Black powder coated, 16" steel dual trailer wheel with 5.35" offset features an 8 on 6-1/2 bolt pattern and meets Department of Transportation standards.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this 16 inch by 6 inch black dual steel wheel with an offset, has an 8 on 6-1/2 inch bolt pattern and a 4.77 inch hub dot pilot diameter. Now, this wheel is a dual wheel, so it can be used as either an inner or an outer wheel on dually trucks, buses, or trailers. Now, depending on which way you install it, it's either gonna have a 5.35 inch positive offset if you use it as an inner wheel, which would be this position right here, or if you turn it around and put it into a outer wheel, then that net offset would change to a 5.35 inch negative offset. This wheel is a sturdy steel construction. If you notice it does have the four hand holes.
It does have a black powder coat finish over an e-coat primer, gives you excellent corrosion resistance, and it is a high-quality wheel, meets the DOT Department of Transportation specifications. Now, we mentioned the hub pilot diameter. That's the diameter of this large hole here. This is a hub piloted wheel, so in other words, it will center on the axle hub off this pilot hole diameter. So because of that, the bolt holes will be non-chamfered.
So that requires a flange nut, a 5/8 inch by 18 size flange nut to attach this to the vehicle. And the flange nuts we do sell separately, the part number 95188. And I just wanna pop up an insert to show you. There's what the flange nuts would look like. Now, a few dimensions on this, we're gonna measure the diameter, which is always measured inside the inside.
So if we take our tape measure and if we go straight across, there's your 16 inch diameter. And if we measure the width, the width is the same way inside the inside or bead seat to bead seat, and you'll be able to see there's your six inch wide wheel. Now, the bolt pattern on this wheel is a 8 on 6-1/2 inch bolt pattern. And if you wanna measure the bolt pattern on a wheel like this that's an even number of lugs, it's pretty easy because the lug holes are directly across from each other. So when you go to measure it, just pick any hole, let's say this one, and measure from the center of this hole to the center of the hole directly across from it.
So on this wheel, it'll measure 6-1/2 inches, which means this is an 8 lug 6-1/2 inch bolt pattern. We mentioned the offset can be either a plus or a minus 5.35 inches, and the offset is always measured from the center line of the wheel to the mounting surface. So depending on how this wheel is used, it would either be a positive or negative offset. Weight capacity on this wheel is 3,860 pounds. But that should do it for the review on this 16 inch by 6 inch black dual steel wheel with an offset, 8 on 6-1/2 inch bolt pattern and the 4.77 inch hub pilot diameter.
Average Customer Rating: 4.8 out of 5 stars (100 Customer Reviews)
Black powder coated, 16" steel dual trailer wheel with 5.35" offset features an 8 on 6-1/2 bolt pattern and meets Department of Transportation standards.The wheels just showed up and they seem to be well built, stout wheels. Plus they arrived in just two days.
You solved a problem I had with local deleted inventory. My order came as fast as I could ever expect. Thanks.
ARRIVED TWO DAYS BEFORE THE ESTIMATED DATE. ETRAILER SENT THE SHIP NOTICE THE MORNING AFTER I ORDERED IT AT 11:50 PM. [9 HRS LATER !!??] TALK ABOUT SERVICE! CAME PACKED IN BROWN PAPER WITHOUT A SCRATCH AND THE PAINT SURFACE IS CREAMY THICK AND PERFECT. FOR MY SPARE TIRE, AS I BOUGHT A TRAILER WITH A SPARE TIRE, BUT NOT ON A WHEEL [??] [WHAT GOOD IS THAT ON THE SIDE OF THE ROAD?] NOT MY FIRST PURCHASE FROM ETRAILER, SO I KNEW I WOULD BE HAPPY. YOU CAN'T GO WRONG. THEY DID NOT PAY ME TO SAY THIS!
Excellent product..would buy again
Product (a trailer wheel, no tire) arrived quickly and is what I needed. I ordered by phone and my only comment is that it did not come with a full valve. Would be good to know. The rim was very inexpensive at $[XX] but having to order a valve added 50% to the cost.
Exactly as advertised, we are using these on a custom piece of planting equipment and they are heavy duty and have a great finish as well. Great value.
Great service very helpful over the phone and they made sure I was getting the right tires for my use and the right size rims for my trailer. My experience after installing new tires and rims on my snowmobile trailer I no longer had the vibration I was feeling while towing so the new tires made a tremendous difference in how it towed the trailer. Thanks again for your assistance
Very nice looking and well made rims. Far shipping grin etrailer. One negative is mfg. placed sticker in bread area and it's prone to shredding when trying to remove. Sticker needs to be thicker so it pulls clean.
We have been using these wheels for years, I'm very happy etrailer has been there for us when other suppliers are low on stock.
Easy ordering good pricing and fast del ivery!
I ordered a 5 hole 8 inch steel wheel for my small trailer. The video that was provided on your website was instrumental in helping me determine the right wheel with precision. It was reasonably priced, it was shipped quickly, and I am happy with the merchandise and the whole process.
I was a little worried when I ordered these rims thinking that I would never be able to find the correct size I needed. The trailer I have is very old and does not appear to be a brand name. But when I received the wheels the tires I had fit perfectly. Thanks for a great product at really great prices.
The wheels were exactly what I had been looking for on a lot of sitess. They we’re shiny and the cheapest.
Product shipped quickly and was exactly what was expected. This is my first order with eTrailer.com. Their notifications were informative and useful, product was out the door quickly. Notifications on order, shipment with tracking, etc. Products were packed well for the ride.
No complaints, they will be a first stop for similar products in the future.
Ordered 4 hole rims, but later discovered trailer has 5 hole rims. Already installed stem, and mounted tires. Don't think I'm able to return them, I ordered correct rims.
Replacement wheel for snowmobile trailer. Wheel arrived quickly, mounted the tire and trailer is good to go.
Rim was exactly the right one :) thanks for your speedy delivery.
I'm going to order another one ( My Bad ) I should have taken a closer
look at the other side.
I removed trailer axle from very old "junk" boat trailer. and Modified (cut weld and painted) to fit under a saw mill we extended to 21 feet. for cutting logs and mobility around 180 acre farm with lots of different trees.
Exactly what I needed for a spare tire for my 5’ x 8’ utility trailer. Came a day earlier than originally scheduled.
Purchased this rim a year ago. Good quality, fast shipping. Easy to order and detailed product info and detentions. I recommend etrailer.
Some minor dings around the bead flange, I would imagine these are shipped around all together in a big bin, but nothing that affected the functionality. Bead set nicely, the assembly has held the same pressure for nearly 2 weeks now. eTrailer does good stuff, decent communication and great prices. Will do business here again.
The product arrived well packaged and in great condition. It even arrived a day earlier than expected. The price was great and customer service was outstanding! I will highly recommend Etrailer.com to all my friends and family!!
Just a couple simple wheels. Service and web site were excellent. Tracking and follow up were great. Would and have recommended etrailer to my friends.
Very happy with my purchase of 4 rims. Installed very easily and looks great. Very affordable prices too.
I bought 4 rims, 4 spindles, 4 hubs, all were super easy to assemble and work great.
Very happy with my purchase of 4 rims. Installed very easily and looks great. Very affordable prices too.
I bought 4 rims, 4 spindles, 4 hubs, all were super easy to assemble and work great.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.