for that.

So basically, if you order that kit along with this kit, that would get you a complete triple axle kit. And we actually do sell it all together as a kit that goes by part number AP316-H302. Now, this kit here is designed for use on trailers with triple 3,500 pound to 8,000 pound axles. This will allow you to attach six slipper springs to your trailer frame. Now the slipper springs, we do sell separately on our website.

This kit right here is what'll include, I'm gonna go through all these parts, but basically we'll start with the equalizers. They are a 13 and one eight inch long straight equalizer. And again, if we put our ruler or tape measure on that, show you there's your 13 and one eighth inch measurement. So when these are used, it'll allow for 36 inches between your axles. They do have the center diameter hole of seven eights of an inch diameter.

That's for mounting to the hangar. Over here they have a nine 16 diameter spring eye hole for attaching to the spring. And down here they have a five 16th diameter spring keeper hole. Does come with all the hardware here. Start with the spring keeper bolts.

They're a three and a quarter inch long by five 16th diameter. Six of them. Keeper bolts with the lock nuts included. Over here we have six of the three and a half inch long nine 16th diameter spring eye bolts with the lock nuts. And then right in here, we have the four four and a half inch long by seven eights inch diameter wet equalizer bolts with the lock nuts. And when I say wet equalizer bolts, if you notice on the end they do have a grease Zerk fitting, and that allows you to attach a grease gun to that, and pump grease in there for easy lubrication of the bolts. Now, this kit does not include the components for mounting your axle to your springs. But that should do it for the review on the Dexter Triple Axle Trailer Equalizer Kit for two inch wide slipper springs.

Customer Satisfaction Score:


Customer Reviews

Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers - AP316

Average Customer Rating:  4.7 out of 5 stars   (7 Customer Reviews)

Kit includes 13-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H302 hangers for a complete triple-axle kit.

by:

Fast shipping, heavy duty product, worked great on my tripple 7,000 lb. axles. Thank you. Allen

Allen S. profile picture

Allen S.

5/24/2014

I have used the trailer for about a yr. now. The suspension is holding up very well, under my 1150 case bull dozer, and back hoe that I haul with it. I am very happy with my purchase of the suspension, for this low-boy trailer. It pulls better than it did before, and tracks better also. Thank you ! Allen S



by:

Come in a redneck box, my local redneck dealer was out of stock and these items didn't cost half as much local



by:

Very quick shipping and easy to deal with.Will be buying again!!



by:

Fast shipping



by:



by:



by:


7
7

See what our Experts say about this Redline Trailer Suspension Parts

  • Availability of 12 inch Long Slipper Equalizer
    We have the Equalizer for 2" Wide Slipper Springs - 12" Long # TREQ4541 which is similar to the kit you mentioned but it's a 12 inch equalizer for slipper springs sold individually.
    view full answer...
  • 12 Inch Slipper Spring Equalizer Kit Recommendation
    The only 12 inch slipper spring equalizer we offer is the part # E4541-Z. For shackle bolts you would need the part # 166079, for equalizer bolts you would need # TRFA71063, cotter pin part # 165649, and for spring keeper bolts part # 7-7. We do not have all of this in a kit though.
    view full answer...
  • Redline Triple-Axle Slipper Springs Equalizer Spacing
    In order to find the correct spacing for your hangers item # AP316, equalizer kit item # H302, and your 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long item # e74SR you will need to mock up all the parts to determine the proper locations prior to permanently installing everything. The equalizer you referenced item # AP316 are 10-1/8" and I have attached a picture to show the bolt spaces. When using 2" slipper springs on your triple axle trailer the distance between...
    view full answer...
    Image 1 for
  • How to Determine Frame Width When Building Trailer with 7K Axles
    I would be more than happy to help you get everything together that you need for the suspension on your gooseneck trailer for your tiny house! It sounds like you're needing the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs # 8327834-EB which has a hub face measurement of 95" and a spring center measurement of 80". This means that the frame of your trailer needs to be 80" apart so that your leaf springs will line up with your trailer suspension. When...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.